YoSecondaryVault

{{
  "language": "Solidity",
  "sources": {
    "src/YoSecondaryVault.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity 0.8.28;

import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";

import {Errors} from "./libraries/Errors.sol";

import {YoVault} from "./YoVault.sol";

// __   __    ____            _                  _
// \ \ / /__ |  _ \ _ __ ___ | |_ ___   ___ ___ | |
//  \ V / _ \| |_) | '__/ _ \| __/ _ \ / __/ _ \| |
//   | | (_) |  __/| | | (_) | || (_) | (_| (_) | |
//   |_|\___/|_|   |_|  \___/ \__\___/ \___\___/|_|
contract YoSecondaryVault is YoVault {
    using Math for uint256;

    event SharePriceUpdated(uint256 lastSharePrice, uint256 newSharePrice);

    function initializeV2(uint256 _lastPricePerShare) public reinitializer(2) {
        lastPricePerShare = _lastPricePerShare;
        aggregatedUnderlyingBalances = 0;
    }

    function onUnderlyingBalanceUpdate(uint256 newUnderlyingBalance) external override requiresAuth {
        revert Errors.UseOnSharePriceUpdate();
    }

    /// @dev Can be called only once per block.
    /// @param newSharePrice The new share price shared between all deposit vaults.
    function onSharePriceUpdate(uint256 newSharePrice) external requiresAuth {
        require(block.number > lastBlockUpdated, Errors.UpdateAlreadyCompletedInThisBlock());

        uint256 percentageChange = _calculatePercentageChange(lastPricePerShare, newSharePrice);

        /// @dev Pause the vault if the percentage change is greater than the threshold (works in both directions)
        if (percentageChange > maxPercentageChange) {
            _pause();
            return;
        }

        emit SharePriceUpdated(lastPricePerShare, newSharePrice);

        lastPricePerShare = newSharePrice;
        lastBlockUpdated = block.number;
    }

    /// @dev Converts assets to shares using the last price per share directly, ignoring the total assets and total
    /// supply (shares)
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view override returns (uint256) {
        return assets.mulDiv(10 ** decimals(), lastPricePerShare, rounding);
    }

    /// @dev Converts assets to shares using the last price per share directly, ignoring the total assets and total
    /// supply (shares)
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view override returns (uint256) {
        return shares.mulDiv(lastPricePerShare, 10 ** decimals(), rounding);
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/math/Math.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an success flag (no overflow).
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an success flag (no overflow).
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an success flag (no overflow).
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * SafeCast.toUint(condition));
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }

        // The following calculation ensures accurate ceiling division without overflow.
        // Since a is non-zero, (a - 1) / b will not overflow.
        // The largest possible result occurs when (a - 1) / b is type(uint256).max,
        // but the largest value we can obtain is type(uint256).max - 1, which happens
        // when a = type(uint256).max and b = 1.
        unchecked {
            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
        }
    }

    /**
     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     *
     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use
            // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2²⁵⁶ + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.
            if (denominator <= prod1) {
                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such
            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶
            inverse *= 2 - denominator * inverse; // inverse mod 2³²
            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴
            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is
            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
    }

    /**
     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
     *
     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.
     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
     *
     * If the input value is not inversible, 0 is returned.
     *
     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
     */
    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
        unchecked {
            if (n == 0) return 0;

            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
            // Used to compute integers x and y such that: ax + ny = gcd(a, n).
            // When the gcd is 1, then the inverse of a modulo n exists and it's x.
            // ax + ny = 1
            // ax = 1 + (-y)n
            // ax ≡ 1 (mod n) # x is the inverse of a modulo n

            // If the remainder is 0 the gcd is n right away.
            uint256 remainder = a % n;
            uint256 gcd = n;

            // Therefore the initial coefficients are:
            // ax + ny = gcd(a, n) = n
            // 0a + 1n = n
            int256 x = 0;
            int256 y = 1;

            while (remainder != 0) {
                uint256 quotient = gcd / remainder;

                (gcd, remainder) = (
                    // The old remainder is the next gcd to try.
                    remainder,
                    // Compute the next remainder.
                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
                    // where gcd is at most n (capped to type(uint256).max)
                    gcd - remainder * quotient
                );

                (x, y) = (
                    // Increment the coefficient of a.
                    y,
                    // Decrement the coefficient of n.
                    // Can overflow, but the result is casted to uint256 so that the
                    // next value of y is "wrapped around" to a value between 0 and n - 1.
                    x - y * int256(quotient)
                );
            }

            if (gcd != 1) return 0; // No inverse exists.
            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
        }
    }

    /**
     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
     *
     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that
     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.
     *
     * NOTE: this function does NOT check that `p` is a prime greater than `2`.
     */
    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
        unchecked {
            return Math.modExp(a, p - 2, p);
        }
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
     *
     * Requirements:
     * - modulus can't be zero
     * - underlying staticcall to precompile must succeed
     *
     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
     * sure the chain you're using it on supports the precompiled contract for modular exponentiation
     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly
     * interpreted as 0.
     */
    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
        (bool success, uint256 result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
     * to operate modulo 0 or if the underlying precompile reverted.
     *
     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
     * of a revert, but the result may be incorrectly interpreted as 0.
     */
    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
        if (m == 0) return (false, 0);
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            // | Offset    | Content    | Content (Hex)                                                      |
            // |-----------|------------|--------------------------------------------------------------------|
            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x60:0x7f | value of b | 0x<.............................................................b> |
            // | 0x80:0x9f | value of e | 0x<.............................................................e> |
            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |
            mstore(ptr, 0x20)
            mstore(add(ptr, 0x20), 0x20)
            mstore(add(ptr, 0x40), 0x20)
            mstore(add(ptr, 0x60), b)
            mstore(add(ptr, 0x80), e)
            mstore(add(ptr, 0xa0), m)

            // Given the result < m, it's guaranteed to fit in 32 bytes,
            // so we can use the memory scratch space located at offset 0.
            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
            result := mload(0x00)
        }
    }

    /**
     * @dev Variant of {modExp} that supports inputs of arbitrary length.
     */
    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
        (bool success, bytes memory result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.
     */
    function tryModExp(
        bytes memory b,
        bytes memory e,
        bytes memory m
    ) internal view returns (bool success, bytes memory result) {
        if (_zeroBytes(m)) return (false, new bytes(0));

        uint256 mLen = m.length;

        // Encode call args in result and move the free memory pointer
        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);

        assembly ("memory-safe") {
            let dataPtr := add(result, 0x20)
            // Write result on top of args to avoid allocating extra memory.
            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
            // Overwrite the length.
            // result.length > returndatasize() is guaranteed because returndatasize() == m.length
            mstore(result, mLen)
            // Set the memory pointer after the returned data.
            mstore(0x40, add(dataPtr, mLen))
        }
    }

    /**
     * @dev Returns whether the provided byte array is zero.
     */
    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
        for (uint256 i = 0; i < byteArray.length; ++i) {
            if (byteArray[i] != 0) {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only
     * using integer operations.
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        unchecked {
            // Take care of easy edge cases when a == 0 or a == 1
            if (a <= 1) {
                return a;
            }

            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
            // the current value as `ε_n = | x_n - sqrt(a) |`.
            //
            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is
            // bigger than any uint256.
            //
            // By noticing that
            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`
            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
            // to the msb function.
            uint256 aa = a;
            uint256 xn = 1;

            if (aa >= (1 << 128)) {
                aa >>= 128;
                xn <<= 64;
            }
            if (aa >= (1 << 64)) {
                aa >>= 64;
                xn <<= 32;
            }
            if (aa >= (1 << 32)) {
                aa >>= 32;
                xn <<= 16;
            }
            if (aa >= (1 << 16)) {
                aa >>= 16;
                xn <<= 8;
            }
            if (aa >= (1 << 8)) {
                aa >>= 8;
                xn <<= 4;
            }
            if (aa >= (1 << 4)) {
                aa >>= 4;
                xn <<= 2;
            }
            if (aa >= (1 << 2)) {
                xn <<= 1;
            }

            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).
            //
            // We can refine our estimation by noticing that the middle of that interval minimizes the error.
            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).
            // This is going to be our x_0 (and ε_0)
            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)

            // From here, Newton's method give us:
            // x_{n+1} = (x_n + a / x_n) / 2
            //
            // One should note that:
            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
            //              = ((x_n² + a) / (2 * x_n))² - a
            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a
            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)
            //              = (x_n² - a)² / (2 * x_n)²
            //              = ((x_n² - a) / (2 * x_n))²
            //              ≥ 0
            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n
            //
            // This gives us the proof of quadratic convergence of the sequence:
            // ε_{n+1} = | x_{n+1} - sqrt(a) |
            //         = | (x_n + a / x_n) / 2 - sqrt(a) |
            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
            //         = | (x_n - sqrt(a))² / (2 * x_n) |
            //         = | ε_n² / (2 * x_n) |
            //         = ε_n² / | (2 * x_n) |
            //
            // For the first iteration, we have a special case where x_0 is known:
            // ε_1 = ε_0² / | (2 * x_0) |
            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))
            //     ≤ 2**(e-3) / 3
            //     ≤ 2**(e-3-log2(3))
            //     ≤ 2**(e-4.5)
            //
            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:
            // ε_{n+1} = ε_n² / | (2 * x_n) |
            //         ≤ (2**(e-k))² / (2 * 2**(e-1))
            //         ≤ 2**(2*e-2*k) / 2**e
            //         ≤ 2**(e-2*k)
            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above
            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5
            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9
            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18
            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36
            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72

            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision
            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
            // sqrt(a) or sqrt(a) + 1.
            return xn - SafeCast.toUint(xn > a / xn);
        }
    }

    /**
     * @dev Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        uint256 exp;
        unchecked {
            exp = 128 * SafeCast.toUint(value > (1 << 128) - 1);
            value >>= exp;
            result += exp;

            exp = 64 * SafeCast.toUint(value > (1 << 64) - 1);
            value >>= exp;
            result += exp;

            exp = 32 * SafeCast.toUint(value > (1 << 32) - 1);
            value >>= exp;
            result += exp;

            exp = 16 * SafeCast.toUint(value > (1 << 16) - 1);
            value >>= exp;
            result += exp;

            exp = 8 * SafeCast.toUint(value > (1 << 8) - 1);
            value >>= exp;
            result += exp;

            exp = 4 * SafeCast.toUint(value > (1 << 4) - 1);
            value >>= exp;
            result += exp;

            exp = 2 * SafeCast.toUint(value > (1 << 2) - 1);
            value >>= exp;
            result += exp;

            result += SafeCast.toUint(value > 1);
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        uint256 isGt;
        unchecked {
            isGt = SafeCast.toUint(value > (1 << 128) - 1);
            value >>= isGt * 128;
            result += isGt * 16;

            isGt = SafeCast.toUint(value > (1 << 64) - 1);
            value >>= isGt * 64;
            result += isGt * 8;

            isGt = SafeCast.toUint(value > (1 << 32) - 1);
            value >>= isGt * 32;
            result += isGt * 4;

            isGt = SafeCast.toUint(value > (1 << 16) - 1);
            value >>= isGt * 16;
            result += isGt * 2;

            result += SafeCast.toUint(value > (1 << 8) - 1);
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}
"
    },
    "src/libraries/Errors.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity 0.8.28;

library Errors {
    //============================== GENERICS ===============================
    /// @notice Thrown when an unauthorized method to a target is called.
    /// @dev The method must be authorized by setUserRole and setRoleCapability from RolesAuthority
    error TargetMethodNotAuthorized(address target, bytes4 functionSig);

    /// @notice Thrown when insufficient shares balance is available to complete the operation.
    error InsufficientShares();

    /// @notice Thrown when the operation is called by a user that is not the owner of the shares.
    error NotSharesOwner();

    /// @notice Thrown when the input shares amount is zero.
    error SharesAmountZero();

    /// @notice Thrown when a claim request is fulfilled with an invalid shares amount.
    error InvalidSharesAmount();

    /// @notice Thrown when a withdraw is attempted with an amount different than the claimable assets.
    error InvalidAssetsAmount();

    /// @notice Thrown when the new max percentage is greater than the current max percentage.
    error InvalidMaxPercentage();

    /// @notice Thrown when the new fee is greater than the max allowed fee.
    error InvalidFee();

    /// @notice Thrown when the underlying balance has already been updated in the current block.
    error UpdateAlreadyCompletedInThisBlock();

    /// @notice Thrown when redeem() or withdraw() is called
    error UseRequestRedeem();

    error UseOnSharePriceUpdate();

    /// @notice Thrown when msg.sender is not the vault
    error Escrow__OnlyVault();

    /// @notice Thrown when the requested amount of assets is zero
    error Escrow__AmountZero();

    /// @notice Thrown when the vault address is zero
    error Registry__VaultAddressZero();

    /// @notice Thrown when the vault already exists
    error Registry__VaultAlreadyExists(address vaultAddress);

    /// @notice Thrown when the vault does not exist
    error Registry__VaultNotExists(address vaultAddress);

    /// @notice Thrown when the vault is not allowed
    error Gateway__VaultNotAllowed();

    /// @notice Thrown when the amount is zero
    error Gateway__ZeroAmount();

    /// @notice Thrown when the receiver is zero
    error Gateway__ZeroReceiver();

    /// @notice Thrown when the shares out is less than the minimum shares out
    error Gateway__InsufficientSharesOut(uint256 sharesOut, uint256 minSharesOut);

    /// @notice Thrown when the owner of the shares is zero
    error Gateway__ZeroOwner();

    /// @notice Thrown when the assets out is less than the minimum assets out
    error Gateway__InsufficientAssetsOut(uint256 assetsOut, uint256 minAssetsOut);
}
"
    },
    "src/YoVault.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity 0.8.28;

import {Errors} from "./libraries/Errors.sol";
import {IYoVault} from "./interfaces/IYoVault.sol";

import {Compatible} from "./base/Compatible.sol";
import {AuthUpgradeable, Authority} from "./base/AuthUpgradeable.sol";

import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {ERC4626Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC4626Upgradeable.sol";
import {PausableUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol";

// __   __    ____            _                  _
// \ \ / /__ |  _ \ _ __ ___ | |_ ___   ___ ___ | |
//  \ V / _ \| |_) | '__/ _ \| __/ _ \ / __/ _ \| |
//   | | (_) |  __/| | | (_) | || (_) | (_| (_) | |
//   |_|\___/|_|   |_|  \___/ \__\___/ \___\___/|_|
/// @title yoVault - A simple vault contract that allows for an operator to manage the vault.
/// @dev This contract is based on the ERC4626 standard and uses the Auth contract for access control.
/// It provides an asynchronous redeem mechanism that allows users to request a redeem and the operator to fulfill it.
/// This would allow the operator to move funds to a different chain or strategy before the user can claim the assets.
/// If the vault has enough assets to fulfill the request, the assets are withdrawn and returned to the owner
/// immediately. Otherwise, the assets are transferred to the vault and the request is stored until the operator
/// fulfills it.

contract YoVault is ERC4626Upgradeable, Compatible, IYoVault, AuthUpgradeable, PausableUpgradeable {
    using Math for uint256;
    using Address for address;
    using SafeERC20 for IERC20;

    /// @dev Assume requests are non-fungible and all have ID = 0, so we can differentiate between a request ID and the
    /// assets amount.
    uint256 internal constant REQUEST_ID = 0;
    /// @dev The denominator used for precision calculations.
    uint256 internal constant DENOMINATOR = 1e18;
    /// @dev The maximum fee that can be set for the vault operations. 1e17 = 10%.
    uint256 internal constant MAX_FEE = 1e17;
    /// @dev The maximum percentage that can be set as a threshold for the percentage change. 1e17 = 10%
    uint256 internal constant MAX_PERCENTAGE_THRESHOLD = 1e17;

    /// @dev the aggregated underlying balances across all strategies/chains, reported by an oracle
    uint256 public aggregatedUnderlyingBalances;
    /// @dev the last block number when the aggregated underlying balances were updated
    uint256 public lastBlockUpdated;
    /// @dev the last price per share calculated after the aggregated underlying balances are reported
    uint256 public lastPricePerShare;
    /// @dev the total amount of assets that are pending redemption
    uint256 public totalPendingAssets;
    /// @dev the maximum percentage change allowed before the vault is paused. It can be updated by the owner.
    /// 1e18 = 100%. It's value depends on the frequency of the oracle updates.
    uint256 public maxPercentageChange;
    /// @dev the fee charged for the withdraws, it's a percentage of the assets redeemed
    uint256 public feeOnWithdraw;
    /// @dev the fee charged for the deposits, it's a percentage of the assets deposited
    uint256 public feeOnDeposit;
    /// @dev the address that receives the fees for the vault operations, if it's zero, no fees are charged
    address public feeRecipient;

    /// @dev used to store the amount of shares that are pending redemption, it must be fulfilled by the vault operator
    mapping(address user => PendingRedeem redeem) internal _pendingRedeem;

    //============================== CONSTRUCTOR ===============================

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() {
        _disableInitializers();
    }

    //============================== INITIALIZER ===============================
    function initialize(IERC20 _asset, address _owner, string memory _name, string memory _symbol) public initializer {
        __Context_init();
        __ERC20_init(_name, _symbol);
        __ERC4626_init(_asset);
        __Auth_init(_owner, Authority(address(0)));
        __Pausable_init();
        maxPercentageChange = 1e16; // 1%
    }

    // ========================================= PUBLIC FUNCTIONS =========================================

    /// @notice Allows the vault operator to manage the vault.
    /// @param target The target contract to make a call to.
    /// @param data The data to send to the target contract.
    /// @param value The amount of native assets to send with the call.
    function manage(
        address target,
        bytes calldata data,
        uint256 value
    ) external requiresAuth returns (bytes memory result) {
        bytes4 functionSig = bytes4(data);
        require(
            authority().canCall(msg.sender, target, functionSig),
            Errors.TargetMethodNotAuthorized(target, functionSig)
        );

        result = target.functionCallWithValue(data, value);
    }

    /// @notice Same as `manage` but allows for multiple calls in a single transaction.
    /// @param targets The target contracts to make calls to.
    /// @param data The data to send to the target contracts.
    /// @param values The amounts of native assets to send with the calls.
    function manage(
        address[] calldata targets,
        bytes[] calldata data,
        uint256[] calldata values
    ) external requiresAuth returns (bytes[] memory results) {
        uint256 targetsLength = targets.length;
        results = new bytes[](targetsLength);
        for (uint256 i; i < targetsLength; ++i) {
            bytes4 functionSig = bytes4(data[i]);
            require(
                authority().canCall(msg.sender, targets[i], functionSig),
                Errors.TargetMethodNotAuthorized(targets[i], functionSig)
            );
            results[i] = targets[i].functionCallWithValue(data[i], values[i]);
        }
    }

    /// @notice Pause the contract to prevent any further deposits, withdrawals, or transfers.
    function pause() public requiresAuth {
        _pause();
    }

    /// @notice Unpause the contract to allow deposits, withdrawals, and transfers.
    function unpause() public requiresAuth {
        _unpause();
    }

    /// @notice If the vault has enough assets to fulfill the request,
    /// withdraw the assets and return them to the owner.
    /// Otherwise, transfer the shares to the vault and store the request.
    /// The shares are burned when the request is fulfilled and the assets are transferred to the owner.
    /// @param shares The amount of shares to redeem.
    /// @param receiver The address of the receiver of the assets.
    /// @param owner The address of the owner.
    /// @return The ID of the request which is always 0 or the assets amount if the request is immediately
    /// processed.
    function requestRedeem(uint256 shares, address receiver, address owner) public whenNotPaused returns (uint256) {
        require(shares > 0, Errors.SharesAmountZero());
        require(owner == msg.sender, Errors.NotSharesOwner());
        require(balanceOf(owner) >= shares, Errors.InsufficientShares());

        uint256 assetsWithFee = super.previewRedeem(shares);

        // instant redeem if the vault has enough assets
        if (_getAvailableBalance() >= assetsWithFee) {
            _withdraw(owner, receiver, owner, assetsWithFee, shares);
            emit RedeemRequest(receiver, owner, assetsWithFee, shares, true);
            return assetsWithFee;
        }

        emit RedeemRequest(receiver, owner, assetsWithFee, shares, false);
        // transfer the shares to the vault and store the request
        _transfer(owner, address(this), shares);

        totalPendingAssets += assetsWithFee;
        PendingRedeem storage pending = _pendingRedeem[receiver];
        pending.shares += shares;
        pending.assets += assetsWithFee;

        return REQUEST_ID;
    }

    /// @notice The operator can fulfill a redeem request. Requires authorization.
    /// @param receiver The address of the receiver of the assets.
    /// @param shares The amount of shares to fulfil.
    /// @param assetsWithFee The amount of assets to fulfil including the fee.
    function fulfillRedeem(address receiver, uint256 shares, uint256 assetsWithFee) external requiresAuth {
        PendingRedeem storage pending = _pendingRedeem[receiver];
        require(pending.shares != 0 && shares <= pending.shares, Errors.InvalidSharesAmount());
        require(pending.assets != 0 && assetsWithFee <= pending.assets, Errors.InvalidAssetsAmount());

        pending.shares -= shares;
        pending.assets -= assetsWithFee;
        totalPendingAssets -= assetsWithFee;

        emit RequestFulfilled(receiver, shares, assetsWithFee);
        // burn the shares from the vault and transfer the assets to the receiver
        _withdraw(address(this), receiver, address(this), assetsWithFee, shares);
    }

    /// @notice The operator can cancel a redeem request in case of an black swan event.
    /// @param receiver The address of the receiver of the assets.
    /// @param shares The amount of shares to cancel.
    /// @param assetsWithFee The amount of assets to cancel including the fee.
    function cancelRedeem(address receiver, uint256 shares, uint256 assetsWithFee) external requiresAuth {
        PendingRedeem storage pending = _pendingRedeem[receiver];
        require(pending.shares != 0 && shares <= pending.shares, Errors.InvalidSharesAmount());
        require(pending.assets != 0 && assetsWithFee <= pending.assets, Errors.InvalidAssetsAmount());

        pending.shares -= shares;
        pending.assets -= assetsWithFee;
        totalPendingAssets -= assetsWithFee;

        emit RequestCancelled(receiver, shares, assetsWithFee);
        // transfer the shares back to the owner
        _transfer(address(this), receiver, shares);
    }

    /// @notice The oracle can update the aggregated underlying balances across all strategies/chains.
    /// @dev Can be called only once per block to prevent oracle abuse and flash loan attacks.
    /// @param newAggregatedBalance The new aggregated underlying balances.
    function onUnderlyingBalanceUpdate(uint256 newAggregatedBalance) external virtual requiresAuth {
        require(block.number > lastBlockUpdated, Errors.UpdateAlreadyCompletedInThisBlock());

        /// @dev the price per share is calculated taking into account the new aggregated underlying balances
        uint256 newPricePerShare = _totalAssets(newAggregatedBalance).mulDiv(DENOMINATOR, totalSupply());
        uint256 percentageChange = _calculatePercentageChange(lastPricePerShare, newPricePerShare);

        /// @dev Pause the vault if the percentage change is greater than the threshold (works in both directions)
        if (percentageChange > maxPercentageChange) {
            _pause();
            return;
        }

        emit UnderlyingBalanceUpdated(aggregatedUnderlyingBalances, newAggregatedBalance);
        aggregatedUnderlyingBalances = newAggregatedBalance;

        lastPricePerShare = newPricePerShare;
        lastBlockUpdated = block.number;
    }

    /// @notice Update the maximum percentage change allowed before the vault is paused.
    /// @param newMaxPercentageChange The new maximum percentage change. Max value is 1e17 (10%).
    function updateMaxPercentageChange(uint256 newMaxPercentageChange) external requiresAuth {
        require(newMaxPercentageChange < MAX_PERCENTAGE_THRESHOLD, Errors.InvalidMaxPercentage());
        emit MaxPercentageUpdated(maxPercentageChange, newMaxPercentageChange);
        maxPercentageChange = newMaxPercentageChange;
    }

    /// @notice Update the fee charged for the vault operations.
    /// @param newFee The new fee charged for the vault operations.
    function updateWithdrawFee(uint256 newFee) external requiresAuth {
        require(newFee < MAX_FEE, Errors.InvalidFee());
        emit WithdrawFeeUpdated(feeOnWithdraw, newFee);
        feeOnWithdraw = newFee;
    }

    /// @notice Update the fee charged for the vault operations.
    /// @param newFee The new fee charged for the vault operations.
    function updateDepositFee(uint256 newFee) external requiresAuth {
        require(newFee < MAX_FEE, Errors.InvalidFee());
        emit DepositFeeUpdated(feeOnDeposit, newFee);
        feeOnDeposit = newFee;
    }

    /// @notice Update the address that receives the fees for the vault operations.
    /// @param newFeeRecipient The new address that receives the fees for the vault operations.
    function updateFeeRecipient(address newFeeRecipient) external requiresAuth {
        emit FeeRecipientUpdated(feeRecipient, newFeeRecipient);
        feeRecipient = newFeeRecipient;
    }

    //============================== VIEW FUNCTIONS ===============================

    /// @notice Get the amount of assets and shares that are pending redemption.
    /// @param user The address of the user.
    function pendingRedeemRequest(address user) public view returns (uint256 assets, uint256 pendingShares) {
        return (_pendingRedeem[user].assets, _pendingRedeem[user].shares);
    }

    //============================== OVERRIDES ===============================

    /// @notice Override the default `totalAssets` function to return the total assets held by the vault and the
    /// aggregated underlying balances across all strategies/chains.
    function totalAssets() public view override returns (uint256) {
        return _totalAssets(aggregatedUnderlyingBalances);
    }

    /// @dev Override the default `deposit` function to add the `whenNotPaused` modifier.
    function deposit(uint256 assets, address receiver) public override whenNotPaused returns (uint256) {
        return super.deposit(assets, receiver);
    }

    /// @dev Override the default `mint` function to add the `whenNotPaused` modifier.
    function mint(uint256 shares, address receiver) public override whenNotPaused returns (uint256) {
        return super.mint(shares, receiver);
    }

    /// @notice This method is disabled. Use `requestRedeem` or `redeem`instead.
    function withdraw(uint256, address, address) public override whenNotPaused returns (uint256) {
        revert Errors.UseRequestRedeem();
    }

    function redeem(uint256 shares, address receiver, address owner) public override whenNotPaused returns (uint256) {
        return requestRedeem(shares, receiver, owner);
    }

    /// @dev Override the default `_update` function to add the `whenNotPaused` modifier.
    /// The _update function is called on all transfers, mints and burns.
    function _update(address from, address to, uint256 value) internal override whenNotPaused {
        super._update(from, to, value);
    }

    /// @dev Preview taking an entry fee on deposit. See {IERC4626-previewDeposit}.
    function previewDeposit(uint256 assets) public view virtual override returns (uint256) {
        uint256 fee = _feeOnTotal(assets, feeOnDeposit);
        return super.previewDeposit(assets - fee);
    }

    /// @dev Preview adding an entry fee on mint. See {IERC4626-previewMint}.
    function previewMint(uint256 shares) public view virtual override returns (uint256) {
        uint256 assets = super.previewMint(shares);
        return assets + _feeOnRaw(assets, feeOnDeposit);
    }

    /// @dev Preview adding an exit fee on withdraw. See {IERC4626-previewWithdraw}.
    function previewWithdraw(uint256 assets) public view virtual override returns (uint256) {
        uint256 fee = _feeOnRaw(assets, feeOnWithdraw);
        return super.previewWithdraw(assets + fee);
    }

    /// @dev Preview taking an exit fee on redeem. See {IERC4626-previewRedeem}.
    function previewRedeem(uint256 shares) public view virtual override returns (uint256) {
        uint256 assets = super.previewRedeem(shares);
        return assets - _feeOnTotal(assets, feeOnWithdraw);
    }

    function maxDeposit(address receiver) public view virtual override returns (uint256) {
        if (paused()) {
            return 0;
        }
        return super.maxDeposit(receiver);
    }

    function maxMint(address receiver) public view virtual override returns (uint256) {
        if (paused()) {
            return 0;
        }
        return super.maxMint(receiver);
    }

    function maxWithdraw(address owner) public view virtual override returns (uint256) {
        if (paused()) {
            return 0;
        }
        return super.maxWithdraw(owner);
    }

    function maxRedeem(address owner) public view virtual override returns (uint256) {
        if (paused()) {
            return 0;
        }
        return super.maxRedeem(owner);
    }

    /// @dev Account for the fee charged for the vault operations if the fee recipient and fee are set.
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assetsWithFee,
        uint256 shares
    ) internal override {
        uint256 feeAmount = _feeOnTotal(assetsWithFee, feeOnWithdraw);
        uint256 assets = assetsWithFee - feeAmount;
        address recipient = feeRecipient;

        super._withdraw(caller, receiver, owner, assets, shares);

        if (feeAmount > 0 && recipient != address(0)) {
            IERC20(asset()).safeTransfer(recipient, feeAmount);
        }
    }

    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal override {
        uint256 feeAmount = _feeOnTotal(assets, feeOnDeposit);
        address recipient = feeRecipient;

        super._deposit(caller, receiver, assets, shares);

        if (feeAmount > 0 && recipient != address(0)) {
            IERC20(asset()).safeTransfer(recipient, feeAmount);
        }
    }

    function _totalAssets(uint256 _underlyingBalances) internal view returns (uint256) {
        return IERC20(asset()).balanceOf(address(this)) + _underlyingBalances;
    }

    //============================== PRIVATE FUNCTIONS ===============================

    /// @dev Used to calculate the percentage change between two prices. 1e18 = 100%.
    /// @param oldPrice The old price.
    /// @param newPrice The new price.
    /// @return The percentage change. 1e18 = 100%.
    function _calculatePercentageChange(uint256 oldPrice, uint256 newPrice) internal pure returns (uint256) {
        if (oldPrice == 0) {
            return 0;
        }
        uint256 diff = newPrice > oldPrice ? newPrice - oldPrice : oldPrice - newPrice;
        return diff.mulDiv(DENOMINATOR, oldPrice, Math.Rounding.Ceil);
    }

    /// @dev Calculates the fees that should be added to an amount `assets` that does not already include fees.
    /// Used in {IERC4626-mint} and {IERC4626-withdraw} operations.
    function _feeOnRaw(uint256 assets, uint256 feeBasisPoints) private pure returns (uint256) {
        return assets.mulDiv(feeBasisPoints, DENOMINATOR, Math.Rounding.Ceil);
    }

    /// @dev Calculates the fee part of an amount `assets` that already includes fees.
    /// Used in {IERC4626-deposit} and {IERC4626-redeem} operations.
    function _feeOnTotal(uint256 assets, uint256 feeBasisPoints) private pure returns (uint256) {
        return assets.mulDiv(feeBasisPoints, feeBasisPoints + DENOMINATOR, Math.Rounding.Ceil);
    }

    /// @dev The available balance is the balance of the vault minus the total pending assets.
    /// @return The available balance.
    function _getAvailableBalance() internal view returns (uint256) {
        uint256 balance = IERC20(asset()).balanceOf(address(this));
        return balance > totalPendingAssets ? balance - totalPendingAssets : 0;
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/Panic.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)

pragma solidity ^0.8.20;

/**
 * @dev Helper library for emitting standardized panic codes.
 *
 * ```solidity
 * contract Example {
 *      using Panic for uint256;
 *
 *      // Use any of the declared internal constants
 *      function foo() { Panic.GENERIC.panic(); }
 *
 *      // Alternatively
 *      function foo() { Panic.panic(Panic.GENERIC); }
 * }
 * ```
 *
 * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
 *
 * _Available since v5.1._
 */
// slither-disable-next-line unused-state
library Panic {
    /// @dev generic / unspecified error
    uint256 internal constant GENERIC = 0x00;
    /// @dev used by the assert() builtin
    uint256 internal constant ASSERT = 0x01;
    /// @dev arithmetic underflow or overflow
    uint256 internal constant UNDER_OVERFLOW = 0x11;
    /// @dev division or modulo by zero
    uint256 internal constant DIVISION_BY_ZERO = 0x12;
    /// @dev enum conversion error
    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
    /// @dev invalid encoding in storage
    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
    /// @dev empty array pop
    uint256 internal constant EMPTY_ARRAY_POP = 0x31;
    /// @dev array out of bounds access
    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
    /// @dev resource error (too large allocation or too large array)
    uint256 internal constant RESOURCE_ERROR = 0x41;
    /// @dev calling invalid internal function
    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;

    /// @dev Reverts with a panic code. Recommended to use with
    /// the internal constants with predefined codes.
    function panic(uint256 code) internal pure {
        assembly ("memory-safe") {
            mstore(0x00, 0x4e487b71)
            mstore(0x20, code)
            revert(0x1c, 0x24)
        }
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/math/SafeCast.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is great