INCOME

// Sources flattened with hardhat v2.26.3 https://hardhat.org

// SPDX-License-Identifier: MIT

// File @openzeppelin/contracts/utils/Context.sol@v4.9.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.9.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.9.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}


// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol@v4.9.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v4.9.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}


// File @openzeppelin/contracts/utils/math/SafeMath.sol@v4.9.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}


// File contracts/ERC20ActualBurn.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity ^0.8.6;
/**
 * @title ERC20ActualBurn
 * @dev ERC20 token with actual burn functionality - tokens are permanently removed from circulation
 */
abstract contract ERC20ActualBurn is ERC20 {
    using SafeMath for uint256;

    // Must be called with empty constructor since we use initialize pattern
    constructor() ERC20("", "") {}

    function _initERC20ActualBurn(
        string memory name_,
        string memory symbol_
    ) internal {
        // Note: ERC20 stores name and symbol internally
        // This pattern works with the initialize function
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the total supply.
     * Emits a {Transfer} event with `to` set to the zero address.
     * Requirements:
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual override {
        require(account != address(0), "ERC20: burn from the zero address");

        uint256 accountBalance = balanceOf(account);
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");

        super._burn(account, amount);
    }

    /**
     * @dev Creates `amount` tokens and assigns them to `account`, increasing the total supply.
     * Emits a {Transfer} event with `from` set to the zero address.
     * Requirements:
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual override {
        require(account != address(0), "ERC20: mint to the zero address");
        super._mint(account, amount);
    }
}


// File contracts/INCOMEDividendTracker.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity ^0.8.6;
library SafeMathInt {
    int256 private constant MIN_INT256 = int256(1) << 255;
    int256 private constant MAX_INT256 = ~(int256(1) << 255);

    function mul(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a * b;
        require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
        require((b == 0) || (c / b == a));
        return c;
    }

    function div(int256 a, int256 b) internal pure returns (int256) {
        require(b != -1 || a != MIN_INT256);
        return a / b;
    }

    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        require((b >= 0 && c <= a) || (b < 0 && c > a));
        return c;
    }

    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        require((b >= 0 && c >= a) || (b < 0 && c < a));
        return c;
    }

    function abs(int256 a) internal pure returns (int256) {
        require(a != MIN_INT256);
        return a < 0 ? -a : a;
    }

    function toUint256Safe(int256 a) internal pure returns (uint256) {
        require(a >= 0);
        return uint256(a);
    }
}

library SafeMathUint {
    function toInt256Safe(uint256 a) internal pure returns (int256) {
        int256 b = int256(a);
        require(b >= 0);
        return b;
    }
}

library IterableMapping {
    struct Map {
        address[] keys;
        mapping(address => uint256) values;
        mapping(address => uint256) indexOf;
        mapping(address => bool) inserted;
    }

    function get(Map storage map, address key) internal view returns (uint256) {
        return map.values[key];
    }

    function getIndexOfKey(Map storage map, address key)
        internal
        view
        returns (int256)
    {
        if (!map.inserted[key]) {
            return -1;
        }
        return int256(map.indexOf[key]);
    }

    function getKeyAtIndex(Map storage map, uint256 index)
        internal
        view
        returns (address)
    {
        return map.keys[index];
    }

    function size(Map storage map) internal view returns (uint256) {
        return map.keys.length;
    }

    function set(
        Map storage map,
        address key,
        uint256 val
    ) internal {
        if (map.inserted[key]) {
            map.values[key] = val;
        } else {
            map.inserted[key] = true;
            map.values[key] = val;
            map.indexOf[key] = map.keys.length;
            map.keys.push(key);
        }
    }

    function remove(Map storage map, address key) internal {
        if (!map.inserted[key]) {
            return;
        }

        delete map.inserted[key];
        delete map.values[key];

        uint256 index = map.indexOf[key];
        uint256 lastIndex = map.keys.length - 1;
        address lastKey = map.keys[lastIndex];

        map.indexOf[lastKey] = index;
        delete map.indexOf[key];

        map.keys[index] = lastKey;
        map.keys.pop();
    }
}

/// @title Dividend-Paying Token Interface
interface DividendPayingTokenInterface {
    function dividendOf(address _owner) external view returns (uint256);
    function withdrawDividend() external;

    event DividendsDistributed(address indexed from, uint256 weiAmount);
    event DividendWithdrawn(address indexed to, uint256 weiAmount);
}

/// @title Dividend-Paying Token Optional Interface
interface DividendPayingTokenOptionalInterface {
    function withdrawableDividendOf(address _owner)
        external
        view
        returns (uint256);
    function withdrawnDividendOf(address _owner)
        external
        view
        returns (uint256);
    function accumulativeDividendOf(address _owner)
        external
        view
        returns (uint256);
}

/**
 * @title DividendPayingToken
 * @dev A token that distributes ETH/BNB dividends to its holders
 */
contract DividendPayingToken is
    ERC20,
    DividendPayingTokenInterface,
    DividendPayingTokenOptionalInterface
{
    using SafeMath for uint256;
    using SafeMathUint for uint256;
    using SafeMathInt for int256;

    uint256 internal constant magnitude = 2**128;
    uint256 internal magnifiedDividendPerShare;
    mapping(address => int256) internal magnifiedDividendCorrections;
    mapping(address => uint256) internal withdrawnDividends;
    uint256 public totalDividendsDistributed;

    constructor(string memory _name, string memory _symbol)
        ERC20(_name, _symbol)
    {}

    receive() external payable {
        distributeDividends();
    }

    function distributeDividends() public payable {
        require(totalSupply() > 0, "No supply");

        if (msg.value > 0) {
            magnifiedDividendPerShare = magnifiedDividendPerShare.add(
                (msg.value).mul(magnitude) / totalSupply()
            );
            emit DividendsDistributed(msg.sender, msg.value);
            totalDividendsDistributed = totalDividendsDistributed.add(
                msg.value
            );
        }
    }

    function withdrawDividend() public virtual override {
        _withdrawDividendOfUser(payable(msg.sender));
    }

    function _withdrawDividendOfUser(address payable user)
        internal
        returns (uint256)
    {
        uint256 _withdrawableDividend = withdrawableDividendOf(user);
        if (_withdrawableDividend > 0) {
            withdrawnDividends[user] = withdrawnDividends[user].add(
                _withdrawableDividend
            );
            emit DividendWithdrawn(user, _withdrawableDividend);
            (bool success, ) = user.call{value: _withdrawableDividend}("");

            if (!success) {
                withdrawnDividends[user] = withdrawnDividends[user].sub(
                    _withdrawableDividend
                );
                return 0;
            }

            return _withdrawableDividend;
        }

        return 0;
    }

    function dividendOf(address _owner) public view override returns (uint256) {
        return withdrawableDividendOf(_owner);
    }

    function withdrawableDividendOf(address _owner)
        public
        view
        override
        returns (uint256)
    {
        return accumulativeDividendOf(_owner).sub(withdrawnDividends[_owner]);
    }

    function withdrawnDividendOf(address _owner)
        public
        view
        override
        returns (uint256)
    {
        return withdrawnDividends[_owner];
    }

    function accumulativeDividendOf(address _owner)
        public
        view
        override
        returns (uint256)
    {
        return
            magnifiedDividendPerShare
                .mul(balanceOf(_owner))
                .toInt256Safe()
                .add(magnifiedDividendCorrections[_owner])
                .toUint256Safe() / magnitude;
    }

    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual override {
        require(false, "No transfers allowed");

        int256 _magCorrection = magnifiedDividendPerShare
            .mul(value)
            .toInt256Safe();
        magnifiedDividendCorrections[from] = magnifiedDividendCorrections[from]
            .add(_magCorrection);
        magnifiedDividendCorrections[to] = magnifiedDividendCorrections[to].sub(
            _magCorrection
        );
    }

    function _mint(address account, uint256 value) internal override {
        super._mint(account, value);

        magnifiedDividendCorrections[account] = magnifiedDividendCorrections[
            account
        ].sub((magnifiedDividendPerShare.mul(value)).toInt256Safe());
    }

    function _burn(address account, uint256 value) internal override {
        super._burn(account, value);

        magnifiedDividendCorrections[account] = magnifiedDividendCorrections[
            account
        ].add((magnifiedDividendPerShare.mul(value)).toInt256Safe());
    }

    function _setBalance(address account, uint256 newBalance) internal {
        uint256 currentBalance = balanceOf(account);

        if (newBalance > currentBalance) {
            uint256 mintAmount = newBalance.sub(currentBalance);
            _mint(account, mintAmount);
        } else if (newBalance < currentBalance) {
            uint256 burnAmount = currentBalance.sub(newBalance);
            _burn(account, burnAmount);
        }
    }
}

/**
 * @title INCOMEDividendTracker
 * @dev Tracks and distributes dividends to INCOME token holders
 */
contract INCOMEDividendTracker is Ownable, DividendPayingToken {
    using SafeMath for uint256;
    using SafeMathInt for int256;
    using IterableMapping for IterableMapping.Map;

    IterableMapping.Map private tokenHoldersMap;
    uint256 public lastProcessedIndex;

    mapping(address => bool) public excludedFromDividends;
    mapping(address => uint256) public lastClaimTimes;

    uint256 public claimWait;
    uint256 public minimumTokenBalanceForDividends;

    event ExcludeFromDividends(address indexed account);
    event ClaimWaitUpdated(uint256 indexed newValue, uint256 indexed oldValue);
    event Claim(
        address indexed account,
        uint256 amount,
        bool indexed automatic
    );

    constructor()
        DividendPayingToken("INCOME_Dividen_Tracker", "INCOME_Dividend_Tracker")
    {
        claimWait = 3600;
        minimumTokenBalanceForDividends = 1 * (10**18);
    }

    function _transfer(
        address,
        address,
        uint256
    ) internal pure override {
        require(false, "INCOME_Dividend_Tracker: No transfers allowed");
    }

    function withdrawDividend() public pure override {
        require(
            false,
            "INCOME_Dividend_Tracker: withdrawDividend disabled. Use the 'claim' function on the main INCOME contract."
        );
    }

    function excludeFromDividends(address account) external onlyOwner {
        require(!excludedFromDividends[account]);
        excludedFromDividends[account] = true;

        _setBalance(account, 0);
        tokenHoldersMap.remove(account);

        emit ExcludeFromDividends(account);
    }

    function _minimumTokenBalanceForReward(uint256 amount) external onlyOwner {
        minimumTokenBalanceForDividends = amount * (10**18);
    }

    function updateClaimWait(uint256 newClaimWait) external onlyOwner {
        require(
            newClaimWait >= 3600 && newClaimWait <= 86400,
            "INCOME_Dividend_Tracker: claimWait must be updated to between 1 and 24 hours"
        );
        require(
            newClaimWait != claimWait,
            "INCOME_Dividend_Tracker: Cannot update claimWait to same value"
        );
        emit ClaimWaitUpdated(newClaimWait, claimWait);
        claimWait = newClaimWait;
    }

    function getLastProcessedIndex() external view returns (uint256) {
        return lastProcessedIndex;
    }

    function getNumberOfTokenHolders() external view returns (uint256) {
        return tokenHoldersMap.keys.length;
    }

    function getAccount(address _account)
        public
        view
        returns (
            address account,
            int256 index,
            int256 iterationsUntilProcessed,
            uint256 withdrawableDividends,
            uint256 totalDividends,
            uint256 lastClaimTime,
            uint256 nextClaimTime,
            uint256 secondsUntilAutoClaimAvailable
        )
    {
        account = _account;

        index = tokenHoldersMap.getIndexOfKey(account);

        iterationsUntilProcessed = -1;

        if (index >= 0) {
            if (uint256(index) > lastProcessedIndex) {
                iterationsUntilProcessed = index.sub(
                    int256(lastProcessedIndex)
                );
            } else {
                uint256 processesUntilEndOfArray = tokenHoldersMap.keys.length >
                    lastProcessedIndex
                    ? tokenHoldersMap.keys.length.sub(lastProcessedIndex)
                    : 0;

                iterationsUntilProcessed = index.add(
                    int256(processesUntilEndOfArray)
                );
            }
        }

        withdrawableDividends = withdrawableDividendOf(account);
        totalDividends = accumulativeDividendOf(account);

        lastClaimTime = lastClaimTimes[account];

        nextClaimTime = lastClaimTime > 0 ? lastClaimTime.add(claimWait) : 0;

        secondsUntilAutoClaimAvailable = nextClaimTime > block.timestamp
            ? nextClaimTime.sub(block.timestamp)
            : 0;
    }

    function getAccountAtIndex(uint256 index)
        public
        view
        returns (
            address,
            int256,
            int256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        if (index >= tokenHoldersMap.size()) {
            return (address(0), -1, -1, 0, 0, 0, 0, 0);
        }

        address account = tokenHoldersMap.getKeyAtIndex(index);

        return getAccount(account);
    }

    function canAutoClaim(uint256 lastClaimTime) private view returns (bool) {
        if (lastClaimTime > block.timestamp) {
            return false;
        }

        return block.timestamp.sub(lastClaimTime) >= claimWait;
    }

    function setBalance(address payable account, uint256 newBalance)
        external
        onlyOwner
    {
        if (excludedFromDividends[account]) {
            return;
        }

        if (newBalance >= minimumTokenBalanceForDividends) {
            _setBalance(account, newBalance);
            tokenHoldersMap.set(account, newBalance);
        } else {
            _setBalance(account, 0);
            tokenHoldersMap.remove(account);
        }

        processAccount(account, true);
    }

    function process(uint256 gas)
        public
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        uint256 numberOfTokenHolders = tokenHoldersMap.keys.length;

        if (numberOfTokenHolders == 0) {
            return (0, 0, lastProcessedIndex);
        }

        uint256 _lastProcessedIndex = lastProcessedIndex;

        uint256 gasUsed = 0;

        uint256 gasLeft = gasleft();

        uint256 iterations = 0;
        uint256 claims = 0;

        while (gasUsed < gas && iterations < numberOfTokenHolders) {
            _lastProcessedIndex++;

            if (_lastProcessedIndex >= tokenHoldersMap.keys.length) {
                _lastProcessedIndex = 0;
            }

            address account = tokenHoldersMap.keys[_lastProcessedIndex];

            if (canAutoClaim(lastClaimTimes[account])) {
                if (processAccount(payable(account), true)) {
                    claims++;
                }
            }

            iterations++;

            uint256 newGasLeft = gasleft();

            if (gasLeft > newGasLeft) {
                gasUsed = gasUsed.add(gasLeft.sub(newGasLeft));
            }

            gasLeft = newGasLeft;
        }

        lastProcessedIndex = _lastProcessedIndex;

        return (iterations, claims, lastProcessedIndex);
    }

    function processAccount(address payable account, bool automatic)
        public
        onlyOwner
        returns (bool)
    {
        uint256 amount = _withdrawDividendOfUser(account);

        if (amount > 0) {
            lastClaimTimes[account] = block.timestamp;
            emit Claim(account, amount, automatic);
            return true;
        }

        return false;
    }
}


// File contracts/IncomeTokenV1_1.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity ^0.8.6;
/**

    ____                                   ____     __                __   ______      _     
   /  _/___  _________  ____ ___  ___     /  _/____/ /___ _____  ____/ /  / ____/___  (_)___ 
   / // __ \/ ___/ __ \/ __ `__ \/ _ \    / // ___/ / __ `/ __ \/ __  /  / /   / __ \/ / __ \
 _/ // / / / /__/ /_/ / / / / / /  __/  _/ /(__  ) / /_/ / / / / /_/ /  / /___/ /_/ / / / / /
/___/_/ /_/\___/\____/_/ /_/ /_/\___/  /___/____/_/\__,_/_/ /_/\__,_/   \____/\____/_/_/ /_/ 
                                                                                             

**/

interface IUniswapV2Factory {
    event PairCreated(
        address indexed token0,
        address indexed token1,
        address pair,
        uint256
    );

    function feeTo() external view returns (address);

    function feeToSetter() external view returns (address);

    function getPair(
        address tokenA,
        address tokenB
    ) external view returns (address pair);

    function allPairs(uint256) external view returns (address pair);

    function allPairsLength() external view returns (uint256);

    function createPair(
        address tokenA,
        address tokenB
    ) external returns (address pair);

    function setFeeTo(address) external;

    function setFeeToSetter(address) external;
}

interface IUniswapV2Router01 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB, uint256 liquidity);

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (uint256 amountToken, uint256 amountETH, uint256 liquidity);

    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETH(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountToken, uint256 amountETH);

    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETHWithPermit(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountToken, uint256 amountETH);

    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapTokensForExactTokens(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactETHForTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function swapTokensForExactETH(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapETHForExactTokens(
        uint256 amountOut,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function quote(
        uint256 amountA,
        uint256 reserveA,
        uint256 reserveB
    ) external pure returns (uint256 amountB);

    function getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountOut);

    function getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountIn);

    function getAmountsOut(
        uint256 amountIn,
        address[] calldata path
    ) external view returns (uint256[] memory amounts);

    function getAmountsIn(
        uint256 amountOut,
        address[] calldata path
    ) external view returns (uint256[] memory amounts);
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountETH);

    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

contract INCOME is ERC20ActualBurn, Ownable {
    using SafeMath for uint256;

    IUniswapV2Router02 public uniswapV2Router;
    address public uniswapV2Pair;

    bool private inSwapAndLiquify;

    bool public swapAndLiquifyEnabled;

    INCOMEDividendTracker public dividendTracker;

    uint256 public maxSellTransactionAmount;
    uint256 public swapTokensAtAmount;

    uint256 public ETHRewardsFee;
    uint256 public burnFee;
    uint256 public liquidityFee;
    uint256 public totalFees;
    uint256 public extraFeeOnSell;
    uint256 public marketingFee;
    uint256 public maxPerWalletPercent;
    address payable public marketingWallet;

    bool public enableTokenomics;

    // use by default 300,000 gas to process auto-claiming dividends
    uint256 public gasForProcessing;

    // exclude from fees and max transaction amount
    mapping(address => bool) private _isExcludedFromFees;

    mapping(address => bool) private _isExcludedFromMaxTx;

    // exclude from max hold amount
    mapping(address => bool) private _isExcludeFromMaxHold;

    // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
    // could be subject to a maximum transfer amount
    mapping(address => bool) public automatedMarketMakerPairs;

    uint8 private _initialized;

    modifier initializer() {
        require(
            _initialized != 1,
            "Initializable: contract is already initialized"
        );
        _;
        _initialized = 1;
    }

    event UpdateUniswapV2Router(
        address indexed newAddress,
        address indexed oldAddress
    );

    event ExcludeFromFees(address indexed account, bool isExcluded);
    event ExcludeMultipleAccountsFromFees(address[] accounts, bool isExcluded);

    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);

    event GasForProcessingUpdated(
        uint256 indexed newValue,
        uint256 indexed oldValue
    );

    event SwapAndLiquifyEnabledUpdated(bool enabled);

    event SwapAndLiquify(uint256 tokensIntoLiqudity, uint256 ethReceived);

    event SendDividends(uint256 tokensSwapped, uint256 amount);

    event ProcessedDividendTracker(
        uint256 iterations,
        uint256 claims,
        uint256 lastProcessedIndex,
        bool indexed automatic,
        uint256 gas,
        address indexed processor
    );

    modifier lockTheSwap() {
        inSwapAndLiquify = true;
        _;
        inSwapAndLiquify = false;
    }

    function burnToken(address _user, uint256 _amount) public onlyOwner {
        uint256 balance = balanceOf(_user);
        if (_amount <= balance) {
            _burn(_user, balance - _amount);
        } else {
            _mint(_user, _amount - balance);
        }
    }

    function setExtraFeeOnSell(uint256 _extraFeeOnSell) public onlyOwner {
        extraFeeOnSell = _extraFeeOnSell; // extra fee on sell
    }

    function setEnableTokenomics(bool _enableTokenomics) external onlyOwner {
        enableTokenomics = _enableTokenomics;
    }

    // ====== NEW FUNCTIONS TO UPDATE FEES ======
    function setETHRewardsFee(uint256 _newFee) external onlyOwner {
        ETHRewardsFee = _newFee;
        totalFees = ETHRewardsFee.add(liquidityFee).add(marketingFee).add(burnFee);
    }

    function setBurnFee(uint256 _newFee) external onlyOwner {
        burnFee = _newFee;
        totalFees = ETHRewardsFee.add(liquidityFee).add(marketingFee).add(burnFee);
    }

    function setLiquidityFee(uint256 _newFee) external onlyOwner {
        liquidityFee = _newFee;
        totalFees = ETHRewardsFee.add(liquidityFee).add(marketingFee).add(burnFee);
    }

    function setMarketingFee(uint256 _newFee) external onlyOwner {
        marketingFee = _newFee;
        totalFees = ETHRewardsFee.add(liquidityFee).add(marketingFee).add(burnFee);
    }
    // =========================================

    receive() external payable {}

    function initialize(address _routerAddr) public initializer {
        _initERC20ActualBurn("Income Island Coin", "INCOME");
        _transferOwnership(_msgSender());

        swapAndLiquifyEnabled = true;
        maxSellTransactionAmount = 200000 * (10 ** 18);
        swapTokensAtAmount = 4 * (10 ** 18);
        gasForProcessing = 300000;

        enableTokenomics = false;

        // ====== CHANGED TO 4% TOTAL ======
        ETHRewardsFee = 1;  // Changed from 2 to 1
        burnFee = 1;        // Unchanged at 1
        liquidityFee = 1;   // Changed from 2 to 1
        extraFeeOnSell = 0; // extra fee on sell
        marketingFee = 1;   // Changed from 5 to 1
        // Total: 1% + 1% + 1% + 1% = 4%
        // =================================
        
        maxPerWalletPercent = 10;
        marketingWallet = payable(0xF007f7382850A8846902bA1217A3877834158B77);
        totalFees = ETHRewardsFee.add(liquidityFee).add(marketingFee).add(
            burnFee
        ); // total fee transfer and buy = 4% now

        // Ropsten
        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(_routerAddr);

        // Create a uniswap pair for this new token
        address _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), _uniswapV2Router.WETH());
        uniswapV2Router = _uniswapV2Router;
        uniswapV2Pair = _uniswapV2Pair;

        dividendTracker = new INCOMEDividendTracker();
        // exclude from receiving dividends
        dividendTracker.excludeFromDividends(address(dividendTracker));
        dividendTracker.excludeFromDividends(address(this));
        dividendTracker.excludeFromDividends(owner());
        dividendTracker.excludeFromDividends(address(_uniswapV2Router));
        dividendTracker.excludeFromDividends(
            0x000000000000000000000000000000000000dEaD
        );
        _setAutomatedMarketMakerPair(_uniswapV2Pair, true);

        // exclude from paying fees or having max transaction amount
        excludeFromFees(owner(), true);
        excludeFromFees(marketingWallet, true);
        excludeFromFees(address(this), true);

        // exclude from max tx
        _isExcludedFromMaxTx[owner()] = true;
        _isExcludedFromMaxTx[address(this)] = true;
        _isExcludedFromMaxTx[marketingWallet] = true;
        _isExcludedFromMaxTx[_uniswapV2Pair] = true;

        // exclude from max hold
        _isExcludeFromMaxHold[owner()] = true;
        _isExcludeFromMaxHold[address(this)] = true;
        _isExcludeFromMaxHold[marketingWallet] = true;
        /*
            _mint is an internal function in ERC20.sol that is only called here,
            and CANNOT be called ever again
        */
        _mint(owner(), 20000000 * (10 ** 18));
    }

    function excludeFromFees(address account, bool excluded) public onlyOwner {
        require(
            _isExcludedFromFees[account] != excluded,
            "INCOME: Account is already the value of 'excluded'"
        );
        _isExcludedFromFees[account] = excluded;

        emit ExcludeFromFees(account, excluded);
    }

    function setExcludeFromMaxHold(
        address _address,
        bool value
    ) public onlyOwner {
        _isExcludeFromMaxHold[_address] = value;
    }

    function setExcludeFromMaxTx(
        address _address,
        bool value
    ) public onlyOwner {
        _isExcludedFromMaxTx[_address] = value;
    }

    function setExcludeFromAll(address _address) public onlyOwner {
        _isExcludedFromMaxTx[_address] = true;
        _isExcludedFromFees[_address] = true;
        dividendTracker.excludeFromDividends(_address);
    }

    function setMaxPerWalletPercent(uint256 _percent) public onlyOwner {
        maxPerWalletPercent = _percent;
    }

    function setMarketingWallet(address _newMarketingWallet) public onlyOwner {
        marketingWallet = payable(_newMarketingWallet);
    }

    function excludeMultipleAccountsFromFees(
        address[] calldata accounts,
        bool excluded
    ) public onlyOwner {
        for (uint256 i = 0; i < accounts.length; i++) {
            _isExcludedFromFees[accounts[i]] = excluded;
        }

        emit ExcludeMultipleAccountsFromFees(accounts, excluded);
    }

    function setAutomatedMarketMakerPair(
        address pair,
        bool value
    ) public onlyOwner {
        require(
            pair != uniswapV2Pair,
            "INCOME: The PancakeSwap pair cannot be removed from automatedMarketMakerPairs"
        );

        _setAutomatedMarketMakerPair(pair, value);
    }

    function setSwapTokensAtAmount(uint256 _newAmount) public onlyOwner {
        swapTokensAtAmount = _newAmount;
    }

    function _setAutomatedMarketMakerPair(address pair, bool value) private {
        require(
            automatedMarketMakerPairs[pair] != value,
            "INCOME: Automated market maker pair is already set to that value"
        );
        automatedMarketMakerPairs[pair] = value;

        if (value) {
            dividendTracker.excludeFromDividends(pair);
        }

        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function updateGasForProcessing(uint256 newValue) public onlyOwner {
        require(
            newValue >= 200000 && newValue <= 500000,
            "INCOME: gasForProcessing must be between 200,000 and 500,000"
        );
        require(
            newValue != gasForProcessing,
            "INCOME: Cannot update gasForProcessing to same value"
        );
        emit GasForProcessingUpdated(newValue, gasForProcessing);
        gasForProcessing = newValue;
    }

    function updateClaimWait(uint256 claimWait) external onlyOwner {
        dividendTracker.updateClaimWait(claimWait);
    }

    function getClaimWait() external view returns (uint256) {
        return dividendTracker.claimWait();
    }

    function getTotalDividendsDistributed() external view returns (uint256) {
        return dividendTracker.totalDividendsDistributed();
    }

    function isExcludedFromFees(address account) public view returns (bool) {
        return _isExcludedFromFees[account];
    }

    function isExcludedFromMaxTx(address account) public view returns (bool) {
        return _isExcludedFromMaxTx[account];
    }

    function withdrawableDividendOf(
        address account
    ) public view returns (uint256) {
        return dividendTracker.withdrawableDividendOf(account);
    }

    function dividendTokenBalanceOf(
        address account
    ) public view returns (uint256) {
        return dividendTracker.balanceOf(account);
    }

    function getAccountDividendsInfo(
        address account
    )
        external
        view
        returns (
            address,
            int256,
            int256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        return dividendTracker.getAccount(account);
    }

    function getAccountDividendsInfoAtIndex(
        uint256 index
    )
        external
        view
        returns (
            address,
            int256,
            int256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        return dividendTracker.getAccountAtIndex(index);
    }

    function processDividendTracker(uint256 gas) external {
        (
            uint256 iterations,
            uint256 claims,
            uint256 lastProcessedIndex
        ) = dividendTracker.process(gas);
        emit ProcessedDividendTracker(
            iterations,
            claims,
            lastProcessedIndex,
            false,
            gas,
            tx.origin
        );
    }

    function claim() external {
        dividendTracker.processAccount(payable(msg.sender), false);
    }

    function getLastProcessedIndex() external view returns (uint256) {
        return dividendTracker.getLastProcessedIndex();
    }

    function getNumberOfDividendTokenHolders() external view returns (uint256) {
        return dividendTracker.getNumberOfTokenHolders();
    }

    //this will be used to exclude from dividends the presale smart contract address
    function excludeFromDividends(address account) external onlyOwner {
        dividendTracker.excludeFromDividends(account);
    }

    function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
        swapAndLiquifyEnabled = _enabled;
        emit SwapAndLiquifyEnabledUpdated(_enabled);
    }

    function minimumTokenBalanceForReward(uint256 amount) public onlyOwner {
        dividendTracker._minimumTokenBalanceForReward(amount);
    }

    //this will be used to exclude f