FeeDistributor

{{
  "language": "Solidity",
  "sources": {
    "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";

struct MessagingParams {
    uint32 dstEid;
    bytes32 receiver;
    bytes message;
    bytes options;
    bool payInLzToken;
}

struct MessagingReceipt {
    bytes32 guid;
    uint64 nonce;
    MessagingFee fee;
}

struct MessagingFee {
    uint256 nativeFee;
    uint256 lzTokenFee;
}

struct Origin {
    uint32 srcEid;
    bytes32 sender;
    uint64 nonce;
}

interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
    event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);

    event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);

    event PacketDelivered(Origin origin, address receiver);

    event LzReceiveAlert(
        address indexed receiver,
        address indexed executor,
        Origin origin,
        bytes32 guid,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    event LzTokenSet(address token);

    event DelegateSet(address sender, address delegate);

    function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);

    function send(
        MessagingParams calldata _params,
        address _refundAddress
    ) external payable returns (MessagingReceipt memory);

    function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;

    function verifiable(Origin calldata _origin, address _receiver) external view returns (bool);

    function initializable(Origin calldata _origin, address _receiver) external view returns (bool);

    function lzReceive(
        Origin calldata _origin,
        address _receiver,
        bytes32 _guid,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;

    // oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
    function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;

    function setLzToken(address _lzToken) external;

    function lzToken() external view returns (address);

    function nativeToken() external view returns (address);

    function setDelegate(address _delegate) external;
}
"
    },
    "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessageLibManager.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

struct SetConfigParam {
    uint32 eid;
    uint32 configType;
    bytes config;
}

interface IMessageLibManager {
    struct Timeout {
        address lib;
        uint256 expiry;
    }

    event LibraryRegistered(address newLib);
    event DefaultSendLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
    event SendLibrarySet(address sender, uint32 eid, address newLib);
    event ReceiveLibrarySet(address receiver, uint32 eid, address newLib);
    event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);

    function registerLibrary(address _lib) external;

    function isRegisteredLibrary(address _lib) external view returns (bool);

    function getRegisteredLibraries() external view returns (address[] memory);

    function setDefaultSendLibrary(uint32 _eid, address _newLib) external;

    function defaultSendLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function defaultReceiveLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;

    function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);

    function isSupportedEid(uint32 _eid) external view returns (bool);

    function isValidReceiveLibrary(address _receiver, uint32 _eid, address _lib) external view returns (bool);

    /// ------------------- OApp interfaces -------------------
    function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;

    function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);

    function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);

    function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);

    function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _expiry) external;

    function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);

    function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;

    function getConfig(
        address _oapp,
        address _lib,
        uint32 _eid,
        uint32 _configType
    ) external view returns (bytes memory config);
}
"
    },
    "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessagingChannel.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingChannel {
    event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
    event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
    event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);

    function eid() external view returns (uint32);

    // this is an emergency function if a message cannot be verified for some reasons
    // required to provide _nextNonce to avoid race condition
    function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;

    function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);

    function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);

    function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);

    function inboundPayloadHash(
        address _receiver,
        uint32 _srcEid,
        bytes32 _sender,
        uint64 _nonce
    ) external view returns (bytes32);

    function lazyInboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
}
"
    },
    "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessagingComposer.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingComposer {
    event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
    event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
    event LzComposeAlert(
        address indexed from,
        address indexed to,
        address indexed executor,
        bytes32 guid,
        uint16 index,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    function composeQueue(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index
    ) external view returns (bytes32 messageHash);

    function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;

    function lzCompose(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;
}
"
    },
    "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessagingContext.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingContext {
    function isSendingMessage() external view returns (bool);

    function getSendContext() external view returns (uint32 dstEid, address sender);
}
"
    },
    "@layerzerolabs/oapp-evm/contracts/oapp/interfaces/IOAppCore.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";

/**
 * @title IOAppCore
 */
interface IOAppCore {
    // Custom error messages
    error OnlyPeer(uint32 eid, bytes32 sender);
    error NoPeer(uint32 eid);
    error InvalidEndpointCall();
    error InvalidDelegate();

    // Event emitted when a peer (OApp) is set for a corresponding endpoint
    event PeerSet(uint32 eid, bytes32 peer);

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     */
    function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);

    /**
     * @notice Retrieves the LayerZero endpoint associated with the OApp.
     * @return iEndpoint The LayerZero endpoint as an interface.
     */
    function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);

    /**
     * @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @return peer The peer address (OApp instance) associated with the corresponding endpoint.
     */
    function peers(uint32 _eid) external view returns (bytes32 peer);

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     */
    function setPeer(uint32 _eid, bytes32 _peer) external;

    /**
     * @notice Sets the delegate address for the OApp Core.
     * @param _delegate The address of the delegate to be set.
     */
    function setDelegate(address _delegate) external;
}
"
    },
    "@layerzerolabs/oapp-evm/contracts/oapp/OAppCore.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";

/**
 * @title OAppCore
 * @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
 */
abstract contract OAppCore is IOAppCore, Ownable {
    // The LayerZero endpoint associated with the given OApp
    ILayerZeroEndpointV2 public immutable endpoint;

    // Mapping to store peers associated with corresponding endpoints
    mapping(uint32 eid => bytes32 peer) public peers;

    /**
     * @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
     * @param _endpoint The address of the LOCAL Layer Zero endpoint.
     * @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
     *
     * @dev The delegate typically should be set as the owner of the contract.
     */
    constructor(address _endpoint, address _delegate) {
        endpoint = ILayerZeroEndpointV2(_endpoint);

        if (_delegate == address(0)) revert InvalidDelegate();
        endpoint.setDelegate(_delegate);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
        _setPeer(_eid, _peer);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
        peers[_eid] = _peer;
        emit PeerSet(_eid, _peer);
    }

    /**
     * @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
     * ie. the peer is set to bytes32(0).
     * @param _eid The endpoint ID.
     * @return peer The address of the peer associated with the specified endpoint.
     */
    function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
        bytes32 peer = peers[_eid];
        if (peer == bytes32(0)) revert NoPeer(_eid);
        return peer;
    }

    /**
     * @notice Sets the delegate address for the OApp.
     * @param _delegate The address of the delegate to be set.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
     */
    function setDelegate(address _delegate) public onlyOwner {
        endpoint.setDelegate(_delegate);
    }
}
"
    },
    "@layerzerolabs/oapp-evm/contracts/oapp/OAppSender.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MessagingParams, MessagingFee, MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";

/**
 * @title OAppSender
 * @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
 */
abstract contract OAppSender is OAppCore {
    using SafeERC20 for IERC20;

    // Custom error messages
    error NotEnoughNative(uint256 msgValue);
    error LzTokenUnavailable();

    // @dev The version of the OAppSender implementation.
    // @dev Version is bumped when changes are made to this contract.
    uint64 internal constant SENDER_VERSION = 1;

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     *
     * @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
     * ie. this is a SEND only OApp.
     * @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
     */
    function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
        return (SENDER_VERSION, 0);
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
     * @return fee The calculated MessagingFee for the message.
     *      - nativeFee: The native fee for the message.
     *      - lzTokenFee: The LZ token fee for the message.
     */
    function _quote(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        bool _payInLzToken
    ) internal view virtual returns (MessagingFee memory fee) {
        return
            endpoint.quote(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
                address(this)
            );
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _fee The calculated LayerZero fee for the message.
     *      - nativeFee: The native fee.
     *      - lzTokenFee: The lzToken fee.
     * @param _refundAddress The address to receive any excess fee values sent to the endpoint.
     * @return receipt The receipt for the sent message.
     *      - guid: The unique identifier for the sent message.
     *      - nonce: The nonce of the sent message.
     *      - fee: The LayerZero fee incurred for the message.
     */
    function _lzSend(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        MessagingFee memory _fee,
        address _refundAddress
    ) internal virtual returns (MessagingReceipt memory receipt) {
        // @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
        uint256 messageValue = _payNative(_fee.nativeFee);
        if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);

        return
            // solhint-disable-next-line check-send-result
            endpoint.send{ value: messageValue }(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0),
                _refundAddress
            );
    }

    /**
     * @dev Internal function to pay the native fee associated with the message.
     * @param _nativeFee The native fee to be paid.
     * @return nativeFee The amount of native currency paid.
     *
     * @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
     * this will need to be overridden because msg.value would contain multiple lzFees.
     * @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
     * @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
     * @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
     */
    function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
        if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
        return _nativeFee;
    }

    /**
     * @dev Internal function to pay the LZ token fee associated with the message.
     * @param _lzTokenFee The LZ token fee to be paid.
     *
     * @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
     * @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
     */
    function _payLzToken(uint256 _lzTokenFee) internal virtual {
        // @dev Cannot cache the token because it is not immutable in the endpoint.
        address lzToken = endpoint.lzToken();
        if (lzToken == address(0)) revert LzTokenUnavailable();

        // Pay LZ token fee by sending tokens to the endpoint.
        IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
    }
}
"
    },
    "@layerzerolabs/oft-evm/contracts/interfaces/IOFT.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { MessagingReceipt, MessagingFee } from "@layerzerolabs/oapp-evm/contracts/oapp/OAppSender.sol";

/**
 * @dev Struct representing token parameters for the OFT send() operation.
 */
struct SendParam {
    uint32 dstEid; // Destination endpoint ID.
    bytes32 to; // Recipient address.
    uint256 amountLD; // Amount to send in local decimals.
    uint256 minAmountLD; // Minimum amount to send in local decimals.
    bytes extraOptions; // Additional options supplied by the caller to be used in the LayerZero message.
    bytes composeMsg; // The composed message for the send() operation.
    bytes oftCmd; // The OFT command to be executed, unused in default OFT implementations.
}

/**
 * @dev Struct representing OFT limit information.
 * @dev These amounts can change dynamically and are up the specific oft implementation.
 */
struct OFTLimit {
    uint256 minAmountLD; // Minimum amount in local decimals that can be sent to the recipient.
    uint256 maxAmountLD; // Maximum amount in local decimals that can be sent to the recipient.
}

/**
 * @dev Struct representing OFT receipt information.
 */
struct OFTReceipt {
    uint256 amountSentLD; // Amount of tokens ACTUALLY debited from the sender in local decimals.
    // @dev In non-default implementations, the amountReceivedLD COULD differ from this value.
    uint256 amountReceivedLD; // Amount of tokens to be received on the remote side.
}

/**
 * @dev Struct representing OFT fee details.
 * @dev Future proof mechanism to provide a standardized way to communicate fees to things like a UI.
 */
struct OFTFeeDetail {
    int256 feeAmountLD; // Amount of the fee in local decimals.
    string description; // Description of the fee.
}

/**
 * @title IOFT
 * @dev Interface for the OftChain (OFT) token.
 * @dev Does not inherit ERC20 to accommodate usage by OFTAdapter as well.
 * @dev This specific interface ID is '0x02e49c2c'.
 */
interface IOFT {
    // Custom error messages
    error InvalidLocalDecimals();
    error SlippageExceeded(uint256 amountLD, uint256 minAmountLD);
    error AmountSDOverflowed(uint256 amountSD);

    // Events
    event OFTSent(
        bytes32 indexed guid, // GUID of the OFT message.
        uint32 dstEid, // Destination Endpoint ID.
        address indexed fromAddress, // Address of the sender on the src chain.
        uint256 amountSentLD, // Amount of tokens sent in local decimals.
        uint256 amountReceivedLD // Amount of tokens received in local decimals.
    );
    event OFTReceived(
        bytes32 indexed guid, // GUID of the OFT message.
        uint32 srcEid, // Source Endpoint ID.
        address indexed toAddress, // Address of the recipient on the dst chain.
        uint256 amountReceivedLD // Amount of tokens received in local decimals.
    );

    /**
     * @notice Retrieves interfaceID and the version of the OFT.
     * @return interfaceId The interface ID.
     * @return version The version.
     *
     * @dev interfaceId: This specific interface ID is '0x02e49c2c'.
     * @dev version: Indicates a cross-chain compatible msg encoding with other OFTs.
     * @dev If a new feature is added to the OFT cross-chain msg encoding, the version will be incremented.
     * ie. localOFT version(x,1) CAN send messages to remoteOFT version(x,1)
     */
    function oftVersion() external view returns (bytes4 interfaceId, uint64 version);

    /**
     * @notice Retrieves the address of the token associated with the OFT.
     * @return token The address of the ERC20 token implementation.
     */
    function token() external view returns (address);

    /**
     * @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
     * @return requiresApproval Needs approval of the underlying token implementation.
     *
     * @dev Allows things like wallet implementers to determine integration requirements,
     * without understanding the underlying token implementation.
     */
    function approvalRequired() external view returns (bool);

    /**
     * @notice Retrieves the shared decimals of the OFT.
     * @return sharedDecimals The shared decimals of the OFT.
     */
    function sharedDecimals() external view returns (uint8);

    /**
     * @notice Provides the fee breakdown and settings data for an OFT. Unused in the default implementation.
     * @param _sendParam The parameters for the send operation.
     * @return limit The OFT limit information.
     * @return oftFeeDetails The details of OFT fees.
     * @return receipt The OFT receipt information.
     */
    function quoteOFT(
        SendParam calldata _sendParam
    ) external view returns (OFTLimit memory, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory);

    /**
     * @notice Provides a quote for the send() operation.
     * @param _sendParam The parameters for the send() operation.
     * @param _payInLzToken Flag indicating whether the caller is paying in the LZ token.
     * @return fee The calculated LayerZero messaging fee from the send() operation.
     *
     * @dev MessagingFee: LayerZero msg fee
     *  - nativeFee: The native fee.
     *  - lzTokenFee: The lzToken fee.
     */
    function quoteSend(SendParam calldata _sendParam, bool _payInLzToken) external view returns (MessagingFee memory);

    /**
     * @notice Executes the send() operation.
     * @param _sendParam The parameters for the send operation.
     * @param _fee The fee information supplied by the caller.
     *      - nativeFee: The native fee.
     *      - lzTokenFee: The lzToken fee.
     * @param _refundAddress The address to receive any excess funds from fees etc. on the src.
     * @return receipt The LayerZero messaging receipt from the send() operation.
     * @return oftReceipt The OFT receipt information.
     *
     * @dev MessagingReceipt: LayerZero msg receipt
     *  - guid: The unique identifier for the sent message.
     *  - nonce: The nonce of the sent message.
     *  - fee: The LayerZero fee incurred for the message.
     */
    function send(
        SendParam calldata _sendParam,
        MessagingFee calldata _fee,
        address _refundAddress
    ) external payable returns (MessagingReceipt memory, OFTReceipt memory);
}
"
    },
    "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
"
    },
    "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized != type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}
"
    },
    "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
"
    },
    "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
"
    },
    "@openzeppelin/contracts/access/Ownable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
"
    },
    "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}
"
    },
    "@open