DAIToUSDC

{{
  "language": "Solidity",
  "sources": {
    "src/DAITOUSDC.sol": {
      "content": "// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.18;

import {BaseHealthCheck, ERC20} from "@periphery/Bases/HealthCheck/BaseHealthCheck.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {UniswapV3Swapper} from "@periphery/swappers/UniswapV3Swapper.sol";

import {IExchange, IPSM} from "./interfaces/IPSM.sol";
import {IStrategyInterface as IVault} from "./interfaces/IStrategyInterface.sol";

contract DAIToUSDC is BaseHealthCheck, UniswapV3Swapper {
    using SafeERC20 for ERC20;

    uint256 private constant WAD = 1e18;
    uint256 private constant SCALER = 1e12;

    address private constant USDC = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
    address private constant PSM = 0xf6e72Db5454dd049d0788e411b06CfAF16853042; //LITE-PSM

    address public immutable VAULT;
    address public immutable DEPOSITOR;

    uint256 public swapSlippageBPS; //in BPS
    uint256 public maxAcceptableFeeOutPSM; //in WAD

    constructor(
        address _asset,
        string memory _name,
        address _vault,
        address _depositor
    ) BaseHealthCheck(_asset, _name) {
        VAULT = _vault;
        DEPOSITOR = _depositor;

        //use setMaxAcceptableFeeOutPSM(0) to force swap through Uniswap
        //0.05% expressed in WAD. If the PSM fee out is equal or bigger than this amount,
        //it is probably better to swap through the uniswap pool, accepting slippage.
        maxAcceptableFeeOutPSM = 5e14 + 1;
        swapSlippageBPS = 50; //0.5% expressed in BPS. Allow a slippage of 0.5% for swapping through uniswap.

        // Set uni swapper values
        base = _asset;
        _setUniFees(_asset, USDC, 100);

        //approvals:
        ERC20(_asset).forceApprove(PSM, type(uint).max); //approve the PSM
        ERC20(USDC).forceApprove(PSM, type(uint).max); //approve the PSM
        ERC20(USDC).forceApprove(VAULT, type(uint).max);
    }

    /*//////////////////////////////////////////////////////////////
                INTERNAL
    //////////////////////////////////////////////////////////////*/

    function availableDepositLimit(
        address _owner
    ) public view override returns (uint256) {
        //only allow deposits if PSM fee in and fee out are 0
        if (
            _owner == DEPOSITOR && IPSM(PSM).tin() == 0 && IPSM(PSM).tout() == 0
        ) {
            return IVault(VAULT).maxDeposit(address(this)) * SCALER;
        } else {
            return 0;
        }
    }

    function _deployFunds(uint256 _amount) internal override {
        //swap DAI --> USDC 1:1 through PSM (in USDC amount)
        IPSM(PSM).buyGem(address(this), _amount / SCALER);
        IVault(VAULT).deposit(_balanceOfUSDC(), address(this));
    }

    function availableWithdrawLimit(
        address /*_owner*/
    ) public view override returns (uint256) {
        return _balanceOfAsset() + _vaultsMaxWithdraw() * SCALER;
    }

    function _freeFunds(uint256 _amount) internal override {
        // Scale from DAI to USDC
        uint256 amountUSDC = _amount / SCALER;

        // Min of our balance or converting to shares rounding up
        amountUSDC = Math.min(
            _balanceOfVault(),
            IVault(VAULT).previewWithdraw(amountUSDC)
        );

        // Redeem shares, save actual amount withdrawn
        amountUSDC = IVault(VAULT).redeem(
            amountUSDC,
            address(this),
            address(this)
        ); //VAULT --> USDC

        uint256 feeOut = IPSM(PSM).tout(); //in WAD
        if (feeOut >= maxAcceptableFeeOutPSM) {
            //if PSM fee is greater than max
            //swap USDC --> DAI through Uniswap (in USDC amount)
            _swapFrom(
                USDC,
                address(asset),
                amountUSDC,
                ((amountUSDC * (MAX_BPS - swapSlippageBPS)) / MAX_BPS) * SCALER
            );
        } else {
            //swap USDC --> DAI 1:1 through PSM (in USDC amount).
            IPSM(PSM).sellGem(address(this), amountUSDC);
        }
    }

    function _harvestAndReport()
        internal
        override
        returns (uint256 _totalAssets)
    {
        if (!TokenizedStrategy.isShutdown()) {
            uint256 currentBalance = _balanceOfAsset();
            if (
                currentBalance > WAD &&
                availableDepositLimit(DEPOSITOR) > currentBalance
            ) {
                _deployFunds(currentBalance);
            }
        }

        _totalAssets =
            _balanceOfAsset() +
            (_balanceOfUSDC() + _valueOfVault()) *
            SCALER;
    }

    function _balanceOfAsset() internal view returns (uint256) {
        return asset.balanceOf(address(this));
    }

    function _balanceOfUSDC() internal view returns (uint256) {
        return ERC20(USDC).balanceOf(address(this));
    }

    function _balanceOfVault() internal view returns (uint256) {
        return ERC20(VAULT).balanceOf(address(this));
    }

    function _valueOfVault() internal view returns (uint256) {
        return IVault(VAULT).convertToAssets(_balanceOfVault());
    }

    function _vaultsMaxWithdraw() internal view returns (uint256) {
        return
            IVault(VAULT).convertToAssets(
                IVault(VAULT).maxRedeem(address(this))
            );
    }

    // Set the maximum acceptable fee out of the PSM before we automatically switch to Uniswap swapping.
    // Set this to 0 to force swapping through uniswap
    function setMaxAcceptableFeeOutPSM(
        uint256 _maxAcceptableFeeOutPSM
    ) external onlyManagement {
        require(_maxAcceptableFeeOutPSM <= WAD);
        maxAcceptableFeeOutPSM = _maxAcceptableFeeOutPSM;
    }

    // Set the slippage for deposits in basis points.
    function setSwapSlippageBPS(
        uint256 _swapSlippageBPS
    ) external onlyManagement {
        require(_swapSlippageBPS <= MAX_BPS);
        swapSlippageBPS = _swapSlippageBPS;
    }

    /*//////////////////////////////////////////////////////////////
                EMERGENCY
    //////////////////////////////////////////////////////////////*/

    /// @notice In case of an emergencyWithdraw with fees, management needs to call a report right after (ideally bundled).
    function _emergencyWithdraw(uint256 _amount) internal override {
        if (_amount == type(uint256).max) {
            _amount = _valueOfVault() * SCALER;
        }
        _freeFunds(_amount);
    }

    /// @notice If possible, always call emergencyWithdraw() instead of this. This function is to be called only if emergencyWithdraw() were to ever revert:
    ///     In that case, management needs to first shutdown the strategy, then call emergencyWithdrawDirect() with off-chain calculated amounts,
    ///     and then immediately call a report. In case of an emergencyWithdraw with fees, management needs to call a report right after (ideally bundled).
    /// @param _sharesVault the amount of VAULT shares that should be redeemed.
    /// @param _usePSM Set this to true to use the PSM to swap (preferred). Otherwise this will use Uniswap to swap (emergency).
    /// @param _swapAmount Amount in USDC.
    function emergencyWithdrawDirect(
        uint256 _sharesVault,
        bool _usePSM,
        uint256 _swapAmount
    ) external onlyEmergencyAuthorized {
        if (_sharesVault > 0) {
            _sharesVault = Math.min(_sharesVault, _balanceOfVault());
            
            IVault(VAULT).redeem(_sharesVault, address(this), address(this));
        }
        if (_swapAmount == 0) return;

        if (_swapAmount == type(uint256).max) {
            _swapAmount = _balanceOfUSDC();
        }

        if (_usePSM) {
            IPSM(PSM).sellGem(address(this), _swapAmount); //swapAmount in USDC
        } else {
            _swapFrom(
                USDC,
                address(asset),
                _swapAmount,
                ((_swapAmount * (MAX_BPS - swapSlippageBPS)) / MAX_BPS) * SCALER
            );
        }
    }
}
"
    },
    "lib/tokenized-strategy-periphery/src/Bases/HealthCheck/BaseHealthCheck.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {BaseStrategy, ERC20} from "@tokenized-strategy/BaseStrategy.sol";

/**
 *   @title Base Health Check
 *   @author Yearn.finance
 *   @notice This contract can be inherited by any Yearn
 *   V3 strategy wishing to implement a health check during
 *   the `report` function in order to prevent any unexpected
 *   behavior from being permanently recorded as well as the
 *   `checkHealth` modifier.
 *
 *   A strategist simply needs to inherit this contract. Set
 *   the limit ratios to the desired amounts and then
 *   override `_harvestAndReport()` just as they otherwise
 *  would. If the profit or loss that would be recorded is
 *   outside the acceptable bounds the tx will revert.
 *
 *   The healthcheck does not prevent a strategy from reporting
 *   losses, but rather can make sure manual intervention is
 *   needed before reporting an unexpected loss or profit.
 */
abstract contract BaseHealthCheck is BaseStrategy {
    // Can be used to determine if a healthcheck should be called.
    // Defaults to true;
    bool public doHealthCheck = true;

    uint256 internal constant MAX_BPS = 10_000;

    // Default profit limit to 100%.
    uint16 private _profitLimitRatio = uint16(MAX_BPS);

    // Defaults loss limit to 0.
    uint16 private _lossLimitRatio;

    constructor(
        address _asset,
        string memory _name
    ) BaseStrategy(_asset, _name) {}

    /**
     * @notice Returns the current profit limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current profit limit ratio.
     */
    function profitLimitRatio() public view returns (uint256) {
        return _profitLimitRatio;
    }

    /**
     * @notice Returns the current loss limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current loss limit ratio.
     */
    function lossLimitRatio() public view returns (uint256) {
        return _lossLimitRatio;
    }

    /**
     * @notice Set the `profitLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function setProfitLimitRatio(
        uint256 _newProfitLimitRatio
    ) external onlyManagement {
        _setProfitLimitRatio(_newProfitLimitRatio);
    }

    /**
     * @dev Internally set the profit limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function _setProfitLimitRatio(uint256 _newProfitLimitRatio) internal {
        require(_newProfitLimitRatio > 0, "!zero profit");
        require(_newProfitLimitRatio <= type(uint16).max, "!too high");
        _profitLimitRatio = uint16(_newProfitLimitRatio);
    }

    /**
     * @notice Set the `lossLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function setLossLimitRatio(
        uint256 _newLossLimitRatio
    ) external onlyManagement {
        _setLossLimitRatio(_newLossLimitRatio);
    }

    /**
     * @dev Internally set the loss limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function _setLossLimitRatio(uint256 _newLossLimitRatio) internal {
        require(_newLossLimitRatio < MAX_BPS, "!loss limit");
        _lossLimitRatio = uint16(_newLossLimitRatio);
    }

    /**
     * @notice Turns the healthcheck on and off.
     * @dev If turned off the next report will auto turn it back on.
     * @param _doHealthCheck Bool if healthCheck should be done.
     */
    function setDoHealthCheck(bool _doHealthCheck) public onlyManagement {
        doHealthCheck = _doHealthCheck;
    }

    /**
     * @notice OVerrides the default {harvestAndReport} to include a healthcheck.
     * @return _totalAssets New totalAssets post report.
     */
    function harvestAndReport()
        external
        override
        onlySelf
        returns (uint256 _totalAssets)
    {
        // Let the strategy report.
        _totalAssets = _harvestAndReport();

        // Run the healthcheck on the amount returned.
        _executeHealthCheck(_totalAssets);
    }

    /**
     * @dev To be called during a report to make sure the profit
     * or loss being recorded is within the acceptable bound.
     *
     * @param _newTotalAssets The amount that will be reported.
     */
    function _executeHealthCheck(uint256 _newTotalAssets) internal virtual {
        if (!doHealthCheck) {
            doHealthCheck = true;
            return;
        }

        // Get the current total assets from the implementation.
        uint256 currentTotalAssets = TokenizedStrategy.totalAssets();

        if (_newTotalAssets > currentTotalAssets) {
            require(
                ((_newTotalAssets - currentTotalAssets) <=
                    (currentTotalAssets * uint256(_profitLimitRatio)) /
                        MAX_BPS),
                "healthCheck"
            );
        } else if (currentTotalAssets > _newTotalAssets) {
            require(
                (currentTotalAssets - _newTotalAssets <=
                    ((currentTotalAssets * uint256(_lossLimitRatio)) /
                        MAX_BPS)),
                "healthCheck"
            );
        }
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/utils/math/Math.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}
"
    },
    "lib/tokenized-strategy-periphery/src/swappers/UniswapV3Swapper.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import {ISwapRouter} from "../interfaces/Uniswap/V3/ISwapRouter.sol";
import {BaseSwapper} from "./BaseSwapper.sol";

/**
 *   @title UniswapV3Swapper
 *   @author Yearn.finance
 *   @dev This is a simple contract that can be inherited by any tokenized
 *   strategy that would like to use Uniswap V3 for swaps. It hold all needed
 *   logic to perform both exact input and exact output swaps.
 *
 *   The global address variables default to the ETH mainnet addresses but
 *   remain settable by the inheriting contract to allow for customization
 *   based on needs or chain its used on.
 *
 *   The only variables that are required to be set are the specific fees
 *   for each token pair. The inheriting contract can use the {_setUniFees}
 *   function to easily set this for any token pairs needed.
 */
contract UniswapV3Swapper is BaseSwapper {
    using SafeERC20 for ERC20;
    // Defaults to WETH on mainnet.
    address public base = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;

    // Defaults to Uniswap V3 router on mainnet.
    address public router = 0xE592427A0AEce92De3Edee1F18E0157C05861564;

    // Fees for the Uni V3 pools. Each fee should get set each way in
    // the mapping so no matter the direction the correct fee will get
    // returned for any two tokens.
    mapping(address => mapping(address => uint24)) public uniFees;

    /**
     * @dev All fess will default to 0 on creation. A strategist will need
     * To set the mapping for the tokens expected to swap. This function
     * is to help set the mapping. It can be called internally during
     * initialization, through permissioned functions etc.
     */
    function _setUniFees(
        address _token0,
        address _token1,
        uint24 _fee
    ) internal virtual {
        uniFees[_token0][_token1] = _fee;
        uniFees[_token1][_token0] = _fee;
    }

    /**
     * @dev Used to swap a specific amount of `_from` to `_to`.
     * This will check and handle all allowances as well as not swapping
     * unless `_amountIn` is greater than the set `_minAmountOut`
     *
     * If one of the tokens matches with the `base` token it will do only
     * one jump, otherwise will do two jumps.
     *
     * The corresponding uniFees for each token pair will need to be set
     * other wise this function will revert.
     *
     * @param _from The token we are swapping from.
     * @param _to The token we are swapping to.
     * @param _amountIn The amount of `_from` we will swap.
     * @param _minAmountOut The min of `_to` to get out.
     * @return _amountOut The actual amount of `_to` that was swapped to
     */
    function _swapFrom(
        address _from,
        address _to,
        uint256 _amountIn,
        uint256 _minAmountOut
    ) internal virtual returns (uint256 _amountOut) {
        if (_amountIn != 0 && _amountIn >= minAmountToSell) {
            _checkAllowance(router, _from, _amountIn);
            if (_from == base || _to == base) {
                ISwapRouter.ExactInputSingleParams memory params = ISwapRouter
                    .ExactInputSingleParams(
                        _from, // tokenIn
                        _to, // tokenOut
                        uniFees[_from][_to], // from-to fee
                        address(this), // recipient
                        block.timestamp, // deadline
                        _amountIn, // amountIn
                        _minAmountOut, // amountOut
                        0 // sqrtPriceLimitX96
                    );

                _amountOut = ISwapRouter(router).exactInputSingle(params);
            } else {
                bytes memory path = abi.encodePacked(
                    _from, // tokenIn
                    uniFees[_from][base], // from-base fee
                    base, // base token
                    uniFees[base][_to], // base-to fee
                    _to // tokenOut
                );

                _amountOut = ISwapRouter(router).exactInput(
                    ISwapRouter.ExactInputParams(
                        path,
                        address(this),
                        block.timestamp,
                        _amountIn,
                        _minAmountOut
                    )
                );
            }
        }
    }

    /**
     * @dev Used to swap a specific amount of `_to` from `_from` unless
     * it takes more than `_maxAmountFrom`.
     *
     * This will check and handle all allowances as well as not swapping
     * unless `_maxAmountFrom` is greater than the set `minAmountToSell`
     *
     * If one of the tokens matches with the `base` token it will do only
     * one jump, otherwise will do two jumps.
     *
     * The corresponding uniFees for each token pair will need to be set
     * other wise this function will revert.
     *
     * @param _from The token we are swapping from.
     * @param _to The token we are swapping to.
     * @param _amountTo The amount of `_to` we need out.
     * @param _maxAmountFrom The max of `_from` we will swap.
     * @return _amountIn The actual amount of `_from` swapped.
     */
    function _swapTo(
        address _from,
        address _to,
        uint256 _amountTo,
        uint256 _maxAmountFrom
    ) internal virtual returns (uint256 _amountIn) {
        if (_maxAmountFrom != 0 && _maxAmountFrom >= minAmountToSell) {
            _checkAllowance(router, _from, _maxAmountFrom);
            if (_from == base || _to == base) {
                ISwapRouter.ExactOutputSingleParams memory params = ISwapRouter
                    .ExactOutputSingleParams(
                        _from, // tokenIn
                        _to, // tokenOut
                        uniFees[_from][_to], // from-to fee
                        address(this), // recipient
                        block.timestamp, // deadline
                        _amountTo, // amountOut
                        _maxAmountFrom, // maxAmountIn
                        0 // sqrtPriceLimitX96
                    );

                _amountIn = ISwapRouter(router).exactOutputSingle(params);
            } else {
                bytes memory path = abi.encodePacked(
                    _to,
                    uniFees[base][_to], // base-to fee
                    base,
                    uniFees[_from][base], // from-base fee
                    _from
                );

                _amountIn = ISwapRouter(router).exactOutput(
                    ISwapRouter.ExactOutputParams(
                        path,
                        address(this),
                        block.timestamp,
                        _amountTo, // How much we want out
                        _maxAmountFrom
                    )
                );
            }
        }
    }

    /**
     * @dev Internal safe function to make sure the contract you want to
     * interact with has enough allowance to pull the desired tokens.
     *
     * @param _contract The address of the contract that will move the token.
     * @param _token The ERC-20 token that will be getting spent.
     * @param _amount The amount of `_token` to be spent.
     */
    function _checkAllowance(
        address _contract,
        address _token,
        uint256 _amount
    ) internal virtual {
        if (ERC20(_token).allowance(address(this), _contract) < _amount) {
            ERC20(_token).forceApprove(_contract, 0);
            ERC20(_token).forceApprove(_contract, _amount);
        }
    }
}
"
    },
    "src/interfaces/IPSM.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.18;

interface IPSM {
    function sellGem(address usr, uint256 gemAmt) external;
    function buyGem(address usr, uint256 gemAmt) external;
    function tin() external view returns (uint256);
    function tout() external view returns (uint256);
}

interface IExchange {
    function daiToUsds(address usr, uint256 wad) external;
    function usdsToDai(address usr, uint256 wad) external;
}
"
    },
    "src/interfaces/IStrategyInterface.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.18;

import {IStrategy} from "@tokenized-strategy/interfaces/IStrategy.sol";

interface IStrategyInterface is IStrategy {
    // DAIToUSDC specific functions
    function maxAcceptableFeeOutPSM() external view returns (uint256);
    function swapSlippageBPS() external view returns (uint256);
    function VAULT() external view returns (address);
    function DEPOSITOR() external view returns (address);
    function setMaxAcceptableFeeOutPSM(
        uint256 _maxAcceptableFeeOutPSM
    ) external;
    function setSwapSlippageBPS(uint256 _swapSlippageBPS) external;
    function emergencyWithdrawDirect(
        uint256 _sharesVault,
        bool _usePSM,
        uint256 _swapAmount
    ) external;
}
"
    },
    "lib/tokenized-strategy/src/BaseStrategy.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";

// TokenizedStrategy interface used for internal view delegateCalls.
import {ITokenizedStrategy} from "./interfaces/ITokenizedStrategy.sol";

/**
 * @title YearnV3 Base Strategy
 * @author yearn.finance
 * @notice
 *  BaseStrategy implements all of the required functionality to
 *  seamlessly integrate with the `TokenizedStrategy` implementation contract
 *  allowing anyone to easily build a fully permissionless ERC-4626 compliant
 *  Vault by inheriting this contract and overriding three simple functions.

 *  It utilizes an immutable proxy pattern that allows the BaseStrategy
 *  to remain simple and small. All standard logic is held within the
 *  `TokenizedStrategy` and is reused over any n strategies all using the
 *  `fallback` function to delegatecall the implementation so that strategists
 *  can only be concerned with writing their strategy specific code.
 *
 *  This contract should be inherited and the three main abstract methods
 *  `_deployFunds`, `_freeFunds` and `_harvestAndReport` implemented to adapt
 *  the Strategy to the particular needs it has to generate yield. There are
 *  other optional methods that can be implemented to further customize
 *  the strategy if desired.
 *
 *  All default storage for the strategy is controlled and updated by the
 *  `TokenizedStrategy`. The implementation holds a storage struct that
 *  contains all needed global variables in a manual storage slot. This
 *  means strategists can feel free to implement their own custom storage
 *  variables as they need with no concern of collisions. All global variables
 *  can be viewed within the Strategy by a simple call using the
 *  `TokenizedStrategy` variable. IE: TokenizedStrategy.globalVariable();.
 */
abstract contract BaseStrategy {
    /*//////////////////////////////////////////////////////////////
                            MODIFIERS
    //////////////////////////////////////////////////////////////*/
    /**
     * @dev Used on TokenizedStrategy callback functions to make sure it is post
     * a delegateCall from this address to the TokenizedStrategy.
     */
    modifier onlySelf() {
        _onlySelf();
        _;
    }

    /**
     * @dev Use to assure that the call is coming from the strategies management.
     */
    modifier onlyManagement() {
        TokenizedStrategy.requireManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the keeper.
     */
    modifier onlyKeepers() {
        TokenizedStrategy.requireKeeperOrManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the emergency admin.
     */
    modifier onlyEmergencyAuthorized() {
        TokenizedStrategy.requireEmergencyAuthorized(msg.sender);
        _;
    }

    /**
     * @dev Require that the msg.sender is this address.
     */
    function _onlySelf() internal view {
        require(msg.sender == address(this), "!self");
    }

    /*//////////////////////////////////////////////////////////////
                            CONSTANTS
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev This is the address of the TokenizedStrategy implementation
     * contract that will be used by all strategies to handle the
     * accounting, logic, storage etc.
     *
     * Any external calls to the that don't hit one of the functions
     * defined in this base or the strategy will end up being forwarded
     * through the fallback function, which will delegateCall this address.
     *
     * This address should be the same for every strategy, never be adjusted
     * and always be checked before any integration with the Strategy.
     */
    address public constant tokenizedStrategyAddress =
        0xD377919FA87120584B21279a491F82D5265A139c;

    /*//////////////////////////////////////////////////////////////
                            IMMUTABLES
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Underlying asset the Strategy is earning yield on.
     * Stored here for cheap retrievals within the strategy.
     */
    ERC20 internal immutable asset;

    /**
     * @dev This variable is set to address(this) during initialization of each strategy.
     *
     * This can be used to retrieve storage data within the strategy
     * contract as if it were a linked library.
     *
     *       i.e. uint256 totalAssets = TokenizedStrategy.totalAssets()
     *
     * Using address(this) will mean any calls using this variable will lead
     * to a call to itself. Which will hit the fallback function and
     * delegateCall that to the actual TokenizedStrategy.
     */
    ITokenizedStrategy internal immutable TokenizedStrategy;

    /**
     * @notice Used to initialize the strategy on deployment.
     *
     * This will set the `TokenizedStrategy` variable for easy
     * internal view calls to the implementation. As well as
     * initializing the default storage variables based on the
     * parameters and using the deployer for the permissioned roles.
     *
     * @param _asset Address of the underlying asset.
     * @param _name Name the strategy will use.
     */
    constructor(address _asset, string memory _name) {
        asset = ERC20(_asset);

        // Set instance of the implementation for internal use.
        TokenizedStrategy = ITokenizedStrategy(address(this));

        // Initialize the strategy's storage variables.
        _delegateCall(
            abi.encodeCall(
                ITokenizedStrategy.initialize,
                (_asset, _name, msg.sender, msg.sender, msg.sender)
            )
        );

        // Store the tokenizedStrategyAddress at the standard implementation
        // address storage slot so etherscan picks up the interface. This gets
        // stored on initialization and never updated.
        assembly {
            sstore(
                // keccak256('eip1967.proxy.implementation' - 1)
                0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc,
                tokenizedStrategyAddress
            )
        }
    }

    /*//////////////////////////////////////////////////////////////
                NEEDED TO BE OVERRIDDEN BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Can deploy up to '_amount' of 'asset' in the yield source.
     *
     * This function is called at the end of a {deposit} or {mint}
     * call. Meaning that unless a whitelist is implemented it will
     * be entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can attempt
     * to deposit in the yield source.
     */
    function _deployFunds(uint256 _amount) internal virtual;

    /**
     * @dev Should attempt to free the '_amount' of 'asset'.
     *
     * NOTE: The amount of 'asset' that is already loose has already
     * been accounted for.
     *
     * This function is called during {withdraw} and {redeem} calls.
     * Meaning that unless a whitelist is implemented it will be
     * entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * Should not rely on asset.balanceOf(address(this)) calls other than
     * for diff accounting purposes.
     *
     * Any difference between `_amount` and what is actually freed will be
     * counted as a loss and passed on to the withdrawer. This means
     * care should be taken in times of illiquidity. It may be better to revert
     * if withdraws are simply illiquid so not to realize incorrect losses.
     *
     * @param _amount, The amount of 'asset' to be freed.
     */
    function _freeFunds(uint256 _amount) internal virtual;

    /**
     * @dev Internal function to harvest all rewards, redeploy any idle
     * funds and return an accurate accounting of all funds currently
     * held by the Strategy.
     *
     * This should do any needed harvesting, rewards selling, accrual,
     * redepositing etc. to get the most accurate view of current assets.
     *
     * NOTE: All applicable assets including loose assets should be
     * accounted for in this function.
     *
     * Care should be taken when relying on oracles or swap values rather
     * than actual amounts as all Strategy profit/loss accounting will
     * be done based on this returned value.
     *
     * This can still be called post a shutdown, a strategist can check
     * `TokenizedStrategy.isShutdown()` to decide if funds should be
     * redeployed or simply realize any profits/losses.
     *
     * @return _totalAssets A trusted and accurate account for the total
     * amount of 'asset' the strategy currently holds including idle funds.
     */
    function _harvestAndReport()
        internal
        virtual
        returns (uint256 _totalAssets);

    /*//////////////////////////////////////////////////////////////
                    OPTIONAL TO OVERRIDE BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Optional function for strategist to override that can
     *  be called in between reports.
     *
     * If '_tend' is used tendTrigger() will also need to be overridden.
     *
     * This call can only be called by a permissioned role so may be
     * through protected relays.
     *
     * This can be used to harvest and compound rewards, deposit idle funds,
     * perform needed position maintenance or anything else that doesn't need
     * a full report for.
     *
     *   EX: A strategy that can not deposit funds without getting
     *       sandwiched can use the tend when a certain threshold
     *       of idle to totalAssets has been reached.
     *
     * This will have no effect on PPS of the strategy till report() is called.
     *
     * @param _totalIdle The current amount of idle funds that are available to deploy.
     */
    function _tend(uint256 _totalIdle) internal virtual {}

    /**
     * @dev Optional trigger to override if tend() will be used by the strategy.
     * This must be implemented if the strategy hopes to invoke _tend().
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     */
    function _tendTrigger() internal view virtual returns (bool) {
        return false;
    }

    /**
     * @notice Returns if tend() should be called by a keeper.
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     * @return . Calldata for the tend call.
     */
    function tendTrigger() external view virtual returns (bool, bytes memory) {
        return (
            // Return the status of the tend trigger.
            _tendTrigger(),
            // And the needed calldata either way.
            abi.encodeWithSelector(ITokenizedStrategy.tend.selector)
        );
    }

    /**
     * @notice Gets the max amount of `asset` that an address can deposit.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any deposit or mints to enforce
     * any limits desired by the strategist. This can be used for either a
     * traditional deposit limit or for implementing a whitelist etc.
     *
     *   EX:
     *      if(isAllowed[_owner]) return super.availableDepositLimit(_owner);
     *
     * This does not need to take into account any conversion rates
     * from shares to assets. But should know that any non max uint256
     * amounts may be converted to shares. So it is recommended to keep
     * custom amounts low enough as not to cause overflow when multiplied
     * by `totalSupply`.
     *
     * @param . The address that is depositing into the strategy.
     * @return . The available amount the `_owner` can deposit in terms of `asset`
     */
    function availableDepositLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @notice Gets the max amount of `asset` that can be withdrawn.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any withdraw or redeem to enforce
     * any limits desired by the strategist. This can be used for illiquid
     * or sandwichable strategies. It should never be lower than `totalIdle`.
     *
     *   EX:
     *       return TokenIzedStrategy.totalIdle();
     *
     * This does not need to take into account the `_owner`'s share balance
     * or conversion rates from shares to assets.
     *
     * @param . The address that is withdrawing from the strategy.
     * @return . The available amount that can be withdrawn in terms of `asset`
     */
    function availableWithdrawLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @dev Optional function for a strategist to override that will
     * allow management to manually withdraw deployed funds from the
     * yield source if a strategy is shutdown.
     *
     * This should attempt to free `_amount`, noting that `_amount` may
     * be more than is currently deployed.
     *
     * NOTE: This will not realize any profits or losses. A separate
     * {report} will be needed in order to record any profit/loss. If
     * a report may need to be called after a shutdown it is important
     * to check if the strategy is shutdown during {_harvestAndReport}
     * so that it does not simply re-deploy all funds that had been freed.
     *
     * EX:
     *   if(freeAsset > 0 && !TokenizedStrategy.isShutdown()) {
     *       depositFunds...
     *    }
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function _emergencyWithdraw(uint256 _amount) internal virtual {}

    /*//////////////////////////////////////////////////////////////
                        TokenizedStrategy HOOKS
    //////////////////////////////////////////////////////////////*/

    /**
     * @notice Can deploy up to '_amount' of 'asset' in yield source.
     * @dev Callback for the TokenizedStrategy to call during a {deposit}
     * or {mint} to tell the strategy it can deploy funds.
     *
     * Since this can only be called after a {deposit} or {mint}
     * delegateCall to the TokenizedStrategy msg.sender == address(this).
     *
     * Unless a whitelist is implemented this will be entirely permissionless
     * and thus can be sandwiched or otherwise manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can
     * attempt to deposit in the yield source.
     */
    function deployFunds(uint256 _amount) external virtual onlySelf {
        _deployFunds(_amount);
    }

    /**
     * @notice Should attempt to free the '_amount' of 'asset'.
     * @dev Callback for the TokenizedStrategy to call during a withdraw
     * or redeem to free the needed funds to service the withdraw.
     *
     * This can only be called after a 'withdraw' or 'redeem' delegateCall
     * to the TokenizedStrategy so msg.sender == address(this).
     *
     * @param _amount The amount of 'asset' that the strategy should attempt to free up.
     */
    function freeFunds(uint256 _amount) external virtual onlySelf {
        _freeFunds(_amount);
    }

    /**
     * @notice Returns the accurate amount of all funds currently
     * held by the Strategy.
     * @dev Callback for the TokenizedStrategy to call during a report to
     * get an accurate accounting of assets the strategy controls.
     *
     * This can only be called after a report() delegateCall to the
     * TokenizedStrategy so msg.sender == address(this).
     *
     * @return . A trusted and accurate account for the total amount
     * of 'asset' the strategy currently holds including idle funds.
     */
    function harvestAndReport() external virtual onlySelf returns (uint256) {
        return _harvestAndReport();
    }

    /**
     * @notice Will call the internal '_tend' when a keeper tends the strategy.
     * @dev Callback for the TokenizedStrategy to initiate a _tend call in the strategy.
     *
     * This can only be called after a tend() delegateCall to the TokenizedStrategy
     * so msg.sender == address(this).
     *
     * We name the function `tendThis` so that `tend` calls are forwarded to
     * the TokenizedStrategy.

     * @param _totalIdle The amount of current idle funds that can be
     * deployed during the tend
     */
    function tendThis(uint256 _totalIdle) external virtual onlySelf {
        _tend(_totalIdle);
    }

    /**
     * @notice Will call the internal '_emergencyWithdraw' function.
     * @dev Callback for the TokenizedStrategy during an emergency withdraw.
     *
     * This can only be called after a emergencyWithdraw() delegateCall to
     * the TokenizedStrategy so msg.sender == address(this).
     *
     * We name the function `shutdownWithdraw` so that `emergencyWithdraw`
     * calls are forwarded to the TokenizedStrategy.
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function shutdownWithdraw(uint256 _amount) external virtual onlySelf {
        _emergencyWithdraw(_amount);
    }

    /**
     * @dev Function used to delegate call the TokenizedStrategy with
     * certain `_calldata` and return any return values.
     *
     * This is used to setup the initial storage of the strategy, and
     * can be used by strategist to forward any other call to the
     * TokenizedStrategy implementation.
     *
     * @param _calldata The abi encoded calldata to use in delegatecall.
     * @return . The return value if the call was successful in bytes.
     */
    function _delegateCall(
        bytes memory _calldata
    ) internal returns (bytes memory) {
        // Delegate call the tokenized strategy with provided calldata.
        (bool success, bytes memory result) = tokenizedStrategyAddress
            .delegatecall(_calldata);

        // If the call reverted. Return the error.
        if (!success) {
            assembly {
                let ptr := mload(0x40)
                let size := returndatasize()
                returndatacopy(ptr, 0, size)
                revert(ptr, size)
            }
        }

        // Return the result.
        return result;
    }

    /**
     * @dev Execute a function on the TokenizedStrategy and return any value.
     *
     * This fallback function will be executed when any of the standard functions
     * defined in the TokenizedStrategy are called since they wont be defined in
     * this contract.
     *
     * It will delegatecall the TokenizedStrategy implementation with the exact
     * calldata and return any relevant values.
     *
     */
    fallback() external {
        // load our target address
        address _tokenizedStrategyAddress = tokenizedStrategyAddress;
        // Execute external function using delegatecall and return any value.
        assembly {
            // Copy function selector and any arguments.
            calldatacopy(0, 0, calldatasize())
            // Execute function delegatecall.
            let result := delegatecall(
                gas(),
                _tokenizedStrategyAddress,
                0,
                calldatasize(),
                0,
                0
            )
            // Get any return value
            returndatacopy(0, 0, returndatasize())
            // Return any return value or error back to the caller
            switch result
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);