TokenTransferor

{{
  "language": "Solidity",
  "sources": {
    "@chainlink/contracts-ccip/contracts/interfaces/IRouterClient.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import {Client} from "../libraries/Client.sol";

interface IRouterClient {
  error UnsupportedDestinationChain(uint64 destChainSelector);
  error InsufficientFeeTokenAmount();
  error InvalidMsgValue();

  /// @notice Checks if the given chain ID is supported for sending/receiving.
  /// @param destChainSelector The chain to check.
  /// @return supported is true if it is supported, false if not.
  function isChainSupported(
    uint64 destChainSelector
  ) external view returns (bool supported);

  /// @param destinationChainSelector The destination chainSelector.
  /// @param message The cross-chain CCIP message including data and/or tokens.
  /// @return fee returns execution fee for the message.
  /// delivery to destination chain, denominated in the feeToken specified in the message.
  /// @dev Reverts with appropriate reason upon invalid message.
  function getFee(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage memory message
  ) external view returns (uint256 fee);

  /// @notice Request a message to be sent to the destination chain.
  /// @param destinationChainSelector The destination chain ID.
  /// @param message The cross-chain CCIP message including data and/or tokens.
  /// @return messageId The message ID.
  /// @dev Note if msg.value is larger than the required fee (from getFee) we accept.
  /// the overpayment with no refund.
  /// @dev Reverts with appropriate reason upon invalid message.
  function ccipSend(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external payable returns (bytes32);
}
"
    },
    "@chainlink/contracts-ccip/contracts/libraries/Client.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

// End consumer library.
library Client {
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct EVMTokenAmount {
    address token; // token address on the local chain.
    uint256 amount; // Amount of tokens.
  }

  struct Any2EVMMessage {
    bytes32 messageId; // MessageId corresponding to ccipSend on source.
    uint64 sourceChainSelector; // Source chain selector.
    bytes sender; // abi.decode(sender) if coming from an EVM chain.
    bytes data; // payload sent in original message.
    EVMTokenAmount[] destTokenAmounts; // Tokens and their amounts in their destination chain representation.
  }

  // If extraArgs is empty bytes, the default is 200k gas limit.
  struct EVM2AnyMessage {
    bytes receiver; // abi.encode(receiver address) for dest EVM chains.
    bytes data; // Data payload.
    EVMTokenAmount[] tokenAmounts; // Token transfers.
    address feeToken; // Address of feeToken. address(0) means you will send msg.value.
    bytes extraArgs; // Populate this with _argsToBytes(EVMExtraArgsV2).
  }

  // Tag to indicate only a gas limit. Only usable for EVM as destination chain.
  bytes4 public constant EVM_EXTRA_ARGS_V1_TAG = 0x97a657c9;

  struct EVMExtraArgsV1 {
    uint256 gasLimit;
  }

  function _argsToBytes(
    EVMExtraArgsV1 memory extraArgs
  ) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V1_TAG, extraArgs);
  }

  // Tag to indicate a gas limit (or dest chain equivalent processing units) and Out Of Order Execution. This tag is
  // available for multiple chain families. If there is no chain family specific tag, this is the default available
  // for a chain.
  // Note: not available for Solana VM based chains.
  bytes4 public constant GENERIC_EXTRA_ARGS_V2_TAG = 0x181dcf10;

  /// @param gasLimit: gas limit for the callback on the destination chain.
  /// @param allowOutOfOrderExecution: if true, it indicates that the message can be executed in any order relative to
  /// other messages from the same sender. This value's default varies by chain. On some chains, a particular value is
  /// enforced, meaning if the expected value is not set, the message request will revert.
  /// @dev Fully compatible with the previously existing EVMExtraArgsV2.
  struct GenericExtraArgsV2 {
    uint256 gasLimit;
    bool allowOutOfOrderExecution;
  }

  // Extra args tag for chains that use the Sui VM.
  bytes4 public constant SUI_EXTRA_ARGS_V1_TAG = 0x21ea4ca9;

  // Extra args tag for chains that use the Solana VM.
  bytes4 public constant SVM_EXTRA_ARGS_V1_TAG = 0x1f3b3aba;

  struct SVMExtraArgsV1 {
    uint32 computeUnits;
    uint64 accountIsWritableBitmap;
    bool allowOutOfOrderExecution;
    bytes32 tokenReceiver;
    // Additional accounts needed for execution of CCIP receiver. Must be empty if message.receiver is zero.
    // Token transfer related accounts are specified in the token pool lookup table on SVM.
    bytes32[] accounts;
  }

  /// @dev The maximum number of accounts that can be passed in SVMExtraArgs.
  uint256 public constant SVM_EXTRA_ARGS_MAX_ACCOUNTS = 64;

  /// @dev The expected static payload size of a token transfer when Borsh encoded and submitted to SVM.
  /// TokenPool extra data and offchain data sizes are dynamic, and should be accounted for separately.
  uint256 public constant SVM_TOKEN_TRANSFER_DATA_OVERHEAD = (4 + 32) // source_pool
    + 32 // token_address
    + 4 // gas_amount
    + 4 // extra_data overhead
    + 32 // amount
    + 32 // size of the token lookup table account
    + 32 // token-related accounts in the lookup table, over-estimated to 32, typically between 11 - 13
    + 32 // token account belonging to the token receiver, e.g ATA, not included in the token lookup table
    + 32 // per-chain token pool config, not included in the token lookup table
    + 32 // per-chain token billing config, not always included in the token lookup table
    + 32; // OffRamp pool signer PDA, not included in the token lookup table

  /// @dev Number of overhead accounts needed for message execution on SVM.
  /// @dev These are message.receiver, and the OffRamp Signer PDA specific to the receiver.
  uint256 public constant SVM_MESSAGING_ACCOUNTS_OVERHEAD = 2;

  /// @dev The size of each SVM account address in bytes.
  uint256 public constant SVM_ACCOUNT_BYTE_SIZE = 32;

  struct SuiExtraArgsV1 {
    uint256 gasLimit;
    bool allowOutOfOrderExecution;
    bytes32 tokenReceiver;
    bytes32[] receiverObjectIds;
  }

  /// @dev The expected static payload size of a token transfer when Borsh encoded and submitted to SUI.
  /// TokenPool extra data and offchain data sizes are dynamic, and should be accounted for separately.
  uint256 public constant SUI_TOKEN_TRANSFER_DATA_OVERHEAD = (4 + 32) // source_pool
    + 32 // token_address
    + 4 // gas_amount
    + 4 // extra_data overhead
    + 32 // amount
    + 32 // size of the token lookup table account
    + 32 // token-related accounts in the lookup table, over-estimated to 32, typically between 11 - 13
    + 32 // token account belonging to the token receiver, e.g ATA, not included in the token lookup table
    + 32 // per-chain token pool config, not included in the token lookup table
    + 32; // per-chain token billing config, not always included in the token lookup table

  /// @dev Number of overhead accounts needed for message execution on SUI.
  /// @dev This is the message.receiver.
  uint256 public constant SUI_MESSAGING_ACCOUNTS_OVERHEAD = 1;

  /// @dev The maximum number of receiver object ids that can be passed in SuiExtraArgs.
  uint256 public constant SUI_EXTRA_ARGS_MAX_RECEIVER_OBJECT_IDS = 64;

  /// @dev The size of each SUI account address in bytes.
  uint256 public constant SUI_ACCOUNT_BYTE_SIZE = 32;

  function _argsToBytes(
    GenericExtraArgsV2 memory extraArgs
  ) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(GENERIC_EXTRA_ARGS_V2_TAG, extraArgs);
  }

  function _svmArgsToBytes(
    SVMExtraArgsV1 memory extraArgs
  ) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(SVM_EXTRA_ARGS_V1_TAG, extraArgs);
  }

  function _suiArgsToBytes(
    SuiExtraArgsV1 memory extraArgs
  ) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(SUI_EXTRA_ARGS_V1_TAG, extraArgs);
  }

  /// @notice The CCV struct is used to represent a cross-chain verifier.
  struct CCV {
    /// @param The ccvAddress is the address of the verifier contract on the source chain
    address ccvAddress;
    /// @param args The args are the arguments that the verifier contract expects. They are opaque to CCIP and are only
    /// used in the CCV.
    bytes args;
  }

  bytes4 public constant GENERIC_EXTRA_ARGS_V3_TAG = 0x302326cb;

  struct EVMExtraArgsV3 {
    CCV[] requiredCCV;
    CCV[] optionalCCV;
    uint8 optionalThreshold;
    /// @notice The finality config, 0 means the default finality that the CCV considers final. Any non-zero value means
    /// a block depth.
    uint16 finalityConfig;
    address executor;
    bytes executorArgs;
    bytes tokenArgs;
  }

  function _argsToBytes(
    EVMExtraArgsV3 memory extraArgs
  ) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(GENERIC_EXTRA_ARGS_V3_TAG, extraArgs);
  }
}
"
    },
    "@chainlink/contracts/src/v0.8/shared/access/ConfirmedOwner.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwnerWithProposal} from "./ConfirmedOwnerWithProposal.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwner is ConfirmedOwnerWithProposal {
  constructor(
    address newOwner
  ) ConfirmedOwnerWithProposal(newOwner, address(0)) {}
}
"
    },
    "@chainlink/contracts/src/v0.8/shared/access/ConfirmedOwnerWithProposal.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IOwnable} from "../interfaces/IOwnable.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwnerWithProposal is IOwnable {
  address private s_owner;
  address private s_pendingOwner;

  event OwnershipTransferRequested(address indexed from, address indexed to);
  event OwnershipTransferred(address indexed from, address indexed to);

  constructor(address newOwner, address pendingOwner) {
    // solhint-disable-next-line gas-custom-errors
    require(newOwner != address(0), "Cannot set owner to zero");

    s_owner = newOwner;
    if (pendingOwner != address(0)) {
      _transferOwnership(pendingOwner);
    }
  }

  /// @notice Allows an owner to begin transferring ownership to a new address.
  function transferOwnership(
    address to
  ) public override onlyOwner {
    _transferOwnership(to);
  }

  /// @notice Allows an ownership transfer to be completed by the recipient.
  function acceptOwnership() external override {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_pendingOwner, "Must be proposed owner");

    address oldOwner = s_owner;
    s_owner = msg.sender;
    s_pendingOwner = address(0);

    emit OwnershipTransferred(oldOwner, msg.sender);
  }

  /// @notice Get the current owner
  function owner() public view override returns (address) {
    return s_owner;
  }

  /// @notice validate, transfer ownership, and emit relevant events
  function _transferOwnership(
    address to
  ) private {
    // solhint-disable-next-line gas-custom-errors
    require(to != msg.sender, "Cannot transfer to self");

    s_pendingOwner = to;

    emit OwnershipTransferRequested(s_owner, to);
  }

  /// @notice validate access
  function _validateOwnership() internal view {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_owner, "Only callable by owner");
  }

  /// @notice Reverts if called by anyone other than the contract owner.
  modifier onlyOwner() {
    _validateOwnership();
    _;
  }
}
"
    },
    "@chainlink/contracts/src/v0.8/shared/access/OwnerIsCreator.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwner} from "./ConfirmedOwner.sol";

/// @title The OwnerIsCreator contract
/// @notice A contract with helpers for basic contract ownership.
contract OwnerIsCreator is ConfirmedOwner {
  constructor() ConfirmedOwner(msg.sender) {}
}
"
    },
    "@chainlink/contracts/src/v0.8/shared/interfaces/IOwnable.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IOwnable {
  function owner() external returns (address);

  function transferOwnership(
    address recipient
  ) external;

  function acceptOwnership() external;
}
"
    },
    "@openzeppelin/contracts/security/ReentrancyGuard.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
"
    },
    "@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
"
    },
    "@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
"
    },
    "contracts/TokenTransferor.sol": {
      "content": "// SPDX-License-Identifier: MIT\r
pragma solidity 0.8.24;\r
\r
import {IRouterClient} from "@chainlink/contracts-ccip/contracts/interfaces/IRouterClient.sol";\r
import {OwnerIsCreator} from "@chainlink/contracts/src/v0.8/shared/access/OwnerIsCreator.sol";\r
import {Client} from "@chainlink/contracts-ccip/contracts/libraries/Client.sol";\r
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";\r
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";\r
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";\r
/**\r
 * THIS IS AN EXAMPLE CONTRACT THAT USES HARDCODED VALUES FOR CLARITY.\r
 * THIS IS AN EXAMPLE CONTRACT THAT USES UN-AUDITED CODE.\r
 * DO NOT USE THIS CODE IN PRODUCTION.\r
 */\r
\r
/// @title - A simple contract for transferring tokens across chains.\r
contract TokenTransferor is OwnerIsCreator,ReentrancyGuard {\r
    using SafeERC20 for IERC20;\r
\r
    // Custom errors to provide more descriptive revert messages.\r
    error NotEnoughBalance(uint256 currentBalance, uint256 requiredBalance); // Used to make sure contract has enough token balance\r
    error NothingToWithdraw(); // Used when trying to withdraw Ether but there's nothing to withdraw.\r
    error FailedToWithdrawEth(address owner, address target, uint256 value); // Used when the withdrawal of Ether fails.\r
    error DestinationChainNotAllowlisted(uint64 destinationChainSelector); // Used when the destination chain has not been allowlisted by the contract owner.\r
    error InvalidReceiverAddress(); // Used when the receiver address is 0.\r
    // Event emitted when the tokens are transferred to an account on another chain.\r
    event TokensTransferred(\r
        bytes32 indexed messageId, // The unique ID of the message.\r
        uint64 indexed destinationChainSelector, // The chain selector of the destination chain.\r
        address receiver, // The address of the receiver on the destination chain.\r
        address token, // The token address that was transferred.\r
        uint256 tokenAmount, // The token amount that was transferred.\r
        address feeToken, // the token address used to pay CCIP fees.\r
        uint256 fees // The fees paid for sending the message.\r
    );\r
\r
    // Mapping to keep track of allowlisted destination chains.\r
    mapping(uint64 => bool) public allowlistedChains;\r
\r
    IRouterClient private s_router;\r
\r
    IERC20 private s_linkToken;\r
\r
    /// @notice Constructor initializes the contract with the router address.\r
    /// @param _router The address of the router contract.\r
    /// @param _link The address of the link contract.\r
    constructor(address _router, address _link) {\r
        s_router = IRouterClient(_router);\r
        s_linkToken = IERC20(_link);\r
    }\r
\r
    /// @dev Modifier that checks if the chain with the given destinationChainSelector is allowlisted.\r
    /// @param _destinationChainSelector The selector of the destination chain.\r
    modifier onlyAllowlistedChain(uint64 _destinationChainSelector) {\r
        if (!allowlistedChains[_destinationChainSelector])\r
            revert DestinationChainNotAllowlisted(_destinationChainSelector);\r
        _;\r
    }\r
\r
    /// @dev Modifier that checks the receiver address is not 0.\r
    /// @param _receiver The receiver address.\r
    modifier validateReceiver(address _receiver) {\r
        if (_receiver == address(0)) revert InvalidReceiverAddress();\r
        _;\r
    }\r
\r
    /// @dev Updates the allowlist status of a destination chain for transactions.\r
    /// @notice This function can only be called by the owner.\r
    /// @param _destinationChainSelector The selector of the destination chain to be updated.\r
    /// @param allowed The allowlist status to be set for the destination chain.\r
    function allowlistDestinationChain(\r
        uint64 _destinationChainSelector,\r
        bool allowed\r
    ) external onlyOwner {\r
        allowlistedChains[_destinationChainSelector] = allowed;\r
    }\r
\r
    /// @notice Transfer tokens to receiver on the destination chain.\r
    /// @notice pay in LINK.\r
    /// @notice the token must be in the list of supported tokens.\r
    /// @notice This function can only be called by the owner.\r
    /// @dev Assumes your contract has sufficient LINK tokens to pay for the fees.\r
    /// @param _destinationChainSelector The identifier (aka selector) for the destination blockchain.\r
    /// @param _receiver The address of the recipient on the destination blockchain.\r
    /// @param _token token address.\r
    /// @param _amount token amount.\r
    /// @return messageId The ID of the message that was sent.\r
    function transferTokensPayLINK(\r
        uint64 _destinationChainSelector,\r
        address _receiver,\r
        address _token,\r
        uint256 _amount\r
    )\r
        external\r
        onlyAllowlistedChain(_destinationChainSelector)\r
        validateReceiver(_receiver)\r
        nonReentrant \r
        returns (bytes32 messageId)\r
    {\r
        // Create an EVM2AnyMessage struct in memory with necessary information for sending a cross-chain message\r
        //  address(linkToken) means fees are paid in LINK\r
        Client.EVM2AnyMessage memory evm2AnyMessage = _buildCCIPMessage(\r
            _receiver,\r
            _token,\r
            _amount,\r
            address(s_linkToken)\r
        );\r
\r
        // Get the fee required to send the message\r
        uint256 fees = s_router.getFee(\r
            _destinationChainSelector,\r
            evm2AnyMessage\r
        );\r
\r
        uint256 requiredLinkBalance;\r
        if (_token == address(s_linkToken)) {\r
            // Required LINK Balance is the sum of fees and amount to transfer, if the token to transfer is LINK\r
            requiredLinkBalance = fees + _amount;\r
        } else {\r
            requiredLinkBalance = fees;\r
        }\r
    \r
        // If sending a token other than LINK, approve it separately\r
        if (_token != address(s_linkToken)) {\r
            //transferFrom  user to  contract\r
            IERC20(_token).transferFrom(address(msg.sender), address(this), _amount);\r
            // approve the Router to spend tokens on contract's behalf. It will spend the amount of the given token\r
            IERC20(_token).approve(address(s_router), _amount);\r
        }\r
        s_linkToken.transferFrom(address(msg.sender), address(this), requiredLinkBalance);\r
        // approve the Router to transfer LINK tokens on contract's behalf. It will spend the requiredLinkBalance\r
        s_linkToken.approve(address(s_router), requiredLinkBalance);    \r
\r
        //------------------\r
        // Send the message through the router and store the returned message ID\r
        messageId = s_router.ccipSend(\r
            _destinationChainSelector,\r
            evm2AnyMessage\r
        );\r
\r
        // Emit an event with message details\r
        emit TokensTransferred(\r
            messageId,\r
            _destinationChainSelector,\r
            _receiver,\r
            _token,\r
            _amount,\r
            address(s_linkToken),\r
            fees\r
        );\r
\r
        // Return the message ID\r
        return messageId;\r
    }\r
\r
    /// @notice Transfer tokens to receiver on the destination chain.\r
    /// @notice Pay in native gas such as ETH on Ethereum or POL on Polygon.\r
    /// @notice the token must be in the list of supported tokens.\r
    /// @notice This function can only be called by the owner.\r
    /// @dev Assumes your contract has sufficient native gas like ETH on Ethereum or POL on Polygon.\r
    /// @param _destinationChainSelector The identifier (aka selector) for the destination blockchain.\r
    /// @param _receiver The address of the recipient on the destination blockchain.\r
    /// @param _token token address.\r
    /// @param _amount token amount.\r
    /// @return messageId The ID of the message that was sent.\r
    function transferTokensPayNative(\r
        uint64 _destinationChainSelector,\r
        address _receiver,\r
        address _token,\r
        uint256 _amount\r
    )\r
        external payable \r
        onlyAllowlistedChain(_destinationChainSelector)\r
        validateReceiver(_receiver)\r
        nonReentrant \r
        returns (bytes32 messageId)\r
    {\r
        // Create an EVM2AnyMessage struct in memory with necessary information for sending a cross-chain message\r
        // address(0) means fees are paid in native gas\r
        Client.EVM2AnyMessage memory evm2AnyMessage = _buildCCIPMessage(\r
            _receiver,\r
            _token,\r
            _amount,\r
            address(0)\r
        );\r
\r
        // Get the fee required to send the message\r
        uint256 fees = s_router.getFee(\r
            _destinationChainSelector,\r
            evm2AnyMessage\r
        );\r
\r
\r
        //-----------\r
        if (fees > address(this).balance)\r
            revert NotEnoughBalance(address(this).balance, fees);\r
\r
        //transferFrom  user to  contract\r
        IERC20(_token).transferFrom(address(msg.sender), address(this), _amount);\r
        // approve the Router to spend tokens on contract's behalf. It will spend the amount of the given token\r
        IERC20(_token).approve(address(s_router), _amount);\r
\r
        // Send the message through the router and store the returned message ID\r
        messageId = s_router.ccipSend{value: fees}(\r
            _destinationChainSelector,\r
            evm2AnyMessage\r
        );\r
\r
        //transfer Remaining gas  to  user\r
\r
\r
\r
        uint256 remainingFee=msg.value-fees;\r
        if(remainingFee>0){\r
            (bool success,)=address(msg.sender).call{value:msg.value-fees}("");\r
            require(success, "transfer fail");\r
        }\r
        // Emit an event with message details\r
        emit TokensTransferred(\r
            messageId,\r
            _destinationChainSelector,\r
            _receiver,\r
            _token,\r
            _amount,\r
            address(0),\r
            fees\r
        );\r
\r
        // Return the message ID\r
        return messageId;\r
    }\r
\r
\r
    function getFee(uint64 _destinationChainSelector,\r
        address _receiver,\r
        address _token,\r
        uint256 _amount)   public view returns(uint256){\r
       // Create an EVM2AnyMessage struct in memory with necessary information for sending a cross-chain message\r
        // address(0) means fees are paid in native gas\r
        Client.EVM2AnyMessage memory evm2AnyMessage = _buildCCIPMessage(\r
            _receiver,\r
            _token,\r
            _amount,\r
            address(0)\r
        );\r
\r
        // Get the fee required to send the message\r
        uint256 fees = s_router.getFee(\r
            _destinationChainSelector,\r
            evm2AnyMessage\r
        );\r
        return fees; \r
    }\r
\r
\r
    /// @notice Construct a CCIP message.\r
    /// @dev This function will create an EVM2AnyMessage struct with all the necessary information for tokens transfer.\r
    /// @param _receiver The address of the receiver.\r
    /// @param _token The token to be transferred.\r
    /// @param _amount The amount of the token to be transferred.\r
    /// @param _feeTokenAddress The address of the token used for fees. Set address(0) for native gas.\r
    /// @return Client.EVM2AnyMessage Returns an EVM2AnyMessage struct which contains information for sending a CCIP message.\r
    function _buildCCIPMessage(\r
        address _receiver,\r
        address _token,\r
        uint256 _amount,\r
        address _feeTokenAddress\r
    ) private pure returns (Client.EVM2AnyMessage memory) {\r
        // Set the token amounts\r
        Client.EVMTokenAmount[]\r
            memory tokenAmounts = new Client.EVMTokenAmount[](1);\r
            tokenAmounts[0] = Client.EVMTokenAmount({\r
            token: _token,\r
            amount: _amount\r
        });\r
\r
        // Create an EVM2AnyMessage struct in memory with necessary information for sending a cross-chain message\r
        return\r
            Client.EVM2AnyMessage({\r
                receiver: abi.encode(_receiver), // ABI-encoded receiver address\r
                data: "", // No data\r
                tokenAmounts: tokenAmounts, // The amount and type of token being transferred\r
                extraArgs: Client._argsToBytes(\r
                    // Additional arguments, setting gas limit and allowing out-of-order execution.\r
                    // Best Practice: For simplicity, the values are hardcoded. It is advisable to use a more dynamic approach\r
                    // where you set the extra arguments off-chain. This allows adaptation depending on the lanes, messages,\r
                    // and ensures compatibility with future CCIP upgrades. Read more about it here: https://docs.chain.link/ccip/concepts/best-practices/evm#using-extraargs\r
                    Client.GenericExtraArgsV2({\r
                        gasLimit: 0, // Gas limit for the callback on the destination chain\r
                        allowOutOfOrderExecution: true // Allows the message to be executed out of order relative to other messages from the same sender\r
                    })\r
                ),\r
                // Set the feeToken to a feeTokenAddress, indicating specific asset will be used for fees\r
                feeToken: _feeTokenAddress\r
            });\r
    }\r
\r
    /// @notice Fallback function to allow the contract to receive Ether.\r
    /// @dev This function has no function body, making it a default function for receiving Ether.\r
    /// It is automatically called when Ether is transferred to the contract without any data.\r
    receive() external payable {}\r
\r
    /// @notice Allows the contract owner to withdraw the entire balance of Ether from the contract.\r
    /// @dev This function reverts if there are no funds to withdraw or if the transfer fails.\r
    /// It should only be callable by the owner of the contract.\r
    /// @param _beneficiary The address to which the Ether should be transferred.\r
    function withdraw(address _beneficiary) public onlyOwner {\r
        // Retrieve the balance of this contract\r
        uint256 amount = address(this).balance;\r
\r
        // Revert if there is nothing to withdraw\r
        if (amount == 0) revert NothingToWithdraw();\r
\r
        // Attempt to send the funds, capturing the success status and discarding any return data\r
        (bool sent, ) = _beneficiary.call{value: amount}("");\r
\r
        // Revert if the send failed, with information about the attempted transfer\r
        if (!sent) revert FailedToWithdrawEth(msg.sender, _beneficiary, amount);\r
    }\r
\r
    /// @notice Allows the owner of the contract to withdraw all tokens of a specific ERC20 token.\r
    /// @dev This function reverts with a 'NothingToWithdraw' error if there are no tokens to withdraw.\r
    /// @param _beneficiary The address to which the tokens will be sent.\r
    /// @param _token The contract address of the ERC20 token to be withdrawn.\r
    function withdrawToken(\r
        address _beneficiary,\r
        address _token\r
    ) public onlyOwner {\r
        // Retrieve the balance of this contract\r
        uint256 amount = IERC20(_token).balanceOf(address(this));\r
\r
        // Revert if there is nothing to withdraw\r
        if (amount == 0) revert NothingToWithdraw();\r
\r
        IERC20(_token).safeTransfer(_beneficiary, amount);\r
    }\r
}\r
"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 200
    },
    "evmVersion": "paris",
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    }
  }
}}