Description:
Multi-signature wallet contract requiring multiple confirmations for transaction execution.
Blockchain: Ethereum
Source Code: View Code On The Blockchain
Solidity Source Code:
{{
"language": "Solidity",
"sources": {
"src/FeeCollector.sol": {
"content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;
import {Ownable} from "@oz/contracts/access/Ownable.sol";
import {ReentrancyGuard} from "@oz/contracts/utils/ReentrancyGuard.sol";
import {SafeTransferLib} from "solady/utils/SafeTransferLib.sol";
import {IERC20} from "@oz/contracts/token/ERC20/IERC20.sol";
/// @title FeeCollector
/// @notice Receives fees from FeeHook and distributes them to multiple recipients based on percentage allocations
/// @dev Manages fee distribution with configurable recipient addresses and basis point allocations
contract FeeCollector is Ownable, ReentrancyGuard {
/// @notice Total basis points for percentage calculations (100%)
uint256 private constant TOTAL_BIPS = 10000;
/// @notice Struct to store recipient information
struct Recipient {
address recipient;
uint256 basisPoints; // Out of 10000 (100%)
}
/// @notice Array of fee recipients
Recipient[] public recipients;
/// @notice Invalid recipient address (zero address)
error InvalidRecipient();
/// @notice Invalid basis points total (must equal TOTAL_BIPS)
error InvalidBasisPointsTotal();
/// @notice Invalid basis points value
error InvalidBasisPoints();
/// @notice No recipients configured
error NoRecipients();
/// @notice Insufficient balance for distribution
error InsufficientBalance();
/// @notice Distribution failed for recipient
error DistributionFailed(address recipient);
/// @notice Emitted when fees are distributed
event FeesDistributed(uint256 totalAmount, uint256 timestamp);
/// @notice Emitted when a recipient is added
event RecipientAdded(address indexed recipient, uint256 basisPoints);
/// @notice Emitted when a recipient is updated
event RecipientUpdated(
uint256 indexed index,
address indexed recipient,
uint256 basisPoints
);
/// @notice Emitted when a recipient is removed
event RecipientRemoved(uint256 indexed index, address indexed recipient);
/// @notice Emitted when all recipients are replaced
event RecipientsReplaced(uint256 count);
/// @notice Emitted when emergency withdrawal is performed
event EmergencyWithdraw(
address indexed token,
address indexed to,
uint256 amount
);
/// @notice Constructor initializes the fee collector with owner and optional recipients
/// @param _owner Address of the contract owner
/// @param _recipients Initial array of recipients (optional)
constructor(
address _owner,
Recipient[] memory _recipients
) Ownable(_owner) {
if (_recipients.length > 0) {
_setRecipients(_recipients);
}
}
/// @notice Receives ETH
receive() external payable {}
/// @notice Manually trigger fee distribution to all recipients
/// @dev Can be called by anyone
function distribute() external nonReentrant {
if (recipients.length == 0) revert NoRecipients();
uint256 balance = address(this).balance;
if (balance == 0) revert InsufficientBalance();
_distribute();
}
/// @notice Internal function to distribute fees
/// @dev This function assumes the caller has nonReentrant protection
function _distribute() internal {
uint256 balance = address(this).balance;
if (balance == 0) return;
uint256 recipientCount = recipients.length;
uint256 distributed = 0;
// Distribute to all recipients except the last one
for (uint256 i = 0; i < recipientCount - 1; i++) {
uint256 amount = (balance * recipients[i].basisPoints) / TOTAL_BIPS;
distributed += amount;
SafeTransferLib.safeTransferETH(recipients[i].recipient, amount);
}
// Send remaining balance to last recipient to handle rounding dust
uint256 remaining = balance - distributed;
if (remaining > 0) {
SafeTransferLib.safeTransferETH(
recipients[recipientCount - 1].recipient,
remaining
);
}
emit FeesDistributed(balance, block.timestamp);
}
/// @notice Add a new recipient
/// @param _recipient Address of the recipient
/// @param _basisPoints Basis points allocation (out of 10000)
/// @dev This will replace all existing recipients with a new set including this one
function addRecipient(
address _recipient,
uint256 _basisPoints
) external onlyOwner {
if (_recipient == address(0)) revert InvalidRecipient();
if (_basisPoints == 0 || _basisPoints > TOTAL_BIPS)
revert InvalidBasisPoints();
recipients.push(Recipient(_recipient, _basisPoints));
// Verify total doesn't exceed 100%
uint256 total = _getTotalBasisPoints();
if (total > TOTAL_BIPS) revert InvalidBasisPointsTotal();
emit RecipientAdded(_recipient, _basisPoints);
}
/// @notice Update an existing recipient
/// @param _index Index of the recipient to update
/// @param _recipient New address for the recipient
/// @param _basisPoints New basis points allocation
function updateRecipient(
uint256 _index,
address _recipient,
uint256 _basisPoints
) external onlyOwner {
if (_index >= recipients.length) revert InvalidRecipient();
if (_recipient == address(0)) revert InvalidRecipient();
if (_basisPoints == 0 || _basisPoints > TOTAL_BIPS)
revert InvalidBasisPoints();
recipients[_index] = Recipient(_recipient, _basisPoints);
// Verify total is valid
uint256 total = _getTotalBasisPoints();
if (total > TOTAL_BIPS) revert InvalidBasisPointsTotal();
emit RecipientUpdated(_index, _recipient, _basisPoints);
}
/// @notice Remove a recipient
/// @param _index Index of the recipient to remove
function removeRecipient(uint256 _index) external onlyOwner {
if (_index >= recipients.length) revert InvalidRecipient();
address removedRecipient = recipients[_index].recipient;
// Move the last element to the deleted position and pop
recipients[_index] = recipients[recipients.length - 1];
recipients.pop();
emit RecipientRemoved(_index, removedRecipient);
}
/// @notice Replace all recipients with a new set
/// @param _recipients New array of recipients
/// @dev Total basis points must equal TOTAL_BIPS (10000)
function setRecipients(
Recipient[] calldata _recipients
) external onlyOwner {
_setRecipients(_recipients);
emit RecipientsReplaced(_recipients.length);
}
/// @notice Internal function to set recipients and validate
function _setRecipients(Recipient[] memory _recipients) internal {
if (_recipients.length == 0) revert NoRecipients();
uint256 totalBasisPoints = 0;
delete recipients; // Clear existing recipients
for (uint256 i = 0; i < _recipients.length; i++) {
if (_recipients[i].recipient == address(0))
revert InvalidRecipient();
if (_recipients[i].basisPoints == 0) revert InvalidBasisPoints();
totalBasisPoints += _recipients[i].basisPoints;
recipients.push(_recipients[i]);
}
if (totalBasisPoints != TOTAL_BIPS) revert InvalidBasisPointsTotal();
}
/// @notice Emergency withdraw function to recover ETH or ERC20 tokens
/// @param token Address of the token to withdraw (address(0) for ETH)
/// @param to Address to send the withdrawn funds to
/// @param amount Amount to withdraw (use 0 to withdraw entire balance)
/// @dev Only callable by the owner in case of emergency or stuck funds
function emergencyWithdraw(
address token,
address to,
uint256 amount
) external onlyOwner nonReentrant {
require(to != address(0), "Invalid recipient address");
if (token == address(0)) {
// Withdraw ETH
uint256 withdrawAmount = amount == 0
? address(this).balance
: amount;
require(withdrawAmount > 0, "No ETH to withdraw");
require(
address(this).balance >= withdrawAmount,
"Insufficient ETH balance"
);
SafeTransferLib.safeTransferETH(to, withdrawAmount);
emit EmergencyWithdraw(address(0), to, withdrawAmount);
} else {
// Withdraw ERC20
uint256 withdrawAmount = amount == 0
? IERC20(token).balanceOf(address(this))
: amount;
require(withdrawAmount > 0, "No tokens to withdraw");
require(
IERC20(token).balanceOf(address(this)) >= withdrawAmount,
"Insufficient token balance"
);
SafeTransferLib.safeTransfer(token, to, withdrawAmount);
emit EmergencyWithdraw(token, to, withdrawAmount);
}
}
/// @notice Get the total basis points allocated
/// @return Total basis points across all recipients
function _getTotalBasisPoints() internal view returns (uint256) {
uint256 total = 0;
for (uint256 i = 0; i < recipients.length; i++) {
total += recipients[i].basisPoints;
}
return total;
}
/// @notice Get the number of recipients
/// @return Number of configured recipients
function getRecipientCount() external view returns (uint256) {
return recipients.length;
}
/// @notice Get all recipients
/// @return Array of all recipients
function getRecipients() external view returns (Recipient[] memory) {
return recipients;
}
/// @notice Get a specific recipient
/// @param _index Index of the recipient
/// @return Recipient struct at the specified index
function getRecipient(
uint256 _index
) external view returns (Recipient memory) {
if (_index >= recipients.length) revert InvalidRecipient();
return recipients[_index];
}
/// @notice Get total basis points allocated (for external verification)
/// @return Total basis points
function getTotalBasisPoints() external view returns (uint256) {
return _getTotalBasisPoints();
}
}
"
},
"lib/openzeppelin-contracts/contracts/access/Ownable.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
pragma solidity ^0.8.20;
import {Context} from "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is set to the address provided by the deployer. This can
* later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
/**
* @dev The caller account is not authorized to perform an operation.
*/
error OwnableUnauthorizedAccount(address account);
/**
* @dev The owner is not a valid owner account. (eg. `address(0)`)
*/
error OwnableInvalidOwner(address owner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the address provided by the deployer as the initial owner.
*/
constructor(address initialOwner) {
if (initialOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(initialOwner);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
if (owner() != _msgSender()) {
revert OwnableUnauthorizedAccount(_msgSender());
}
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
if (newOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
"
},
"lib/openzeppelin-contracts/contracts/utils/ReentrancyGuard.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)
pragma solidity ^0.8.20;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
* consider using {ReentrancyGuardTransient} instead.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant NOT_ENTERED = 1;
uint256 private constant ENTERED = 2;
uint256 private _status;
/**
* @dev Unauthorized reentrant call.
*/
error ReentrancyGuardReentrantCall();
constructor() {
_status = NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be NOT_ENTERED
if (_status == ENTERED) {
revert ReentrancyGuardReentrantCall();
}
// Any calls to nonReentrant after this point will fail
_status = ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = NOT_ENTERED;
}
/**
* @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
* `nonReentrant` function in the call stack.
*/
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == ENTERED;
}
}
"
},
"lib/solady/src/utils/SafeTransferLib.sol": {
"content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/SafeTransferLib.sol)
/// @author Modified from Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @author Permit2 operations from (https://github.com/Uniswap/permit2/blob/main/src/libraries/Permit2Lib.sol)
///
/// @dev Note:
/// - For ETH transfers, please use `forceSafeTransferETH` for DoS protection.
library SafeTransferLib {
/*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
/* CUSTOM ERRORS */
/*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
/// @dev The ETH transfer has failed.
error ETHTransferFailed();
/// @dev The ERC20 `transferFrom` has failed.
error TransferFromFailed();
/// @dev The ERC20 `transfer` has failed.
error TransferFailed();
/// @dev The ERC20 `approve` has failed.
error ApproveFailed();
/// @dev The ERC20 `totalSupply` query has failed.
error TotalSupplyQueryFailed();
/// @dev The Permit2 operation has failed.
error Permit2Failed();
/// @dev The Permit2 amount must be less than `2**160 - 1`.
error Permit2AmountOverflow();
/// @dev The Permit2 approve operation has failed.
error Permit2ApproveFailed();
/// @dev The Permit2 lockdown operation has failed.
error Permit2LockdownFailed();
/*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
/* CONSTANTS */
/*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
/// @dev Suggested gas stipend for contract receiving ETH that disallows any storage writes.
uint256 internal constant GAS_STIPEND_NO_STORAGE_WRITES = 2300;
/// @dev Suggested gas stipend for contract receiving ETH to perform a few
/// storage reads and writes, but low enough to prevent griefing.
uint256 internal constant GAS_STIPEND_NO_GRIEF = 100000;
/// @dev The unique EIP-712 domain separator for the DAI token contract.
bytes32 internal constant DAI_DOMAIN_SEPARATOR =
0xdbb8cf42e1ecb028be3f3dbc922e1d878b963f411dc388ced501601c60f7c6f7;
/// @dev The address for the WETH9 contract on Ethereum mainnet.
address internal constant WETH9 = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
/// @dev The canonical Permit2 address.
/// [Github](https://github.com/Uniswap/permit2)
/// [Etherscan](https://etherscan.io/address/0x000000000022D473030F116dDEE9F6B43aC78BA3)
address internal constant PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;
/// @dev The canonical address of the `SELFDESTRUCT` ETH mover.
/// See: https://gist.github.com/Vectorized/1cb8ad4cf393b1378e08f23f79bd99fa
/// [Etherscan](https://etherscan.io/address/0x00000000000073c48c8055bD43D1A53799176f0D)
address internal constant ETH_MOVER = 0x00000000000073c48c8055bD43D1A53799176f0D;
/*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
/* ETH OPERATIONS */
/*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
// If the ETH transfer MUST succeed with a reasonable gas budget, use the force variants.
//
// The regular variants:
// - Forwards all remaining gas to the target.
// - Reverts if the target reverts.
// - Reverts if the current contract has insufficient balance.
//
// The force variants:
// - Forwards with an optional gas stipend
// (defaults to `GAS_STIPEND_NO_GRIEF`, which is sufficient for most cases).
// - If the target reverts, or if the gas stipend is exhausted,
// creates a temporary contract to force send the ETH via `SELFDESTRUCT`.
// Future compatible with `SENDALL`: https://eips.ethereum.org/EIPS/eip-4758.
// - Reverts if the current contract has insufficient balance.
//
// The try variants:
// - Forwards with a mandatory gas stipend.
// - Instead of reverting, returns whether the transfer succeeded.
/// @dev Sends `amount` (in wei) ETH to `to`.
function safeTransferETH(address to, uint256 amount) internal {
/// @solidity memory-safe-assembly
assembly {
if iszero(call(gas(), to, amount, codesize(), 0x00, codesize(), 0x00)) {
mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
revert(0x1c, 0x04)
}
}
}
/// @dev Sends all the ETH in the current contract to `to`.
function safeTransferAllETH(address to) internal {
/// @solidity memory-safe-assembly
assembly {
// Transfer all the ETH and check if it succeeded or not.
if iszero(call(gas(), to, selfbalance(), codesize(), 0x00, codesize(), 0x00)) {
mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
revert(0x1c, 0x04)
}
}
}
/// @dev Force sends `amount` (in wei) ETH to `to`, with a `gasStipend`.
function forceSafeTransferETH(address to, uint256 amount, uint256 gasStipend) internal {
/// @solidity memory-safe-assembly
assembly {
if lt(selfbalance(), amount) {
mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
revert(0x1c, 0x04)
}
if iszero(call(gasStipend, to, amount, codesize(), 0x00, codesize(), 0x00)) {
mstore(0x00, to) // Store the address in scratch space.
mstore8(0x0b, 0x73) // Opcode `PUSH20`.
mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
if iszero(create(amount, 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
}
}
}
/// @dev Force sends all the ETH in the current contract to `to`, with a `gasStipend`.
function forceSafeTransferAllETH(address to, uint256 gasStipend) internal {
/// @solidity memory-safe-assembly
assembly {
if iszero(call(gasStipend, to, selfbalance(), codesize(), 0x00, codesize(), 0x00)) {
mstore(0x00, to) // Store the address in scratch space.
mstore8(0x0b, 0x73) // Opcode `PUSH20`.
mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
if iszero(create(selfbalance(), 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
}
}
}
/// @dev Force sends `amount` (in wei) ETH to `to`, with `GAS_STIPEND_NO_GRIEF`.
function forceSafeTransferETH(address to, uint256 amount) internal {
/// @solidity memory-safe-assembly
assembly {
if lt(selfbalance(), amount) {
mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
revert(0x1c, 0x04)
}
if iszero(call(GAS_STIPEND_NO_GRIEF, to, amount, codesize(), 0x00, codesize(), 0x00)) {
mstore(0x00, to) // Store the address in scratch space.
mstore8(0x0b, 0x73) // Opcode `PUSH20`.
mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
if iszero(create(amount, 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
}
}
}
/// @dev Force sends all the ETH in the current contract to `to`, with `GAS_STIPEND_NO_GRIEF`.
function forceSafeTransferAllETH(address to) internal {
/// @solidity memory-safe-assembly
assembly {
// forgefmt: disable-next-item
if iszero(call(GAS_STIPEND_NO_GRIEF, to, selfbalance(), codesize(), 0x00, codesize(), 0x00)) {
mstore(0x00, to) // Store the address in scratch space.
mstore8(0x0b, 0x73) // Opcode `PUSH20`.
mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
if iszero(create(selfbalance(), 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
}
}
}
/// @dev Sends `amount` (in wei) ETH to `to`, with a `gasStipend`.
function trySafeTransferETH(address to, uint256 amount, uint256 gasStipend)
internal
returns (bool success)
{
/// @solidity memory-safe-assembly
assembly {
success := call(gasStipend, to, amount, codesize(), 0x00, codesize(), 0x00)
}
}
/// @dev Sends all the ETH in the current contract to `to`, with a `gasStipend`.
function trySafeTransferAllETH(address to, uint256 gasStipend)
internal
returns (bool success)
{
/// @solidity memory-safe-assembly
assembly {
success := call(gasStipend, to, selfbalance(), codesize(), 0x00, codesize(), 0x00)
}
}
/// @dev Force transfers ETH to `to`, without triggering the fallback (if any).
/// This method attempts to use a separate contract to send via `SELFDESTRUCT`,
/// and upon failure, deploys a minimal vault to accrue the ETH.
function safeMoveETH(address to, uint256 amount) internal returns (address vault) {
/// @solidity memory-safe-assembly
assembly {
to := shr(96, shl(96, to)) // Clean upper 96 bits.
for { let mover := ETH_MOVER } iszero(eq(to, address())) {} {
let selfBalanceBefore := selfbalance()
if or(lt(selfBalanceBefore, amount), eq(to, mover)) {
mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
revert(0x1c, 0x04)
}
if extcodesize(mover) {
let balanceBefore := balance(to) // Check via delta, in case `SELFDESTRUCT` is bricked.
mstore(0x00, to)
pop(call(gas(), mover, amount, 0x00, 0x20, codesize(), 0x00))
// If `address(to).balance >= amount + balanceBefore`, skip vault workflow.
if iszero(lt(balance(to), add(amount, balanceBefore))) { break }
// Just in case `SELFDESTRUCT` is changed to not revert and do nothing.
if lt(selfBalanceBefore, selfbalance()) { invalid() }
}
let m := mload(0x40)
// If the mover is missing or bricked, deploy a minimal vault
// that withdraws all ETH to `to` when being called only by `to`.
// forgefmt: disable-next-item
mstore(add(m, 0x20), 0x33146025575b600160005260206000f35b3d3d3d3d47335af1601a5760003dfd)
mstore(m, or(to, shl(160, 0x6035600b3d3960353df3fe73)))
// Compute and store the bytecode hash.
mstore8(0x00, 0xff) // Write the prefix.
mstore(0x35, keccak256(m, 0x40))
mstore(0x01, shl(96, address())) // Deployer.
mstore(0x15, 0) // Salt.
vault := keccak256(0x00, 0x55)
pop(call(gas(), vault, amount, codesize(), 0x00, codesize(), 0x00))
// The vault returns a single word on success. Failure reverts with empty data.
if iszero(returndatasize()) {
if iszero(create2(0, m, 0x40, 0)) { revert(codesize(), codesize()) } // For gas estimation.
}
mstore(0x40, m) // Restore the free memory pointer.
break
}
}
}
/*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
/* ERC20 OPERATIONS */
/*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
/// @dev Sends `amount` of ERC20 `token` from `from` to `to`.
/// Reverts upon failure.
///
/// The `from` account must have at least `amount` approved for
/// the current contract to manage.
function safeTransferFrom(address token, address from, address to, uint256 amount) internal {
/// @solidity memory-safe-assembly
assembly {
let m := mload(0x40) // Cache the free memory pointer.
mstore(0x60, amount) // Store the `amount` argument.
mstore(0x40, to) // Store the `to` argument.
mstore(0x2c, shl(96, from)) // Store the `from` argument.
mstore(0x0c, 0x23b872dd000000000000000000000000) // `transferFrom(address,address,uint256)`.
let success := call(gas(), token, 0, 0x1c, 0x64, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
if iszero(lt(or(iszero(extcodesize(token)), returndatasize()), success)) {
mstore(0x00, 0x7939f424) // `TransferFromFailed()`.
revert(0x1c, 0x04)
}
}
mstore(0x60, 0) // Restore the zero slot to zero.
mstore(0x40, m) // Restore the free memory pointer.
}
}
/// @dev Sends `amount` of ERC20 `token` from `from` to `to`.
///
/// The `from` account must have at least `amount` approved for the current contract to manage.
function trySafeTransferFrom(address token, address from, address to, uint256 amount)
internal
returns (bool success)
{
/// @solidity memory-safe-assembly
assembly {
let m := mload(0x40) // Cache the free memory pointer.
mstore(0x60, amount) // Store the `amount` argument.
mstore(0x40, to) // Store the `to` argument.
mstore(0x2c, shl(96, from)) // Store the `from` argument.
mstore(0x0c, 0x23b872dd000000000000000000000000) // `transferFrom(address,address,uint256)`.
success := call(gas(), token, 0, 0x1c, 0x64, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
success := lt(or(iszero(extcodesize(token)), returndatasize()), success)
}
mstore(0x60, 0) // Restore the zero slot to zero.
mstore(0x40, m) // Restore the free memory pointer.
}
}
/// @dev Sends all of ERC20 `token` from `from` to `to`.
/// Reverts upon failure.
///
/// The `from` account must have their entire balance approved for the current contract to manage.
function safeTransferAllFrom(address token, address from, address to)
internal
returns (uint256 amount)
{
/// @solidity memory-safe-assembly
assembly {
let m := mload(0x40) // Cache the free memory pointer.
mstore(0x40, to) // Store the `to` argument.
mstore(0x2c, shl(96, from)) // Store the `from` argument.
mstore(0x0c, 0x70a08231000000000000000000000000) // `balanceOf(address)`.
// Read the balance, reverting upon failure.
if iszero(
and( // The arguments of `and` are evaluated from right to left.
gt(returndatasize(), 0x1f), // At least 32 bytes returned.
staticcall(gas(), token, 0x1c, 0x24, 0x60, 0x20)
)
) {
mstore(0x00, 0x7939f424) // `TransferFromFailed()`.
revert(0x1c, 0x04)
}
mstore(0x00, 0x23b872dd) // `transferFrom(address,address,uint256)`.
amount := mload(0x60) // The `amount` is already at 0x60. We'll need to return it.
// Perform the transfer, reverting upon failure.
let success := call(gas(), token, 0, 0x1c, 0x64, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
if iszero(lt(or(iszero(extcodesize(token)), returndatasize()), success)) {
mstore(0x00, 0x7939f424) // `TransferFromFailed()`.
revert(0x1c, 0x04)
}
}
mstore(0x60, 0) // Restore the zero slot to zero.
mstore(0x40, m) // Restore the free memory pointer.
}
}
/// @dev Sends `amount` of ERC20 `token` from the current contract to `to`.
/// Reverts upon failure.
function safeTransfer(address token, address to, uint256 amount) internal {
/// @solidity memory-safe-assembly
assembly {
mstore(0x14, to) // Store the `to` argument.
mstore(0x34, amount) // Store the `amount` argument.
mstore(0x00, 0xa9059cbb000000000000000000000000) // `transfer(address,uint256)`.
// Perform the transfer, reverting upon failure.
let success := call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
if iszero(lt(or(iszero(extcodesize(token)), returndatasize()), success)) {
mstore(0x00, 0x90b8ec18) // `TransferFailed()`.
revert(0x1c, 0x04)
}
}
mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
}
}
/// @dev Sends all of ERC20 `token` from the current contract to `to`.
/// Reverts upon failure.
function safeTransferAll(address token, address to) internal returns (uint256 amount) {
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, 0x70a08231) // Store the function selector of `balanceOf(address)`.
mstore(0x20, address()) // Store the address of the current contract.
// Read the balance, reverting upon failure.
if iszero(
and( // The arguments of `and` are evaluated from right to left.
gt(returndatasize(), 0x1f), // At least 32 bytes returned.
staticcall(gas(), token, 0x1c, 0x24, 0x34, 0x20)
)
) {
mstore(0x00, 0x90b8ec18) // `TransferFailed()`.
revert(0x1c, 0x04)
}
mstore(0x14, to) // Store the `to` argument.
amount := mload(0x34) // The `amount` is already at 0x34. We'll need to return it.
mstore(0x00, 0xa9059cbb000000000000000000000000) // `transfer(address,uint256)`.
// Perform the transfer, reverting upon failure.
let success := call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
if iszero(lt(or(iszero(extcodesize(token)), returndatasize()), success)) {
mstore(0x00, 0x90b8ec18) // `TransferFailed()`.
revert(0x1c, 0x04)
}
}
mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
}
}
/// @dev Sets `amount` of ERC20 `token` for `to` to manage on behalf of the current contract.
/// Reverts upon failure.
function safeApprove(address token, address to, uint256 amount) internal {
/// @solidity memory-safe-assembly
assembly {
mstore(0x14, to) // Store the `to` argument.
mstore(0x34, amount) // Store the `amount` argument.
mstore(0x00, 0x095ea7b3000000000000000000000000) // `approve(address,uint256)`.
let success := call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
if iszero(lt(or(iszero(extcodesize(token)), returndatasize()), success)) {
mstore(0x00, 0x3e3f8f73) // `ApproveFailed()`.
revert(0x1c, 0x04)
}
}
mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
}
}
/// @dev Sets `amount` of ERC20 `token` for `to` to manage on behalf of the current contract.
/// If the initial attempt to approve fails, attempts to reset the approved amount to zero,
/// then retries the approval again (some tokens, e.g. USDT, requires this).
/// Reverts upon failure.
function safeApproveWithRetry(address token, address to, uint256 amount) internal {
/// @solidity memory-safe-assembly
assembly {
mstore(0x14, to) // Store the `to` argument.
mstore(0x34, amount) // Store the `amount` argument.
mstore(0x00, 0x095ea7b3000000000000000000000000) // `approve(address,uint256)`.
// Perform the approval, retrying upon failure.
let success := call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
if iszero(lt(or(iszero(extcodesize(token)), returndatasize()), success)) {
mstore(0x34, 0) // Store 0 for the `amount`.
mstore(0x00, 0x095ea7b3000000000000000000000000) // `approve(address,uint256)`.
pop(call(gas(), token, 0, 0x10, 0x44, codesize(), 0x00)) // Reset the approval.
mstore(0x34, amount) // Store back the original `amount`.
// Retry the approval, reverting upon failure.
success := call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
if iszero(and(eq(mload(0x00), 1), success)) {
// Check the `extcodesize` again just in case the token selfdestructs lol.
if iszero(lt(or(iszero(extcodesize(token)), returndatasize()), success)) {
mstore(0x00, 0x3e3f8f73) // `ApproveFailed()`.
revert(0x1c, 0x04)
}
}
}
}
mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
}
}
/// @dev Returns the amount of ERC20 `token` owned by `account`.
/// Returns zero if the `token` does not exist.
function balanceOf(address token, address account) internal view returns (uint256 amount) {
/// @solidity memory-safe-assembly
assembly {
mstore(0x14, account) // Store the `account` argument.
mstore(0x00, 0x70a08231000000000000000000000000) // `balanceOf(address)`.
amount :=
mul( // The arguments of `mul` are evaluated from right to left.
mload(0x20),
and( // The arguments of `and` are evaluated from right to left.
gt(returndatasize(), 0x1f), // At least 32 bytes returned.
staticcall(gas(), token, 0x10, 0x24, 0x20, 0x20)
)
)
}
}
/// @dev Performs a `token.balanceOf(account)` check.
/// `implemented` denotes whether the `token` does not implement `balanceOf`.
/// `amount` is zero if the `token` does not implement `balanceOf`.
function checkBalanceOf(address token, address account)
internal
view
returns (bool implemented, uint256 amount)
{
/// @solidity memory-safe-assembly
assembly {
mstore(0x14, account) // Store the `account` argument.
mstore(0x00, 0x70a08231000000000000000000000000) // `balanceOf(address)`.
implemented :=
and( // The arguments of `and` are evaluated from right to left.
gt(returndatasize(), 0x1f), // At least 32 bytes returned.
staticcall(gas(), token, 0x10, 0x24, 0x20, 0x20)
)
amount := mul(mload(0x20), implemented)
}
}
/// @dev Returns the total supply of the `token`.
/// Reverts if the token does not exist or does not implement `totalSupply()`.
function totalSupply(address token) internal view returns (uint256 result) {
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, 0x18160ddd) // `totalSupply()`.
if iszero(
and(gt(returndatasize(), 0x1f), staticcall(gas(), token, 0x1c, 0x04, 0x00, 0x20))
) {
mstore(0x00, 0x54cd9435) // `TotalSupplyQueryFailed()`.
revert(0x1c, 0x04)
}
result := mload(0x00)
}
}
/// @dev Sends `amount` of ERC20 `token` from `from` to `to`.
/// If the initial attempt fails, try to use Permit2 to transfer the token.
/// Reverts upon failure.
///
/// The `from` account must have at least `amount` approved for the current contract to manage.
function safeTransferFrom2(address token, address from, address to, uint256 amount) internal {
if (!trySafeTransferFrom(token, from, to, amount)) {
permit2TransferFrom(token, from, to, amount);
}
}
/// @dev Sends `amount` of ERC20 `token` from `from` to `to` via Permit2.
/// Reverts upon failure.
function permit2TransferFrom(address token, address from, address to, uint256 amount)
internal
{
/// @solidity memory-safe-assembly
assembly {
let m := mload(0x40)
mstore(add(m, 0x74), shr(96, shl(96, token)))
mstore(add(m, 0x54), amount)
mstore(add(m, 0x34), to)
mstore(add(m, 0x20), shl(96, from))
// `transferFrom(address,address,uint160,address)`.
mstore(m, 0x36c78516000000000000000000000000)
let p := PERMIT2
let exists := eq(chainid(), 1)
if iszero(exists) { exists := iszero(iszero(extcodesize(p))) }
if iszero(
and(
call(gas(), p, 0, add(m, 0x10), 0x84, codesize(), 0x00),
lt(iszero(extcodesize(token)), exists) // Token has code and Permit2 exists.
)
) {
mstore(0x00, 0x7939f4248757f0fd) // `TransferFromFailed()` or `Permit2AmountOverflow()`.
revert(add(0x18, shl(2, iszero(iszero(shr(160, amount))))), 0x04)
}
}
}
/// @dev Permit a user to spend a given amount of
/// another user's tokens via native EIP-2612 permit if possible, falling
/// back to Permit2 if native permit fails or is not implemented on the token.
function permit2(
address token,
address owner,
address spender,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
bool success;
/// @solidity memory-safe-assembly
assembly {
for {} shl(96, xor(token, WETH9)) {} {
mstore(0x00, 0x3644e515) // `DOMAIN_SEPARATOR()`.
if iszero(
and( // The arguments of `and` are evaluated from right to left.
lt(iszero(mload(0x00)), eq(returndatasize(), 0x20)), // Returns 1 non-zero word.
// Gas stipend to limit gas burn for tokens that don't refund gas when
// an non-existing function is called. 5K should be enough for a SLOAD.
staticcall(5000, token, 0x1c, 0x04, 0x00, 0x20)
)
) { break }
// After here, we can be sure that token is a contract.
let m := mload(0x40)
mstore(add(m, 0x34), spender)
mstore(add(m, 0x20), shl(96, owner))
mstore(add(m, 0x74), deadline)
if eq(mload(0x00), DAI_DOMAIN_SEPARATOR) {
mstore(0x14, owner)
mstore(0x00, 0x7ecebe00000000000000000000000000) // `nonces(address)`.
mstore(
add(m, 0x94),
lt(iszero(amount), staticcall(gas(), token, 0x10, 0x24, add(m, 0x54), 0x20))
)
mstore(m, 0x8fcbaf0c000000000000000000000000) // `IDAIPermit.permit`.
// `nonces` is already at `add(m, 0x54)`.
// `amount != 0` is already stored at `add(m, 0x94)`.
mstore(add(m, 0xb4), and(0xff, v))
mstore(add(m, 0xd4), r)
mstore(add(m, 0xf4), s)
success := call(gas(), token, 0, add(m, 0x10), 0x104, codesize(), 0x00)
break
}
mstore(m, 0xd505accf000000000000000000000000) // `IERC20Permit.permit`.
mstore(add(m, 0x54), amount)
mstore(add(m, 0x94), and(0xff, v))
mstore(add(m, 0xb4), r)
mstore(add(m, 0xd4), s)
success := call(gas(), token, 0, add(m, 0x10), 0xe4, codesize(), 0x00)
break
}
}
if (!success) simplePermit2(token, owner, spender, amount, deadline, v, r, s);
}
/// @dev Simple permit on the Permit2 contract.
function simplePermit2(
address token,
address owner,
address spender,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
/// @solidity memory-safe-assembly
assembly {
let m := mload(0x40)
mstore(m, 0x927da105) // `allowance(address,address,address)`.
{
let addressMask := shr(96, not(0))
mstore(add(m, 0x20), and(addressMask, owner))
mstore(add(m, 0x40), and(addressMask, token))
mstore(add(m, 0x60), and(addressMask, spender))
mstore(add(m, 0xc0), and(addressMask, spender))
}
let p := mul(PERMIT2, iszero(shr(160, amount)))
if iszero(
and( // The arguments of `and` are evaluated from right to left.
gt(returndatasize(), 0x5f), // Returns 3 words: `amount`, `expiration`, `nonce`.
staticcall(gas(), p, add(m, 0x1c), 0x64, add(m, 0x60), 0x60)
)
) {
mstore(0x00, 0x6b836e6b8757f0fd) // `Permit2Failed()` or `Permit2AmountOverflow()`.
revert(add(0x18, shl(2, iszero(p))), 0x04)
}
mstore(m, 0x2b67b570) // `Permit2.permit` (PermitSingle variant).
// `owner` is already `add(m, 0x20)`.
// `token` is already at `add(m, 0x40)`.
mstore(add(m, 0x60), amount)
mstore(add(m, 0x80), 0xffffffffffff) // `expiration = type(uint48).max`.
// `nonce` is already at `add(m, 0xa0)`.
// `spender` is already at `add(m, 0xc0)`.
mstore(add(m, 0xe0), deadline)
mstore(add(m, 0x100), 0x100) // `signature` offset.
mstore(add(m, 0x120), 0x41) // `signature` length.
mstore(add(m, 0x140), r)
mstore(add(m, 0x160), s)
mstore(add(m, 0x180), shl(248, v))
if iszero( // Revert if token does not have code, or if the call fails.
mul(extcodesize(token), call(gas(), p, 0, add(m, 0x1c), 0x184, codesize(), 0x00))) {
mstore(0x00, 0x6b836e6b) // `Permit2Failed()`.
revert(0x1c, 0x04)
}
}
}
/// @dev Approves `spender` to spend `amount` of `token` for `address(this)`.
function permit2Approve(address token, address spender, uint160 amount, uint48 expiration)
internal
{
/// @solidity memory-safe-assembly
assembly {
let addressMask := shr(96, not(0))
let m := mload(0x40)
mstore(m, 0x87517c45) // `approve(address,address,uint160,uint48)`.
mstore(add(m, 0x20), and(addressMask, token))
mstore(add(m, 0x40), and(addressMask, spender))
mstore(add(m, 0x60), and(addressMask, amount))
mstore(add(m, 0x80), and(0xffffffffffff, expiration))
if iszero(call(gas(), PERMIT2, 0, add(m, 0x1c), 0xa0, codesize(), 0x00)) {
mstore(0x00, 0x324f14ae) // `Permit2ApproveFailed()`.
revert(0x1c, 0x04)
}
}
}
/// @dev Revokes an approval for `token` and `spender` for `address(this)`.
function permit2Lockdown(address token, address spender) internal {
/// @solidity memory-safe-assembly
assembly {
let m := mload(0x40)
mstore(m, 0xcc53287f) // `Permit2.lockdown`.
mstore(add(m, 0x20), 0x20) // Offset of the `approvals`.
mstore(add(m, 0x40), 1) // `approvals.length`.
mstore(add(m, 0x60), shr(96, shl(96, token)))
mstore(add(m, 0x80), shr(96, shl(96, spender)))
if iszero(call(gas(), PERMIT2, 0, add(m, 0x1c), 0xa0, codesize(), 0x00)) {
mstore(0x00, 0x96b3de23) // `Permit2LockdownFailed()`.
revert(0x1c, 0x04)
}
}
}
}
"
},
"lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)
pragma solidity >=0.4.16;
/**
* @dev Interface of the ERC-20 standard as defined in the ERC.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
},
"lib/openzeppelin-contracts/contracts/utils/Context.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
"
}
},
"settings": {
"remappings": [
"@oz/=lib/openzeppelin-contracts/",
"@oz-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
"erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
"forge-std/=lib/forge-std/src/",
"halmos-cheatcodes/=lib/openzeppelin-contracts/lib/halmos-cheatcodes/src/",
"openzeppelin-contracts/=lib/openzeppelin-contracts/",
"solady/=lib/solady/src/",
"@uniswap/v4-core/=lib/v4-core/",
"@uniswap/v4-periphery/=lib/v4-periphery/",
"@ensdomains/=lib/v4-core/node_modules/@ensdomains/",
"@openzeppelin/=lib/v4-core/lib/openzeppelin-contracts/",
"ds-test/=lib/v4-core/lib/forge-std/lib/ds-test/src/",
"forge-gas-snapshot/=lib/v4-periphery/lib/permit2/lib/forge-gas-snapshot/src/",
"hardhat/=lib/v4-core/node_modules/hardhat/",
"openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
"permit2/=lib/v4-periphery/lib/permit2/",
"solmate/=lib/v4-core/lib/solmate/",
"v4-core/=lib/v4-core/src/",
"v4-periphery/=lib/v4-periphery/"
],
"optimizer": {
"enabled": false,
"runs": 200
},
"metadata": {
"useLiteralContent": false,
"bytecodeHash": "ipfs",
"appendCBOR": true
},
"outputSelection": {
"*": {
"*": [
"evm.bytecode",
"evm.deployedBytecode",
"devdoc",
"userdoc",
"metadata",
"abi"
]
}
},
"evmVersion": "prague",
"viaIR": false
}
}}Submitted on: 2025-10-28 20:25:29
Comments
Log in to comment.
No comments yet.