DebtAllocator

{{
  "language": "Solidity",
  "sources": {
    "src/DebtAllocator.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.18;

import {Strategy} from "./Strategy.sol";
import {IVault} from "../lib/tokenized-strategy-periphery/lib/yearn-vaults-v3/contracts/interfaces/IVault.sol";
import {Governance} from "@periphery/utils/Governance.sol";

contract DebtAllocator is Governance {

    address public immutable vault;
    address public immutable strategy;
    
    constructor(address _governance, address _vault, address _strategy) Governance(_governance) {
        vault = _vault;
        strategy = _strategy;
    }

    function yeetIt(uint256 _amount) external onlyGovernance {
        _yeet(_amount);
    }

    function _yeet(uint256 _amount) internal {
        uint256 currentDebt = IVault(vault).strategies(strategy).current_debt;
        IVault(vault).update_debt(strategy, currentDebt + _amount);
        Strategy(strategy).yeet(_amount);
    }

    function yeetMany(uint256 _times) external onlyGovernance {
        for (uint256 i = 0; i < _times; i++) {
            _yeet(IVault(vault).totalIdle());
        }
    }
}"
    },
    "src/Strategy.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.18;

import {Base4626Compounder} from "@periphery/Bases/4626Compounder/Base4626Compounder.sol";
contract Strategy is Base4626Compounder {

    constructor(
        address _asset,
        string memory _name,
        address _vault
    ) Base4626Compounder(_asset, _name, _vault) {}

    function _deployFunds(uint256 _amount) internal override {
        return;
    }

    function yeet(uint256 _amount) external onlyKeepers {
        vault.deposit(_amount, address(this));
    }
}
"
    },
    "lib/tokenized-strategy-periphery/lib/yearn-vaults-v3/contracts/interfaces/IVault.sol": {
      "content": "// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.8.18;

import {IERC4626} from "@openzeppelin/contracts/interfaces/IERC4626.sol";

interface IVault is IERC4626 {
    // STRATEGY EVENTS
    event StrategyChanged(address indexed strategy, uint256 change_type);
    event StrategyReported(
        address indexed strategy,
        uint256 gain,
        uint256 loss,
        uint256 current_debt,
        uint256 protocol_fees,
        uint256 total_fees,
        uint256 total_refunds
    );
    // DEBT MANAGEMENT EVENTS
    event DebtUpdated(
        address indexed strategy,
        uint256 current_debt,
        uint256 new_debt
    );
    // ROLE UPDATES
    event RoleSet(address indexed account, uint256 role);
    event UpdateFutureRoleManager(address indexed future_role_manager);
    event UpdateRoleManager(address indexed role_manager);

    event UpdateAccountant(address indexed accountant);
    event UpdateDefaultQueue(address[] new_default_queue);
    event UpdateUseDefaultQueue(bool use_default_queue);
    event UpdatedMaxDebtForStrategy(
        address indexed sender,
        address indexed strategy,
        uint256 new_debt
    );
    event UpdateAutoAllocate(bool auto_allocate);
    event UpdateDepositLimit(uint256 deposit_limit);
    event UpdateMinimumTotalIdle(uint256 minimum_total_idle);
    event UpdateProfitMaxUnlockTime(uint256 profit_max_unlock_time);
    event DebtPurchased(address indexed strategy, uint256 amount);
    event Shutdown();

    struct StrategyParams {
        uint256 activation;
        uint256 last_report;
        uint256 current_debt;
        uint256 max_debt;
    }

    function FACTORY() external view returns (uint256);

    function strategies(address) external view returns (StrategyParams memory);

    function default_queue(uint256) external view returns (address);

    function use_default_queue() external view returns (bool);

    function auto_allocate() external view returns (bool);

    function minimum_total_idle() external view returns (uint256);

    function deposit_limit() external view returns (uint256);

    function deposit_limit_module() external view returns (address);

    function withdraw_limit_module() external view returns (address);

    function accountant() external view returns (address);

    function roles(address) external view returns (uint256);

    function role_manager() external view returns (address);

    function future_role_manager() external view returns (address);

    function isShutdown() external view returns (bool);

    function nonces(address) external view returns (uint256);

    function initialize(
        address,
        string memory,
        string memory,
        address,
        uint256
    ) external;

    function setName(string memory) external;

    function setSymbol(string memory) external;

    function set_accountant(address new_accountant) external;

    function set_default_queue(address[] memory new_default_queue) external;

    function set_use_default_queue(bool) external;

    function set_auto_allocate(bool) external;

    function set_deposit_limit(uint256 deposit_limit) external;

    function set_deposit_limit(
        uint256 deposit_limit,
        bool should_override
    ) external;

    function set_deposit_limit_module(
        address new_deposit_limit_module
    ) external;

    function set_deposit_limit_module(
        address new_deposit_limit_module,
        bool should_override
    ) external;

    function set_withdraw_limit_module(
        address new_withdraw_limit_module
    ) external;

    function set_minimum_total_idle(uint256 minimum_total_idle) external;

    function setProfitMaxUnlockTime(
        uint256 new_profit_max_unlock_time
    ) external;

    function set_role(address account, uint256 role) external;

    function add_role(address account, uint256 role) external;

    function remove_role(address account, uint256 role) external;

    function transfer_role_manager(address role_manager) external;

    function accept_role_manager() external;

    function unlockedShares() external view returns (uint256);

    function pricePerShare() external view returns (uint256);

    function get_default_queue() external view returns (address[] memory);

    function process_report(
        address strategy
    ) external returns (uint256, uint256);

    function buy_debt(address strategy, uint256 amount) external;

    function add_strategy(address new_strategy) external;

    function revoke_strategy(address strategy) external;

    function force_revoke_strategy(address strategy) external;

    function update_max_debt_for_strategy(
        address strategy,
        uint256 new_max_debt
    ) external;

    function update_debt(
        address strategy,
        uint256 target_debt
    ) external returns (uint256);

    function update_debt(
        address strategy,
        uint256 target_debt,
        uint256 max_loss
    ) external returns (uint256);

    function shutdown_vault() external;

    function totalIdle() external view returns (uint256);

    function totalDebt() external view returns (uint256);

    function apiVersion() external view returns (string memory);

    function assess_share_of_unrealised_losses(
        address strategy,
        uint256 assets_needed
    ) external view returns (uint256);

    function profitMaxUnlockTime() external view returns (uint256);

    function fullProfitUnlockDate() external view returns (uint256);

    function profitUnlockingRate() external view returns (uint256);

    function lastProfitUpdate() external view returns (uint256);

    //// NON-STANDARD ERC-4626 FUNCTIONS \\\\

    function withdraw(
        uint256 assets,
        address receiver,
        address owner,
        uint256 max_loss
    ) external returns (uint256);

    function withdraw(
        uint256 assets,
        address receiver,
        address owner,
        uint256 max_loss,
        address[] memory strategies
    ) external returns (uint256);

    function redeem(
        uint256 shares,
        address receiver,
        address owner,
        uint256 max_loss
    ) external returns (uint256);

    function redeem(
        uint256 shares,
        address receiver,
        address owner,
        uint256 max_loss,
        address[] memory strategies
    ) external returns (uint256);

    function maxWithdraw(
        address owner,
        uint256 max_loss
    ) external view returns (uint256);

    function maxWithdraw(
        address owner,
        uint256 max_loss,
        address[] memory strategies
    ) external view returns (uint256);

    function maxRedeem(
        address owner,
        uint256 max_loss
    ) external view returns (uint256);

    function maxRedeem(
        address owner,
        uint256 max_loss,
        address[] memory strategies
    ) external view returns (uint256);

    //// NON-STANDARD ERC-20 FUNCTIONS \\\\

    function DOMAIN_SEPARATOR() external view returns (bytes32);

    function permit(
        address owner,
        address spender,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (bool);
}
"
    },
    "lib/tokenized-strategy-periphery/src/utils/Governance.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

contract Governance {
    /// @notice Emitted when the governance address is updated.
    event GovernanceTransferred(
        address indexed previousGovernance,
        address indexed newGovernance
    );

    modifier onlyGovernance() {
        _checkGovernance();
        _;
    }

    /// @notice Checks if the msg sender is the governance.
    function _checkGovernance() internal view virtual {
        require(governance == msg.sender, "!governance");
    }

    /// @notice Address that can set the default base fee and provider
    address public governance;

    constructor(address _governance) {
        governance = _governance;

        emit GovernanceTransferred(address(0), _governance);
    }

    /**
     * @notice Sets a new address as the governance of the contract.
     * @dev Throws if the caller is not current governance.
     * @param _newGovernance The new governance address.
     */
    function transferGovernance(
        address _newGovernance
    ) external virtual onlyGovernance {
        require(_newGovernance != address(0), "ZERO ADDRESS");
        address oldGovernance = governance;
        governance = _newGovernance;

        emit GovernanceTransferred(oldGovernance, _newGovernance);
    }
}
"
    },
    "lib/tokenized-strategy-periphery/src/Bases/4626Compounder/Base4626Compounder.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

// We use the Tokenized Strategy interface.
import {IStrategy} from "@tokenized-strategy/interfaces/IStrategy.sol";
import {BaseHealthCheck, ERC20} from "../HealthCheck/BaseHealthCheck.sol";

import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

/**
 * @title Base4626Compounder
 * @dev Can be used to make a simple strategy that compounds
 *   rewards for any 4626 vault.
 */
contract Base4626Compounder is BaseHealthCheck {
    using SafeERC20 for ERC20;

    IStrategy public immutable vault;

    constructor(
        address _asset,
        string memory _name,
        address _vault
    ) BaseHealthCheck(_asset, _name) {
        require(IStrategy(_vault).asset() == _asset, "wrong vault");
        vault = IStrategy(_vault);

        asset.safeApprove(_vault, type(uint256).max);
    }

    /*//////////////////////////////////////////////////////////////
                NEEDED TO BE OVERRIDDEN BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Should deploy up to '_amount' of 'asset' in the yield source.
     *
     * This function is called at the end of a {deposit} or {mint}
     * call. Meaning that unless a whitelist is implemented it will
     * be entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy should attempt
     * to deposit in the yield source.
     */
    function _deployFunds(uint256 _amount) internal virtual override {
        vault.deposit(_amount, address(this));
        _stake();
    }

    /**
     * @dev Will attempt to free the '_amount' of 'asset'.
     *
     * The amount of 'asset' that is already loose has already
     * been accounted for.
     *
     * This function is called during {withdraw} and {redeem} calls.
     * Meaning that unless a whitelist is implemented it will be
     * entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * Should not rely on asset.balanceOf(address(this)) calls other than
     * for diff accounting purposes.
     *
     * Any difference between `_amount` and what is actually freed will be
     * counted as a loss and passed on to the withdrawer. This means
     * care should be taken in times of illiquidity. It may be better to revert
     * if withdraws are simply illiquid so not to realize incorrect losses.
     *
     * @param _amount, The amount of 'asset' to be freed.
     */
    function _freeFunds(uint256 _amount) internal virtual override {
        // Use previewWithdraw to round up.
        uint256 shares = vault.previewWithdraw(_amount);

        uint256 vaultBalance = balanceOfVault();
        if (shares > vaultBalance) {
            unchecked {
                _unStake(shares - vaultBalance);
            }
            shares = Math.min(shares, balanceOfVault());
        }

        vault.redeem(shares, address(this), address(this));
    }

    /**
     * @dev Internal function to harvest all rewards, redeploy any idle
     * funds and return an accurate accounting of all funds currently
     * held by the Strategy.
     *
     * This should do any needed harvesting, rewards selling, accrual,
     * redepositing etc. to get the most accurate view of current assets.
     *
     * NOTE: All applicable assets including loose assets should be
     * accounted for in this function.
     *
     * Care should be taken when relying on oracles or swap values rather
     * than actual amounts as all Strategy profit/loss accounting will
     * be done based on this returned value.
     *
     * This can still be called post a shutdown, a strategist can check
     * `TokenizedStrategy.isShutdown()` to decide if funds should be
     * redeployed or simply realize any profits/losses.
     *
     * @return _totalAssets A trusted and accurate account for the total
     * amount of 'asset' the strategy currently holds including idle funds.
     */
    function _harvestAndReport()
        internal
        virtual
        override
        returns (uint256 _totalAssets)
    {
        // Claim and sell any rewards.
        _claimAndSellRewards();

        // Return total balance
        _totalAssets = balanceOfAsset() + valueOfVault();
    }

    /**
     * @dev Override to stake loose vault tokens after they
     *   are deposited to the `vault`.
     */
    function _stake() internal virtual {}

    /**
     * @dev If vault tokens are staked, override to unstake them before
     *   any withdraw or redeems.
     * @param _amount The amount of vault tokens to unstake.
     */
    function _unStake(uint256 _amount) internal virtual {}

    /**
     * @dev Called during reports to do any harvesting of rewards needed.
     */
    function _claimAndSellRewards() internal virtual {}

    /**
     * @notice Return the current loose balance of this strategies `asset`.
     */
    function balanceOfAsset() public view virtual returns (uint256) {
        return asset.balanceOf(address(this));
    }

    /**
     * @notice Return the current balance of the strategies vault shares.
     */
    function balanceOfVault() public view virtual returns (uint256) {
        return vault.balanceOf(address(this));
    }

    /**
     * @notice If the vaults tokens are staked. To override and return the
     *  amount of vault tokens the strategy has staked.
     */
    function balanceOfStake() public view virtual returns (uint256) {}

    /**
     * @notice The full value denominated in `asset` of the strategies vault
     *   tokens held both in the contract and staked.
     */
    function valueOfVault() public view virtual returns (uint256) {
        return vault.convertToAssets(balanceOfVault() + balanceOfStake());
    }

    /**
     * @notice The max amount of `asset` than can be redeemed from the vault.
     * @dev If the vault tokens are staked this needs to include the
     *  vault.maxRedeem(stakingContract) to be accurate.
     *
     *  NOTE: This should use vault.convertToAssets(vault.maxRedeem(address));
     *    rather than vault.maxWithdraw(address);
     */
    function vaultsMaxWithdraw() public view virtual returns (uint256) {
        return vault.convertToAssets(vault.maxRedeem(address(this)));
    }

    /**
     * @notice Gets the max amount of `asset` that an address can deposit.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any deposit or mints to enforce
     * any limits desired by the strategist. This can be used for either a
     * traditional deposit limit or for implementing a whitelist etc.
     *
     *   EX:
     *      if(isAllowed[_owner]) return super.availableDepositLimit(_owner);
     *
     * This does not need to take into account any conversion rates
     * from shares to assets. But should know that any non max uint256
     * amounts may be converted to shares. So it is recommended to keep
     * custom amounts low enough as not to cause overflow when multiplied
     * by `totalSupply`.
     *
     * @param . The address that is depositing into the strategy.
     * @return . The available amount the `_owner` can deposit in terms of `asset`
     */
    function availableDepositLimit(
        address
    ) public view virtual override returns (uint256) {
        // Return the max amount the vault will allow for deposits.
        return vault.maxDeposit(address(this));
    }

    /**
     * @notice Gets the max amount of `asset` that can be withdrawn.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any withdraw or redeem to enforce
     * any limits desired by the strategist. This can be used for illiquid
     * or sandwichable strategies. It should never be lower than `totalIdle`.
     *
     *   EX:
     *       return TokenIzedStrategy.totalIdle();
     *
     * This does not need to take into account the `_owner`'s share balance
     * or conversion rates from shares to assets.
     *
     * @param . The address that is withdrawing from the strategy.
     * @return . The available amount that can be withdrawn in terms of `asset`
     */
    function availableWithdrawLimit(
        address
    ) public view virtual override returns (uint256) {
        // Return the loose balance of asset and the max we can withdraw from the vault
        return balanceOfAsset() + vaultsMaxWithdraw();
    }

    /**
     * @dev Optional function for a strategist to override that will
     * allow management to manually withdraw deployed funds from the
     * yield source if a strategy is shutdown.
     *
     * This should attempt to free `_amount`, noting that `_amount` may
     * be more than is currently deployed.
     *
     * NOTE: This will not realize any profits or losses. A separate
     * {report} will be needed in order to record any profit/loss. If
     * a report may need to be called after a shutdown it is important
     * to check if the strategy is shutdown during {_harvestAndReport}
     * so that it does not simply re-deploy all funds that had been freed.
     *
     * EX:
     *   if(freeAsset > 0 && !TokenizedStrategy.isShutdown()) {
     *       depositFunds...
     *    }
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function _emergencyWithdraw(uint256 _amount) internal virtual override {
        _freeFunds(Math.min(_amount, vaultsMaxWithdraw()));
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/interfaces/IERC4626.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";
import "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}
"
    },
    "lib/tokenized-strategy/src/interfaces/IStrategy.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {ITokenizedStrategy} from "./ITokenizedStrategy.sol";
import {IBaseStrategy} from "./IBaseStrategy.sol";

interface IStrategy is IBaseStrategy, ITokenizedStrategy {}
"
    },
    "lib/tokenized-strategy-periphery/src/Bases/HealthCheck/BaseHealthCheck.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {BaseStrategy, ERC20} from "@tokenized-strategy/BaseStrategy.sol";

/**
 *   @title Base Health Check
 *   @author Yearn.finance
 *   @notice This contract can be inherited by any Yearn
 *   V3 strategy wishing to implement a health check during
 *   the `report` function in order to prevent any unexpected
 *   behavior from being permanently recorded as well as the
 *   `checkHealth` modifier.
 *
 *   A strategist simply needs to inherit this contract. Set
 *   the limit ratios to the desired amounts and then
 *   override `_harvestAndReport()` just as they otherwise
 *  would. If the profit or loss that would be recorded is
 *   outside the acceptable bounds the tx will revert.
 *
 *   The healthcheck does not prevent a strategy from reporting
 *   losses, but rather can make sure manual intervention is
 *   needed before reporting an unexpected loss or profit.
 */
abstract contract BaseHealthCheck is BaseStrategy {
    // Can be used to determine if a healthcheck should be called.
    // Defaults to true;
    bool public doHealthCheck = true;

    uint256 internal constant MAX_BPS = 10_000;

    // Default profit limit to 100%.
    uint16 private _profitLimitRatio = uint16(MAX_BPS);

    // Defaults loss limit to 0.
    uint16 private _lossLimitRatio;

    constructor(
        address _asset,
        string memory _name
    ) BaseStrategy(_asset, _name) {}

    /**
     * @notice Returns the current profit limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current profit limit ratio.
     */
    function profitLimitRatio() public view returns (uint256) {
        return _profitLimitRatio;
    }

    /**
     * @notice Returns the current loss limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current loss limit ratio.
     */
    function lossLimitRatio() public view returns (uint256) {
        return _lossLimitRatio;
    }

    /**
     * @notice Set the `profitLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function setProfitLimitRatio(
        uint256 _newProfitLimitRatio
    ) external onlyManagement {
        _setProfitLimitRatio(_newProfitLimitRatio);
    }

    /**
     * @dev Internally set the profit limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function _setProfitLimitRatio(uint256 _newProfitLimitRatio) internal {
        require(_newProfitLimitRatio > 0, "!zero profit");
        require(_newProfitLimitRatio <= type(uint16).max, "!too high");
        _profitLimitRatio = uint16(_newProfitLimitRatio);
    }

    /**
     * @notice Set the `lossLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function setLossLimitRatio(
        uint256 _newLossLimitRatio
    ) external onlyManagement {
        _setLossLimitRatio(_newLossLimitRatio);
    }

    /**
     * @dev Internally set the loss limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function _setLossLimitRatio(uint256 _newLossLimitRatio) internal {
        require(_newLossLimitRatio < MAX_BPS, "!loss limit");
        _lossLimitRatio = uint16(_newLossLimitRatio);
    }

    /**
     * @notice Turns the healthcheck on and off.
     * @dev If turned off the next report will auto turn it back on.
     * @param _doHealthCheck Bool if healthCheck should be done.
     */
    function setDoHealthCheck(bool _doHealthCheck) public onlyManagement {
        doHealthCheck = _doHealthCheck;
    }

    /**
     * @notice OVerrides the default {harvestAndReport} to include a healthcheck.
     * @return _totalAssets New totalAssets post report.
     */
    function harvestAndReport()
        external
        override
        onlySelf
        returns (uint256 _totalAssets)
    {
        // Let the strategy report.
        _totalAssets = _harvestAndReport();

        // Run the healthcheck on the amount returned.
        _executeHealthCheck(_totalAssets);
    }

    /**
     * @dev To be called during a report to make sure the profit
     * or loss being recorded is within the acceptable bound.
     *
     * @param _newTotalAssets The amount that will be reported.
     */
    function _executeHealthCheck(uint256 _newTotalAssets) internal virtual {
        if (!doHealthCheck) {
            doHealthCheck = true;
            return;
        }

        // Get the current total assets from the implementation.
        uint256 currentTotalAssets = TokenizedStrategy.totalAssets();

        if (_newTotalAssets > currentTotalAssets) {
            require(
                ((_newTotalAssets - currentTotalAssets) <=
                    (currentTotalAssets * uint256(_profitLimitRatio)) /
                        MAX_BPS),
                "healthCheck"
            );
        } else if (currentTotalAssets > _newTotalAssets) {
            require(
                (currentTotalAssets - _newTotalAssets <=
                    ((currentTotalAssets * uint256(_lossLimitRatio)) /
                        MAX_BPS)),
                "healthCheck"
            );
        }
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/utils/math/Math.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
"
    },
    "lib/tokenized-strategy/src/interfaces/ITokenizedStrategy.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IERC4626} from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";

// Interface that implements the 4626 standard and the implementation functions
interface ITokenizedStrategy is IERC4626, IERC20Permit {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event StrategyShutdown();

    event NewTokenizedStrategy(
        address indexed strategy,
        address indexed asset,
        string apiVersion
    );

    event Reported(
        uint256 profit,
        uint256 loss,
        uint256 protocolFees,
        uint256 performanceFees
    );

    event UpdatePerformanceFeeRecipient(
        address indexed newPerformanceFeeRecipient
    );

    event UpdateKeeper(address indexed newKeeper);

    event UpdatePerformanceFee(uint16 newPerformanceFee);

    event UpdateManagement(address indexed newManagement);

    event UpdateEmergencyAdmin(address indexed newEmergencyAdmin);

    event UpdateProfitMaxUnlockTime(uint256 newProfitMaxUnlockTime);

    event UpdatePendingManagement(address indexed newPendingManagement);

    /*//////////////////////////////////////////////////////////////
                           INITIALIZATION
    //////////////////////////////////////////////////////////////*/

    function initialize(
        address _asset,
        string memory _name,