EagleVaultWrapper

{{
  "language": "Solidity",
  "sources": {
    "contracts/EagleVaultWrapper.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

interface IMintableBurnableOFT {
    function mint(address to, uint256 amount) external;
    function burn(address from, uint256 amount) external;
}

/**
 * @title EagleVaultWrapper
 * @notice Wraps Vault EAGLE shares into OFT EAGLE tokens on hub chain
 * 
 * @dev ARCHITECTURE:
 *      On Ethereum (hub), there are TWO EAGLE tokens:
 *      1. EagleOVault (0xVAULT...) - Vault shares (from deposits)
 *      2. EagleShareOFT (0xEEEE...) - OFT token (SAME address as all chains!)
 * 
 *      This bridge converts between them 1:1
 * 
 * @dev USER FLOWS:
 *      - Deposit → Get vault shares → Wrap to OFT → Trade/Bridge
 *      - Receive OFT → Unwrap to vault shares → Withdraw
 * 
 * @dev MECHANISM:
 *      - wrap(): Lock vault shares, mint OFT (1:1)
 *      - unwrap(): Burn OFT, release vault shares (1:1)
 *      - Maintains perfect 1:1 peg
 *      - No fees on wrapping/unwrapping
 */
contract EagleVaultWrapper is Ownable, ReentrancyGuard {
    using SafeERC20 for IERC20;
    
    // =================================
    // STATE VARIABLES
    // =================================
    
    /// @notice Vault EAGLE (ERC20 shares from EagleOVault)
    IERC20 public immutable VAULT_EAGLE;
    
    /// @notice OFT EAGLE (cross-chain compatible token)
    IMintableBurnableOFT public immutable OFT_EAGLE;
    
    /// @notice Tracking
    uint256 public totalLocked;    // Vault shares locked
    uint256 public totalMinted;    // OFT tokens minted
    
    /// @notice Fee configuration
    uint256 public depositFee = 100;   // 1% (100 basis points)
    uint256 public withdrawFee = 200;  // 2% (200 basis points)
    uint256 public constant MAX_FEE = 1000; // 10% maximum
    uint256 public constant BASIS_POINTS = 10000;
    
    /// @notice Fee recipients
    address public feeRecipient;
    
    /// @notice Presale whitelist (no fees)
    mapping(address => bool) public isWhitelisted;
    
    /// @notice Fee statistics
    uint256 public totalDepositFees;
    uint256 public totalWithdrawFees;
    
    // =================================
    // EVENTS
    // =================================
    
    event Wrapped(address indexed user, uint256 amount, uint256 fee);
    event Unwrapped(address indexed user, uint256 amount, uint256 fee);
    event FeeCollected(address indexed user, uint256 amount, string feeType);
    event WhitelistUpdated(address indexed user, bool isWhitelisted);
    event FeesUpdated(uint256 depositFee, uint256 withdrawFee);
    event FeeRecipientUpdated(address indexed newRecipient);
    
    // =================================
    // ERRORS
    // =================================
    
    error ZeroAmount();
    error InsufficientLockedShares();
    error BridgeImbalance();
    error FeeExceedsLimit();
    error ZeroFeeRecipient();
    
    // =================================
    // CONSTRUCTOR
    // =================================
    
    /**
     * @param _vaultEagle EagleOVault address (vault shares)
     * @param _oftEagle EagleShareOFT address (OFT token)
     * @param _owner Bridge owner
     */
    constructor(
        address _vaultEagle,
        address _oftEagle,
        address _feeRecipient,
        address _owner
    ) Ownable(_owner) {
        require(_vaultEagle != address(0) && _oftEagle != address(0), "Zero address");
        require(_feeRecipient != address(0), "Zero fee recipient");
        
        VAULT_EAGLE = IERC20(_vaultEagle);
        OFT_EAGLE = IMintableBurnableOFT(_oftEagle);
        feeRecipient = _feeRecipient;
        
        // Owner is whitelisted by default (no fees)
        isWhitelisted[_owner] = true;
        
        // Vault beneficiary whitelisted (for fee injection cycle - no double tax)
        // This allows vault fees to be re-injected without additional fees
        // Fee collection → vaultBeneficiary → deposit to vault → wrap → no fee ✅
        isWhitelisted[_feeRecipient] = true;
    }
    
    // =================================
    // WRAPPING FUNCTIONS
    // =================================
    
    /**
     * @notice Wrap vault shares → OFT tokens
     * @dev Locks vault shares, mints OFT tokens with 1% deposit fee (unless whitelisted)
     * @param amount Amount of vault shares to wrap
     */
    function wrap(uint256 amount) external nonReentrant {
        if (amount == 0) revert ZeroAmount();
        
        // Calculate fee (1% deposit fee, unless whitelisted)
        uint256 fee = 0;
        uint256 amountAfterFee = amount;
        
        if (!isWhitelisted[msg.sender]) {
            fee = (amount * depositFee) / BASIS_POINTS;
            amountAfterFee = amount - fee;
            
            if (fee > 0) {
                totalDepositFees += fee;
                emit FeeCollected(msg.sender, fee, "deposit");
            }
        }
        
        // Lock vault shares (including fee)
        VAULT_EAGLE.safeTransferFrom(msg.sender, address(this), amount);
        totalLocked += amount;
        
        // Send fee to recipient if applicable
        if (fee > 0) {
            VAULT_EAGLE.safeTransfer(feeRecipient, fee);
            totalLocked -= fee;  // Fee not locked, sent to recipient
        }
        
        // Mint OFT tokens (amount minus fee)
        OFT_EAGLE.mint(msg.sender, amountAfterFee);
        totalMinted += amountAfterFee;
        
        emit Wrapped(msg.sender, amountAfterFee, fee);
    }
    
    /**
     * @notice Unwrap OFT tokens → vault shares
     * @dev Burns OFT tokens, releases vault shares with 2% withdraw fee (unless whitelisted)
     * @param amount Amount of OFT tokens to unwrap
     */
    function unwrap(uint256 amount) external nonReentrant {
        if (amount == 0) revert ZeroAmount();
        
        // Calculate fee (2% withdraw fee, unless whitelisted)
        uint256 fee = 0;
        uint256 amountAfterFee = amount;
        
        if (!isWhitelisted[msg.sender]) {
            fee = (amount * withdrawFee) / BASIS_POINTS;
            amountAfterFee = amount - fee;
            
            if (fee > 0) {
                totalWithdrawFees += fee;
                emit FeeCollected(msg.sender, fee, "withdraw");
            }
        }
        
        if (totalLocked < amountAfterFee) revert InsufficientLockedShares();
        
        // Burn OFT tokens (full amount including fee)
        OFT_EAGLE.burn(msg.sender, amount);
        totalMinted -= amount;
        
        // Release vault shares (amount minus fee)
        VAULT_EAGLE.safeTransfer(msg.sender, amountAfterFee);
        totalLocked -= amountAfterFee;
        
        // Fee stays locked (becomes treasury/protocol owned)
        // Or send to fee recipient
        if (fee > 0) {
            VAULT_EAGLE.safeTransfer(feeRecipient, fee);
            totalLocked -= fee;
        }
        
        emit Unwrapped(msg.sender, amountAfterFee, fee);
    }
    
    // =================================
    // VIEW FUNCTIONS
    // =================================
    
    /**
     * @notice Check if bridge is balanced (should always be true)
     * @return True if locked vault shares == minted OFT tokens
     */
    function isBalanced() external view returns (bool) {
        return totalLocked == totalMinted;
    }
    
    /**
     * @notice Get bridge reserves
     * @return locked Vault shares locked in bridge
     * @return minted OFT tokens minted by bridge
     */
    function getReserves() external view returns (uint256 locked, uint256 minted) {
        return (totalLocked, totalMinted);
    }
    
    /**
     * @notice Get vault EAGLE address
     */
    function vaultToken() external view returns (address) {
        return address(VAULT_EAGLE);
    }
    
    /**
     * @notice Get OFT EAGLE address
     */
    function oftToken() external view returns (address) {
        return address(OFT_EAGLE);
    }
    
    /**
     * @notice Emergency check - verify balances match accounting
     */
    function verify() external view returns (bool) {
        uint256 actualLocked = VAULT_EAGLE.balanceOf(address(this));
        return actualLocked == totalLocked && totalLocked == totalMinted;
    }
    
    // =================================
    // FEE MANAGEMENT (OWNER ONLY)
    // =================================
    
    /**
     * @notice Update wrap/unwrap fees
     * @param _depositFee Deposit fee in basis points (max 10%)
     * @param _withdrawFee Withdraw fee in basis points (max 10%)
     */
    function setFees(uint256 _depositFee, uint256 _withdrawFee) external onlyOwner {
        if (_depositFee > MAX_FEE || _withdrawFee > MAX_FEE) revert FeeExceedsLimit();
        
        depositFee = _depositFee;
        withdrawFee = _withdrawFee;
        
        emit FeesUpdated(_depositFee, _withdrawFee);
    }
    
    /**
     * @notice Update fee recipient
     */
    function setFeeRecipient(address _feeRecipient) external onlyOwner {
        if (_feeRecipient == address(0)) revert ZeroFeeRecipient();
        feeRecipient = _feeRecipient;
        emit FeeRecipientUpdated(_feeRecipient);
    }
    
    /**
     * @notice Add address to presale whitelist (no fees)
     * @param user Address to whitelist
     * @param whitelisted True to whitelist, false to remove
     */
    function setWhitelist(address user, bool whitelisted) external onlyOwner {
        isWhitelisted[user] = whitelisted;
        emit WhitelistUpdated(user, whitelisted);
    }
    
    /**
     * @notice Batch whitelist multiple presale participants
     * @param users Array of addresses to whitelist
     */
    function batchWhitelist(address[] calldata users) external onlyOwner {
        for (uint256 i = 0; i < users.length; i++) {
            isWhitelisted[users[i]] = true;
            emit WhitelistUpdated(users[i], true);
        }
    }
    
    /**
     * @notice Check if user is whitelisted
     */
    function checkWhitelist(address user) external view returns (bool) {
        return isWhitelisted[user];
    }
    
    /**
     * @notice Get current fees
     */
    function getFees() external view returns (uint256 deposit, uint256 withdraw) {
        return (depositFee, withdrawFee);
    }
    
    /**
     * @notice Get fee statistics
     */
    function getFeeStats() external view returns (uint256 totalDeposit, uint256 totalWithdraw) {
        return (totalDepositFees, totalWithdrawFees);
    }
}

"
    },
    "node_modules/@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
    },
    "node_modules/@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/access/Ownable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/ReentrancyGuard.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
 * consider using {ReentrancyGuardTransient} instead.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/interfaces/IERC1363.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)

pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/Context.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)

pragma solidity >=0.4.16;

import {IERC20} from "../token/ERC20/IERC20.sol";
"
    },
    "node_modules/@openzeppelin/contracts/interfaces/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)

pragma solidity >=0.4.16;

import {IERC165} from "../utils/introspection/IERC165.sol";
"
    },
    "node_modules/@openzeppelin/contracts/utils/introspection/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
"
    }
  },
  "settings": {
    "remappings": [
      "@openzeppelin/=node_modules/@openzeppelin/",
      "@uniswap/=node_modules/@uniswap/",
      "@layerzerolabs/=node_modules/@layerzerolabs/",
      "base64-sol/=node_modules/base64-sol/",
      "eth-gas-reporter/=node_modules/eth-gas-reporter/",
      "forge-std/=lib/forge-std/src/",
      "hardhat-deploy/=node_modules/hardhat-deploy/",
      "hardhat/=node_modules/hardhat/"
    ],
    "optimizer": {
      "enabled": true,
      "runs": 200
    },
    "metadata": {
      "useLiteralContent": false,
      "bytecodeHash": "ipfs",
      "appendCBOR": true
    },
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    },
    "evmVersion": "paris",
    "viaIR": true
  }
}}