PhalaClaimer

{{
  "language": "Solidity",
  "sources": {
    "src/PhalaClaimer.sol": {
      "content": "// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;

import {KhalaClaimer} from "./KhalaClaimer.sol";
import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";
import {IERC4626} from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

/**
 * @title IL1StandardBridge
 * @notice Interface for L1 bridge contracts (Optimism, Base, OP Stack chains)
 * @dev Used by Superbridge and native rollup bridges
 */
interface IL1StandardBridge {
    /**
     * @notice Deposit an amount of ERC20 to a recipient's balance on L2
     * @param _l1Token Address of the L1 ERC20 token
     * @param _l2Token Address of the corresponding L2 ERC20 token
     * @param _to L2 address to credit the withdrawal to
     * @param _amount Amount of the ERC20 to deposit
     * @param _minGasLimit Minimum gas limit for the deposit message on L2
     * @param _extraData Optional data to forward to L2
     */
    function depositERC20To(
        address _l1Token,
        address _l2Token,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) external;
}

/**
 * @title PhalaClaimer
 * @notice Extends KhalaClaimer to bridge staked tokens to L2 instead of transferring on L1
 * @dev Inherits from KhalaClaimer and overrides claim logic to support L2 bridging
 *
 * Key differences from KhalaClaimer:
 * - Free tokens: Still transferred on L1 (same as parent)
 * - Staked tokens: Bridged to L2 via L1StandardBridge (instead of L1 transfer)
 * - Supports separate L1/L2 receiver addresses
 * - Backward compatible with single receiver address
 */
contract PhalaClaimer is KhalaClaimer {
    using SafeERC20 for IERC20;
    using SafeERC20 for IERC4626;

    // Bridge configuration
    IL1StandardBridge private _l1Bridge;
    address private _l2Token;
    uint32 private _minGasLimit;

    event ClaimedAndBridged(address indexed user, uint256 free, uint256 staked, address l1Receiver, address l2Receiver);
    event BridgeConfigUpdated(address indexed l1Bridge, address indexed l2Token, uint32 minGasLimit);

    error InvalidBridgeConfig();

    /**
     * @notice Initialize PhalaClaimer with bridge configuration
     * @param asset The asset token (PHA)
     * @param vault The vault contract
     * @param owner The contract owner
     * @param signer The authorized signer
     * @param l1Bridge L1StandardBridge contract address
     * @param l2Token L2 vault token address
     * @param minGasLimit Minimum gas limit for L2 execution
     */
    function initialize(
        IERC20 asset,
        IERC4626 vault,
        address owner,
        address signer,
        address l1Bridge,
        address l2Token,
        uint32 minGasLimit
    ) public initializer {
        // Call parent initializer
        KhalaClaimer.initialize(asset, vault, owner, signer);

        // Set bridge configuration
        setBridgeConfig(l1Bridge, l2Token, minGasLimit);
    }

    /**
     * @notice Set or update bridge configuration
     * @param l1Bridge L1StandardBridge contract address
     * @param l2Token L2 vault token address
     * @param minGasLimit Minimum gas limit for L2 execution
     */
    function setBridgeConfig(address l1Bridge, address l2Token, uint32 minGasLimit) public onlyOwner {
        require(l1Bridge != address(0), InvalidBridgeConfig());
        require(l2Token != address(0), InvalidBridgeConfig());
        _l1Bridge = IL1StandardBridge(l1Bridge);
        _l2Token = l2Token;
        _minGasLimit = minGasLimit;
        emit BridgeConfigUpdated(l1Bridge, l2Token, minGasLimit);
    }

    /**
     * @notice Get current bridge configuration
     * @return l1Bridge L1StandardBridge address
     * @return l2Token L2 vault token address
     * @return minGasLimit Minimum gas limit
     */
    function bridgeConfig() public view returns (address l1Bridge, address l2Token, uint32 minGasLimit) {
        return (address(_l1Bridge), _l2Token, _minGasLimit);
    }

    /**
     * @notice Override parent _claim to support L2 bridging
     * @dev This version bridges staked tokens to L2 instead of transferring on L1
     * @param user The user claiming
     * @param free Amount of free tokens (transferred on L1)
     * @param staked Amount of staked tokens (bridged to L2)
     * @param l1Receiver Address to receive free tokens on L1
     * @param l2Receiver Address to receive staked tokens on L2
     */
    function _claimWithBridge(
        address user,
        uint256 free,
        uint256 staked,
        address l1Receiver,
        address l2Receiver
    ) internal {
        require(_deposited, NotDeposited());
        require(l1Receiver != address(0), InvalidReceiver(l1Receiver));
        require(l2Receiver != address(0), InvalidReceiver(l2Receiver));
        require(!claimed(user), AlreadyClaimed(user));
        require(free > 0 || staked > 0, NoAssetsToClaim(user));

        // Transfer free tokens directly on L1 (same as parent)
        if (free > 0) {
            _asset.safeTransfer(l1Receiver, free);
        }

        // Bridge staked tokens (vault shares) to L2 (different from parent)
        if (staked > 0) {
            // Approve bridge to spend vault shares
            _vault.safeIncreaseAllowance(address(_l1Bridge), staked);

            // Bridge vault shares to L2
            _l1Bridge.depositERC20To(
                address(_vault),  // L1 vault token address
                _l2Token,         // L2 vault token address
                l2Receiver,       // Recipient on L2
                staked,           // Amount of vault shares
                _minGasLimit,     // Min gas limit for L2 execution
                ""                // Extra data (empty)
            );
        }

        _claimed[user] = true;
        emit ClaimedAndBridged(user, free, staked, l1Receiver, l2Receiver);
    }

    /**
     * @notice Override parent _claim to use same address for L1 and L2
     * @dev Maintains backward compatibility with parent contract interface
     */
    function _claim(address user, uint256 free, uint256 staked, address receiver) internal virtual override {
        _claimWithBridge(user, free, staked, receiver, receiver);
    }

    /**
     * @notice Admin claim with separate L1/L2 receivers
     * @param user The user claiming
     * @param free Amount of free tokens
     * @param staked Amount of staked tokens
     * @param l1Receiver L1 receiver address
     * @param l2Receiver L2 receiver address
     */
    function adminClaim(
        address user,
        uint256 free,
        uint256 staked,
        address l1Receiver,
        address l2Receiver
    ) public onlyOwner {
        _claimWithBridge(user, free, staked, l1Receiver, l2Receiver);
    }

    /**
     * @notice User claim with signature verification and separate L1/L2 receivers
     * @param user The user claiming
     * @param free Amount of free tokens
     * @param staked Amount of staked tokens
     * @param l1Receiver L1 receiver address
     * @param l2Receiver L2 receiver address
     * @param signature Signature from the authorized signer
     */
    function claim(
        address user,
        uint256 free,
        uint256 staked,
        address l1Receiver,
        address l2Receiver,
        bytes memory signature
    ) public {
        string memory prefix = "Claim Phala Asset";
        bytes32 message = keccak256(abi.encode(prefix, user, free, staked, l1Receiver, l2Receiver));
        require(_verify(message, signature, _signer), InvalidSignature());

        _claimWithBridge(user, free, staked, l1Receiver, l2Receiver);
    }

    /**
     * @notice Backward compatible claim function (uses same address for L1 and L2)
     * @dev Overloaded function that calls the parent's claim logic
     * @param user The user claiming
     * @param free Amount of free tokens
     * @param staked Amount of staked tokens
     * @param receiver Receiver address for both L1 and L2
     * @param signature Signature from the authorized signer
     */
    function claim(
        address user,
        uint256 free,
        uint256 staked,
        address receiver,
        bytes memory signature
    ) public override {
        claim(user, free, staked, receiver, receiver, signature);
    }
}
"
    },
    "src/KhalaClaimer.sol": {
      "content": "// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;

import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";
import {IERC4626} from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";

contract KhalaClaimer is Initializable, OwnableUpgradeable {
    using ECDSA for bytes32;
    using MessageHashUtils for bytes32;

    IERC20 internal _asset;
    IERC4626 internal _vault;
    address internal _signer;
    bool internal _deposited;

    mapping(address => bool) internal _claimed;

    event Deposited(uint256 free, uint256 staked);
    event Claimed(address indexed user, uint256 free, uint256 staked, address receiver);
    event SignerSet(address indexed signer);

    error AlreadyDeposited();
    error AlreadyClaimed(address user);
    error NoAssetsToClaim(address user);
    error InvalidSignature();
    error InvalidReceiver(address receiver);
    error NotDeposited();

    function initialize(IERC20 asset, IERC4626 vault, address owner, address signer) public initializer {
        __Ownable_init(owner);
        _asset = asset;
        _vault = vault;
        setSigner(signer);
    }

    function setSigner(address signer) public onlyOwner {
        _signer = signer;
        emit SignerSet(signer);
    }

    function deposit(uint256 free, uint256 staked) public onlyOwner {
        require(!_deposited, AlreadyDeposited());
        SafeERC20.safeTransferFrom(_asset, _msgSender(), address(this), free + staked);
        _asset.approve(address(_vault), staked);
        _vault.deposit(staked, address(this));
        _deposited = true;
        emit Deposited(free, staked);
    }

    function claimed(address user) public view returns (bool) {
        return _claimed[user];
    }

    function _verify(bytes32 message, bytes memory signature, address signer) internal pure returns (bool) {
        return message.toEthSignedMessageHash().recover(signature) == signer;
    }

    function _claim(address user, uint256 free, uint256 staked, address receiver) internal virtual {
        require(_deposited, NotDeposited());
        require(receiver != address(0), InvalidReceiver(receiver));
        require(!claimed(user), AlreadyClaimed(user));
        require(free > 0 || staked > 0, NoAssetsToClaim(user));

        if (free > 0) {
            SafeERC20.safeTransfer(_asset, receiver, free);
        }
        if (staked > 0) {
            // 1 shares = 1 token when vault has no rewards
            SafeERC20.safeTransfer(_vault, receiver, staked);
        }
        _claimed[user] = true;
        emit Claimed(user, free, staked, receiver);
    }

    function adminClaim(address user, uint256 free, uint256 staked, address receiver) public onlyOwner {
        _claim(user, free, staked, receiver);
    }

    function claim(address user, uint256 free, uint256 staked, address receiver, bytes memory signature) public virtual {
        string memory prefix = "Claim Khala Asset";
        bytes32 message = keccak256(abi.encode(prefix, user, free, staked, receiver));
        require(_verify(message, signature, _signer), InvalidSignature());

        _claim(user, free, staked, receiver);
    }
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)

pragma solidity >=0.4.16;

import {IERC20} from "../token/ERC20/IERC20.sol";
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC4626.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC4626.sol)

pragma solidity >=0.6.2;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC-4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Deposit `assets` underlying tokens and send the corresponding number of vault shares (`shares`) to `receiver`.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly `shares` vault shares to `receiver` in exchange for `assets` underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        if (!_safeTransfer(token, to, value, true)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        if (!_safeTransferFrom(token, from, to, value, true)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _safeTransfer(token, to, value, false);
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _safeTransferFrom(token, from, to, value, false);
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        if (!_safeApprove(token, spender, value, false)) {
            if (!_safeApprove(token, spender, 0, true)) revert SafeERC20FailedOperation(address(token));
            if (!_safeApprove(token, spender, value, true)) revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Oppositely, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity `token.transfer(to, value)` call, relaxing the requirement on the return value: the
     * return value is optional (but if data is returned, it must not be false).
     *
     * @param token The token targeted by the call.
     * @param to The recipient of the tokens
     * @param value The amount of token to transfer
     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.
     */
    function _safeTransfer(IERC20 token, address to, uint256 value, bool bubble) private returns (bool success) {
        bytes4 selector = IERC20.transfer.selector;

        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(0x00, selector)
            mstore(0x04, and(to, shr(96, not(0))))
            mstore(0x24, value)
            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)
            // if call success and return is true, all is good.
            // otherwise (not success or return is not true), we need to perform further checks
            if iszero(and(success, eq(mload(0x00), 1))) {
                // if the call was a failure and bubble is enabled, bubble the error
                if and(iszero(success), bubble) {
                    returndatacopy(fmp, 0x00, returndatasize())
                    revert(fmp, returndatasize())
                }
                // if the return value is not true, then the call is only successful if:
                // - the token address has code
                // - the returndata is empty
                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))
            }
            mstore(0x40, fmp)
        }
    }

    /**
     * @dev Imitates a Solidity `token.transferFrom(from, to, value)` call, relaxing the requirement on the return
     * value: the return value is optional (but if data is returned, it must not be false).
     *
     * @param token The token targeted by the call.
     * @param from The sender of the tokens
     * @param to The recipient of the tokens
     * @param value The amount of token to transfer
     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.
     */
    function _safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value,
        bool bubble
    ) private returns (bool success) {
        bytes4 selector = IERC20.transferFrom.selector;

        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(0x00, selector)
            mstore(0x04, and(from, shr(96, not(0))))
            mstore(0x24, and(to, shr(96, not(0))))
            mstore(0x44, value)
            success := call(gas(), token, 0, 0x00, 0x64, 0x00, 0x20)
            // if call success and return is true, all is good.
            // otherwise (not success or return is not true), we need to perform further checks
            if iszero(and(success, eq(mload(0x00), 1))) {
                // if the call was a failure and bubble is enabled, bubble the error
                if and(iszero(success), bubble) {
                    returndatacopy(fmp, 0x00, returndatasize())
                    revert(fmp, returndatasize())
                }
                // if the return value is not true, then the call is only successful if:
                // - the token address has code
                // - the returndata is empty
                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))
            }
            mstore(0x40, fmp)
            mstore(0x60, 0)
        }
    }

    /**
     * @dev Imitates a Solidity `token.approve(spender, value)` call, relaxing the requirement on the return value:
     * the return value is optional (but if data is returned, it must not be false).
     *
     * @param token The token targeted by the call.
     * @param spender The spender of the tokens
     * @param value The amount of token to transfer
     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.
     */
    function _safeApprove(IERC20 token, address spender, uint256 value, bool bubble) private returns (bool success) {
        bytes4 selector = IERC20.approve.selector;

        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(0x00, selector)
            mstore(0x04, and(spender, shr(96, not(0))))
            mstore(0x24, value)
            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)
            // if call success and return is true, all is good.
            // otherwise (not success or return is not true), we need to perform further checks
            if iszero(and(success, eq(mload(0x00), 1))) {
                // if the call was a failure and bubble is enabled, bubble the error
                if and(iszero(success), bubble) {
                    returndatacopy(fmp, 0x00, returndatasize())
                    revert(fmp, returndatasize())
                }
                // if the return value is not true, then the call is only successful if:
                // - the token address has code
                // - the returndata is empty
                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))
            }
            mstore(0x40, fmp)
        }
    }
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/cryptography/ECDSA.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction
     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash
     * invalidation or nonces for replay protection.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     *
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(
        bytes32 hash,
        bytes memory signature
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly ("memory-safe") {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Variant of {tryRecover} that takes a signature in calldata
     */
    function tryRecoverCalldata(
        bytes32 hash,
        bytes calldata signature
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, calldata slices would work here, but are
            // significantly more expensive (length check) than using calldataload in assembly.
            assembly ("memory-safe") {
                r := calldataload(signature.offset)
                s := calldataload(add(signature.offset, 0x20))
                v := byte(0, calldataload(add(signature.offset, 0x40)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction
     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash
     * invalidation or nonces for replay protection.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Variant of {recover} that takes a signature in calldata
     */
    function recoverCalldata(bytes32 hash, bytes calldata signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecoverCalldata(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Parse a signature into its `v`, `r` and `s` components. Supports 65-byte and 64-byte (ERC-2098)
     * formats. Returns (0,0,0) for invalid signatures.
     *
     * For 64-byte signatures, `v` is automatically normalized to 27 or 28.
     * For 65-byte signatures, `v` is returned as-is and MUST already be 27 or 28 for use with ecrecover.
     *
     * Consider validating the result before use, or use {tryRecover}/{recover} which perform full validation.
     */
    function parse(bytes memory signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {
        assembly ("memory-safe") {
            // Check the signature length
            switch mload(signature)
            // - case 65: r,s,v signature (standard)
            case 65 {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)
            case 64 {
                let vs := mload(add(signature, 0x40))
                r := mload(add(signature, 0x20))
                s := and(vs, shr(1, not(0)))
                v := add(shr(255, vs), 27)
            }
            default {
                r := 0
                s := 0
                v := 0
            }
        }
    }

    /**
     * @dev Variant of {parse} that takes a signature in calldata
     */
    function parseCalldata(bytes calldata signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {
        assembly ("memory-safe") {
            // Check the signature length
            switch signature.length
            // - case 65: r,s,v signature (standard)
            case 65 {
                r := calldataload(signature.offset)
                s := calldataload(add(signature.offset, 0x20))
                v := byte(0, calldataload(add(signature.offset, 0x40)))
            }
            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)
            case 64 {
                let vs := calldataload(add(signature.offset, 0x20))
                r := calldataload(signature.offset)
                s := and(vs, shr(1, not(0)))
                v := add(shr(255, vs), 27)
            }
            default {
                r := 0
                s := 0
                v := 0
            }
        }
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/cryptography/MessageHashUtils.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.24;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[ERC-191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\
32"` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, "\x19Ethereum Signed Message:\
32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\
" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\
", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Variant of {toDataWithIntendedValidatorHash-address-bytes} optimized for cases where `data` is a bytes32.
     */
    function toDataWithIntendedValidatorHash(
        address validator,
        bytes32 messageHash
    ) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, hex"19_00")
            mstore(0x02, shl(96, validator))
            mstore(0x16, messageHash)
            digest := keccak256(0x00, 0x36)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (ERC-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/contracts/access/OwnableUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "@openzeppelin/contracts/proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity >=0.6.2;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
"
    },
    "lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC1363.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)

pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))