MorphoAdapter

{{
  "language": "Solidity",
  "sources": {
    "src/strategies/MorphoAdapter.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import "./BaseAdapter.sol";
import {IERC20} from "lib/forge-std/src/interfaces/IERC20.sol";
import {IERC20 as IERC20OZ} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC4626} from "lib/forge-std/src/interfaces/IERC4626.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

/**
 * @title MorphoAdapter
 * @notice Adapter for Morpho Blue integration via MetaMorpho USDC vault
 * @dev Uses Steakhouse USDC MetaMorpho vault (ERC-4626 compliant) for simplified integration
 */
contract MorphoAdapter is BaseAdapter {
    using SafeERC20 for IERC20OZ;
    IERC20OZ public constant USDC = IERC20OZ(0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48);
    IERC4626 public constant MORPHO_VAULT = IERC4626(0xBEEF01735c132Ada46AA9aA4c54623cAA92A64CB);
    
    uint256 private constant BASIS_POINTS = 10000;
    uint256 private constant SECONDS_PER_YEAR = 365 days;
    
    constructor() {
        // Approve vault to spend USDC
        USDC.forceApprove(address(MORPHO_VAULT), type(uint256).max);

        // Initialize metrics tracking
        _initializeMetrics();
    }
    
    function deposit(uint256 amount) external override updateMetricsModifier returns (uint256 sharesOut) {
        require(amount > 0, "MorphoAdapter: amount must be > 0");
        
        // Transfer USDC from sender
        USDC.safeTransferFrom(msg.sender, address(this), amount);
        
        // Get total value before deposit
        uint256 totalValueBefore = MORPHO_VAULT.maxWithdraw(address(this));
        
        // Deposit to MetaMorpho vault
        uint256 vaultShares = MORPHO_VAULT.deposit(amount, address(this));
        require(vaultShares > 0, "MorphoAdapter: vault deposit failed");
        
        // Calculate adapter shares to mint
        if (totalShares == 0) {
            sharesOut = amount; // First depositor 1:1
        } else {
            require(totalValueBefore > 0, "MorphoAdapter: strategy value zero; deposits paused");
            sharesOut = (amount * totalShares) / totalValueBefore;
            require(sharesOut > 0, "MorphoAdapter: deposit too small");
        }
        
        // Update state
        shares[msg.sender] += sharesOut;
        totalShares += sharesOut;
        
        return sharesOut;
    }
    
    function withdraw(uint256 amount) external override returns (uint256 withdrawn) {
        require(amount > 0, "MorphoAdapter: amount must be > 0");
        
        // Get total value in vault
        uint256 totalValue = MORPHO_VAULT.maxWithdraw(address(this));
        require(totalValue >= amount, "MorphoAdapter: insufficient vault balance");
        
        // Calculate shares to burn
        uint256 sharesToBurn = (amount * totalShares) / totalValue;
        require(shares[msg.sender] >= sharesToBurn, "MorphoAdapter: insufficient shares");
        
        // Update state BEFORE withdrawal
        shares[msg.sender] -= sharesToBurn;
        totalShares -= sharesToBurn;
        
        // Withdraw from MetaMorpho vault (returns shares burned, not assets)
        MORPHO_VAULT.withdraw(amount, msg.sender, address(this));
        
        return amount;
    }
    
    function balanceOf(address account) external view override returns (uint256) {
        if (totalShares == 0) return 0;
        
        // Get total withdrawable amount from vault
        uint256 totalValue = MORPHO_VAULT.maxWithdraw(address(this));
        return (shares[account] * totalValue) / totalShares;
    }
    
    // Override getCurrentAPY to use tracked APY from BaseAdapter
    // The base implementation already handles stale APY by returning 0
    
    /**
     * @dev Implementation of abstract function from BaseAdapter
     * @return Current share price scaled by 1e18
     */
    function _getCurrentSharePrice() internal view override returns (uint256) {
        if (totalShares == 0) return 1e18;
        
        // Get total withdrawable value from the vault
        uint256 totalValue = MORPHO_VAULT.maxWithdraw(address(this));
        
        // Return share price scaled by 1e18
        return (totalValue * 1e18) / totalShares;
    }
}"
    },
    "src/strategies/BaseAdapter.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import "../interfaces/IStrategyAdapter.sol";

/**
 * @title BaseAdapter
 * @notice Abstract base contract for strategy adapters with APY tracking
 * @dev All strategy adapters should inherit from this contract
 */
abstract contract BaseAdapter is IStrategyAdapter {
    // APY tracking state
    uint256 internal lastSharePrice;
    uint256 internal lastUpdateTime;
    uint256 internal calculatedAPY;
    uint256 internal constant APY_PRECISION = 10000; // 100.00%
    uint256 internal constant MIN_UPDATE_INTERVAL = 1 hours;
    uint256 internal constant STALE_APY_THRESHOLD = 24 hours;
    
    // Share tracking
    mapping(address => uint256) internal shares;
    uint256 internal totalShares;
    
    // Events
    event MetricsUpdated(address indexed updater, uint256 newAPY, uint256 sharePrice);
    
    /**
     * @dev Must be implemented by each adapter to return current share price
     * @return Current price of 1 share in underlying assets (scaled by 1e18)
     */
    function _getCurrentSharePrice() internal view virtual returns (uint256);
    
    /**
     * @notice Update APY metrics based on share price changes
     * @dev Can be called by anyone after MIN_UPDATE_INTERVAL has passed
     */
    function updateMetrics() external virtual override {
        require(block.timestamp >= lastUpdateTime + MIN_UPDATE_INTERVAL, "BaseAdapter: Too soon to update");
        
        uint256 currentSharePrice = _getCurrentSharePrice();
        
        if (lastUpdateTime > 0 && lastSharePrice > 0 && currentSharePrice > lastSharePrice) {
            // Calculate time-weighted APY
            uint256 timeElapsed = block.timestamp - lastUpdateTime;
            
            // Calculate price change with precision
            // Formula: ((currentPrice - lastPrice) / lastPrice) * APY_PRECISION
            uint256 priceChangeRatio = ((currentSharePrice - lastSharePrice) * APY_PRECISION * 1e18) / lastSharePrice;
            
            // Annualize the return
            // Formula: (priceChangeRatio * SECONDS_PER_YEAR) / (timeElapsed * 1e18)
            calculatedAPY = (priceChangeRatio * 365 days) / (timeElapsed * 1e18);
        }
        
        lastSharePrice = currentSharePrice;
        lastUpdateTime = block.timestamp;
        
        emit MetricsUpdated(msg.sender, calculatedAPY, currentSharePrice);
    }
    
    /**
     * @notice Get the current APY
     * @dev Returns 0 if APY is stale (not updated in 24 hours)
     * @return Current APY in basis points
     */
    function getCurrentAPY() external view virtual override returns (uint256) {
        if (isAPYStale()) {
            return 0; // Return 0 for stale APY
        }
        return calculatedAPY;
    }
    
    /**
     * @notice Get the last time metrics were updated
     * @return Timestamp of last update
     */
    function getLastUpdateTime() external view override returns (uint256) {
        return lastUpdateTime;
    }
    
    /**
     * @notice Check if APY data is stale
     * @return True if last update was more than 24 hours ago
     */
    function isAPYStale() public view override returns (bool) {
        return block.timestamp > lastUpdateTime + STALE_APY_THRESHOLD;
    }
    
    /**
     * @dev Initialize metrics on deployment
     * Should be called in the constructor of inheriting contracts
     */
    function _initializeMetrics() internal {
        uint256 initialPrice = _getCurrentSharePrice();
        if (initialPrice > 0) {
            lastSharePrice = initialPrice;
            lastUpdateTime = block.timestamp;
        }
        calculatedAPY = 0; // Will be set on first update
    }
    
    /**
     * @notice Get shares held by an account
     * @param account Address to check
     * @return Number of shares
     */
    function sharesOf(address account) external view returns (uint256) {
        return shares[account];
    }
    
    /**
     * @notice Get total shares minted
     * @return Total number of shares
     */
    function getTotalShares() external view returns (uint256) {
        return totalShares;
    }
    
    /**
     * @notice Get current share price
     * @return Price of 1 share in underlying assets (scaled by 1e18)
     */
    function sharePrice() external view returns (uint256) {
        return _getCurrentSharePrice();
    }
    
    /**
     * @dev Modifier to update metrics if needed before user interactions
     */
    modifier updateMetricsModifier() {
        if (block.timestamp >= lastUpdateTime + MIN_UPDATE_INTERVAL) {
            uint256 currentSharePrice = _getCurrentSharePrice();
            
            if (lastUpdateTime > 0 && lastSharePrice > 0 && currentSharePrice > lastSharePrice) {
                uint256 timeElapsed = block.timestamp - lastUpdateTime;
                uint256 priceChangeRatio = ((currentSharePrice - lastSharePrice) * APY_PRECISION * 1e18) / lastSharePrice;
                calculatedAPY = (priceChangeRatio * 365 days) / (timeElapsed * 1e18);
            }
            
            lastSharePrice = currentSharePrice;
            lastUpdateTime = block.timestamp;
            
            emit MetricsUpdated(msg.sender, calculatedAPY, currentSharePrice);
        }
        _;
    }
}"
    },
    "lib/forge-std/src/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2;

/// @dev Interface of the ERC20 standard as defined in the EIP.
/// @dev This includes the optional name, symbol, and decimals metadata.
interface IERC20 {
    /// @dev Emitted when `value` tokens are moved from one account (`from`) to another (`to`).
    event Transfer(address indexed from, address indexed to, uint256 value);

    /// @dev Emitted when the allowance of a `spender` for an `owner` is set, where `value`
    /// is the new allowance.
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /// @notice Returns the amount of tokens in existence.
    function totalSupply() external view returns (uint256);

    /// @notice Returns the amount of tokens owned by `account`.
    function balanceOf(address account) external view returns (uint256);

    /// @notice Moves `amount` tokens from the caller's account to `to`.
    function transfer(address to, uint256 amount) external returns (bool);

    /// @notice Returns the remaining number of tokens that `spender` is allowed
    /// to spend on behalf of `owner`
    function allowance(address owner, address spender) external view returns (uint256);

    /// @notice Sets `amount` as the allowance of `spender` over the caller's tokens.
    /// @dev Be aware of front-running risks: https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
    function approve(address spender, uint256 amount) external returns (bool);

    /// @notice Moves `amount` tokens from `from` to `to` using the allowance mechanism.
    /// `amount` is then deducted from the caller's allowance.
    function transferFrom(address from, address to, uint256 amount) external returns (bool);

    /// @notice Returns the name of the token.
    function name() external view returns (string memory);

    /// @notice Returns the symbol of the token.
    function symbol() external view returns (string memory);

    /// @notice Returns the decimals places of the token.
    function decimals() external view returns (uint8);
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
    },
    "lib/forge-std/src/interfaces/IERC4626.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";

/// @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
/// https://eips.ethereum.org/EIPS/eip-4626
interface IERC4626 is IERC20 {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender, address indexed receiver, address indexed owner, uint256 assets, uint256 shares
    );

    /// @notice Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
    /// @dev
    /// - MUST be an ERC-20 token contract.
    /// - MUST NOT revert.
    function asset() external view returns (address assetTokenAddress);

    /// @notice Returns the total amount of the underlying asset that is “managed” by Vault.
    /// @dev
    /// - SHOULD include any compounding that occurs from yield.
    /// - MUST be inclusive of any fees that are charged against assets in the Vault.
    /// - MUST NOT revert.
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /// @notice Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
    /// scenario where all the conditions are met.
    /// @dev
    /// - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
    /// - MUST NOT show any variations depending on the caller.
    /// - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
    /// - MUST NOT revert.
    ///
    /// NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
    /// “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
    /// from.
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /// @notice Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
    /// scenario where all the conditions are met.
    /// @dev
    /// - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
    /// - MUST NOT show any variations depending on the caller.
    /// - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
    /// - MUST NOT revert.
    ///
    /// NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
    /// “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
    /// from.
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /// @notice Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
    /// through a deposit call.
    /// @dev
    /// - MUST return a limited value if receiver is subject to some deposit limit.
    /// - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
    /// - MUST NOT revert.
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /// @notice Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
    /// current on-chain conditions.
    /// @dev
    /// - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
    ///   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
    ///   in the same transaction.
    /// - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
    ///   deposit would be accepted, regardless if the user has enough tokens approved, etc.
    /// - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
    /// - MUST NOT revert.
    ///
    /// NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
    /// share price or some other type of condition, meaning the depositor will lose assets by depositing.
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /// @notice Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
    /// @dev
    /// - MUST emit the Deposit event.
    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
    ///   deposit execution, and are accounted for during deposit.
    /// - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
    ///   approving enough underlying tokens to the Vault contract, etc).
    ///
    /// NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /// @notice Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
    /// @dev
    /// - MUST return a limited value if receiver is subject to some mint limit.
    /// - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
    /// - MUST NOT revert.
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /// @notice Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
    /// current on-chain conditions.
    /// @dev
    /// - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
    ///   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
    ///   same transaction.
    /// - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
    ///   would be accepted, regardless if the user has enough tokens approved, etc.
    /// - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
    /// - MUST NOT revert.
    ///
    /// NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
    /// share price or some other type of condition, meaning the depositor will lose assets by minting.
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /// @notice Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
    /// @dev
    /// - MUST emit the Deposit event.
    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
    ///   execution, and are accounted for during mint.
    /// - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
    ///   approving enough underlying tokens to the Vault contract, etc).
    ///
    /// NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /// @notice Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
    /// Vault, through a withdrawal call.
    /// @dev
    /// - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
    /// - MUST NOT revert.
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /// @notice Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
    /// given current on-chain conditions.
    /// @dev
    /// - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
    ///   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
    ///   called
    ///   in the same transaction.
    /// - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
    ///   the withdrawal would be accepted, regardless if the user has enough shares, etc.
    /// - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
    /// - MUST NOT revert.
    ///
    /// NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
    /// share price or some other type of condition, meaning the depositor will lose assets by depositing.
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /// @notice Burns shares from owner and sends exactly assets of underlying tokens to receiver.
    /// @dev
    /// - MUST emit the Withdraw event.
    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
    ///   withdraw execution, and are accounted for during withdrawal.
    /// - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
    ///   not having enough shares, etc).
    ///
    /// Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
    /// Those methods should be performed separately.
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /// @notice Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
    /// through a redeem call.
    /// @dev
    /// - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
    /// - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
    /// - MUST NOT revert.
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /// @notice Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
    /// given current on-chain conditions.
    /// @dev
    /// - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
    ///   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
    ///   same transaction.
    /// - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
    ///   redemption would be accepted, regardless if the user has enough shares, etc.
    /// - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
    /// - MUST NOT revert.
    ///
    /// NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
    /// share price or some other type of condition, meaning the depositor will lose assets by redeeming.
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /// @notice Burns exactly shares from owner and sends assets of underlying tokens to receiver.
    /// @dev
    /// - MUST emit the Withdraw event.
    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
    ///   redeem execution, and are accounted for during redeem.
    /// - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
    ///   not having enough shares, etc).
    ///
    /// NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
    /// Those methods should be performed separately.
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}
"
    },
    "src/interfaces/IStrategyAdapter.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

interface IStrategyAdapter {
    function deposit(uint256 amount) external returns (uint256 shares);
    
    function withdraw(uint256 amount) external returns (uint256 withdrawn);
    
    function balanceOf(address account) external view returns (uint256);
    
    function getCurrentAPY() external view returns (uint256);
    
    // APY tracking functions
    function updateMetrics() external;
    
    function getLastUpdateTime() external view returns (uint256);
    
    function isAPYStale() external view returns (bool);
}"
    },
    "lib/openzeppelin-contracts/contracts/interfaces/IERC1363.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)

pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}
"
    },
    "lib/openzeppelin-contracts/contracts/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)

pragma solidity >=0.4.16;

import {IERC20} from "../token/ERC20/IERC20.sol";
"
    },
    "lib/openzeppelin-contracts/contracts/interfaces/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)

pragma solidity >=0.4.16;

import {IERC165} from "../utils/introspection/IERC165.sol";
"
    },
    "lib/openzeppelin-contracts/contracts/utils/introspection/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
"
    }
  },
  "settings": {
    "remappings": [
      "forge-std/=lib/forge-std/src/",
      "@openzeppelin/=lib/openzeppelin-contracts/",
      "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
      "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
      "halmos-cheatcodes/=lib/openzeppelin-contracts/lib/halmos-cheatcodes/src/",
      "openzeppelin-contracts/=lib/openzeppelin-contracts/"
    ],
    "optimizer": {
      "enabled": true,
      "runs": 400
    },
    "metadata": {
      "useLiteralContent": false,
      "bytecodeHash": "ipfs",
      "appendCBOR": true
    },
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    },
    "evmVersion": "cancun",
    "viaIR": true
  }
}}