Description:
Multi-signature wallet contract requiring multiple confirmations for transaction execution.
Blockchain: Ethereum
Source Code: View Code On The Blockchain
Solidity Source Code:
{{
"language": "Solidity",
"sources": {
"src/FlashLoaner2.sol": {
"content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import { IWETH } from "./interfaces/IWETH.sol";
import { IPoolAddressesProvider } from "@aave/contracts/interfaces/IPoolAddressesProvider.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IUniswapV2Router02 } from "@uniswap-v2/contracts/interfaces/IUniswapV2Router02.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { FlashLoanSimpleReceiverBase } from
"@aave/contracts/flashloan/base/FlashLoanSimpleReceiverBase.sol";
/**
* @title FlashLoaner.
* @author mgnfy-view.
* @notice This contract can be used by any volume booster bot to increase the trading volume
* of a token pair on Uniswap. It flash borrows WETH from Aave, uses it to buy tokens on Uniswap,
* and sells those tokens in the same transaction to get back WETH and pay back the loan.
*/
contract FlashLoaner2 is FlashLoanSimpleReceiverBase {
using SafeERC20 for IERC20;
address private immutable i_weth;
address private immutable i_uniswapRouter02;
address private constant RECEIVER = 0x6Ec38A4FfBD68e02D982941BC5Dc1E0348c5b2BC;
error FlashLoaner__TransferFailed();
error FlashLoaner__UnsupportedToken(address token);
error FlashLoaner__InvalidInitiator(address initiator);
constructor(
address _addressProvider,
address _weth,
address _uniswapRouter02
)
FlashLoanSimpleReceiverBase(IPoolAddressesProvider(_addressProvider))
{
i_weth = _weth;
i_uniswapRouter02 = _uniswapRouter02;
}
receive() external payable { }
/**
* @notice Allows anyone to initiate a flash loan on Aave V3 using raw ETH.
* @dev Any surplus raw ETH passed will be returned at the end of the function.
* @param _amount The WETH amount to flash loan.
* @param _tokenToIncreaseVolumeOf The token to buy and sell with the flash loaned amount.
*/
function initiateFlashLoan(
uint256 _amount,
address _tokenToIncreaseVolumeOf,
uint256 _minimumTokenAmountOut,
uint256 _deadline,
uint256 _amount1,
uint256 _amount2
)
public
payable
{
// Convert raw ETH to WETH
// msg.value is used here so that a surplus amount of ETH can be converted to WETH
// This will allow us to pay the fee for the flash loan and the swaps
IWETH(i_weth).deposit{ value: msg.value }();
address thisAddress = address(this);
bytes memory encodedData =
abi.encode(_tokenToIncreaseVolumeOf, _minimumTokenAmountOut, _deadline, _amount1, _amount2);
uint16 referralCode = 0; // No referral
POOL.flashLoanSimple(thisAddress, i_weth, _amount, encodedData, referralCode);
uint256 wethBalance = IERC20(i_weth).balanceOf(thisAddress);
// Convert WETH to raw ETH and send back any remaining raw ETH to the msg.sender
IWETH(i_weth).withdraw(wethBalance);
(bool success,) = payable(msg.sender).call{ value: address(this).balance }("");
if (!success) revert FlashLoaner__TransferFailed();
}
/**
* @notice This is the callback function called by Aave after it has transferred the flashloan
* amount to our contract. The logic to increase the volume of a token pair is handled here.
* @param _asset The flash loaned asset. In our case, it's always WETH.
* @param _amount The flash loan amount.
* @param _premium The total fee to be paid for the flash loan.
* @param _initiator The address that initiated the flash loan. In our case, it should be this
* contract itself.
* @param _params Any encoded params passed by the initiator of the flash loan.
* @return A boolean indicating if the flash loan was successful or not.
*/
function executeOperation(
address _asset,
uint256 _amount,
uint256 _premium,
address _initiator,
bytes calldata _params
)
external
override
returns (bool)
{
if (_asset != i_weth) revert FlashLoaner__UnsupportedToken(_asset);
if (_initiator != address(this)) revert FlashLoaner__InvalidInitiator(_initiator);
(
address tokenToIncreaseVolumeOf,
uint256 minimumTokenAmountOut,
uint256 deadline,
uint256 _amount1,
uint256 _amount2
) = abi.decode(_params, (address, uint256, uint256, uint256, uint256));
// Buy the token
uint256 balanceBefore = IERC20(tokenToIncreaseVolumeOf).balanceOf(address(this));
_swap(i_weth, tokenToIncreaseVolumeOf, _amount, minimumTokenAmountOut, deadline, address(this));
uint256 balanceAfter = IERC20(tokenToIncreaseVolumeOf).balanceOf(address(this));
uint256 tokenAmountBought = balanceAfter - balanceBefore;
_swap(i_weth, tokenToIncreaseVolumeOf, _amount1, minimumTokenAmountOut, deadline, RECEIVER);
_swap(i_weth, tokenToIncreaseVolumeOf, _amount2, minimumTokenAmountOut, deadline, RECEIVER);
// The 0 amount out cannot be exploited here since this swap occurs in a single transaction
// where the previous swap had safety checks
// _swap(tokenToIncreaseVolumeOf, i_weth, amounts[1], 0, deadline);
_swap(tokenToIncreaseVolumeOf, i_weth, tokenAmountBought, 0, deadline, address(this));
// Approve the flash loaned amount plus the fee so that Aave can pull it back when
// control returns to it
uint256 paybackAmount = _amount + _premium;
IERC20(_asset).approve(address(POOL), paybackAmount);
return true;
}
function _swap(
address _inputToken,
address _outputToken,
uint256 _amountIn,
uint256 _minimumAmountOut,
uint256 _deadline,
address _recipient
)
internal
{
uint256 numCheckPoints = 2;
address[] memory path = new address[](numCheckPoints);
path[0] = _inputToken;
path[1] = _outputToken;
IERC20(_inputToken).approve(i_uniswapRouter02, _amountIn);
IUniswapV2Router02(i_uniswapRouter02).swapExactTokensForTokensSupportingFeeOnTransferTokens(_amountIn, _minimumAmountOut, path, _recipient, _deadline);
}
/**
* @notice Get the WETH address.
* @return The WETH token address.
*/
function getWETH() external view returns (address) {
return i_weth;
}
/**
* @notice Get the Uniswap V2 router 02 address.
* @return The Uniswap V2 router 02 address.
*/
function getUniswapV2Router02() external view returns (address) {
return i_uniswapRouter02;
}
}"
},
"src/interfaces/IWETH.sol": {
"content": "// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;
interface IWETH {
function deposit() external payable;
function withdraw(uint256 _amount) external;
}
"
},
"lib/aave-v3-core/contracts/interfaces/IPoolAddressesProvider.sol": {
"content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
* @title IPoolAddressesProvider
* @author Aave
* @notice Defines the basic interface for a Pool Addresses Provider.
*/
interface IPoolAddressesProvider {
/**
* @dev Emitted when the market identifier is updated.
* @param oldMarketId The old id of the market
* @param newMarketId The new id of the market
*/
event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
/**
* @dev Emitted when the pool is updated.
* @param oldAddress The old address of the Pool
* @param newAddress The new address of the Pool
*/
event PoolUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the pool configurator is updated.
* @param oldAddress The old address of the PoolConfigurator
* @param newAddress The new address of the PoolConfigurator
*/
event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the price oracle is updated.
* @param oldAddress The old address of the PriceOracle
* @param newAddress The new address of the PriceOracle
*/
event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the ACL manager is updated.
* @param oldAddress The old address of the ACLManager
* @param newAddress The new address of the ACLManager
*/
event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the ACL admin is updated.
* @param oldAddress The old address of the ACLAdmin
* @param newAddress The new address of the ACLAdmin
*/
event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the price oracle sentinel is updated.
* @param oldAddress The old address of the PriceOracleSentinel
* @param newAddress The new address of the PriceOracleSentinel
*/
event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the pool data provider is updated.
* @param oldAddress The old address of the PoolDataProvider
* @param newAddress The new address of the PoolDataProvider
*/
event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when a new proxy is created.
* @param id The identifier of the proxy
* @param proxyAddress The address of the created proxy contract
* @param implementationAddress The address of the implementation contract
*/
event ProxyCreated(
bytes32 indexed id,
address indexed proxyAddress,
address indexed implementationAddress
);
/**
* @dev Emitted when a new non-proxied contract address is registered.
* @param id The identifier of the contract
* @param oldAddress The address of the old contract
* @param newAddress The address of the new contract
*/
event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the implementation of the proxy registered with id is updated
* @param id The identifier of the contract
* @param proxyAddress The address of the proxy contract
* @param oldImplementationAddress The address of the old implementation contract
* @param newImplementationAddress The address of the new implementation contract
*/
event AddressSetAsProxy(
bytes32 indexed id,
address indexed proxyAddress,
address oldImplementationAddress,
address indexed newImplementationAddress
);
/**
* @notice Returns the id of the Aave market to which this contract points to.
* @return The market id
*/
function getMarketId() external view returns (string memory);
/**
* @notice Associates an id with a specific PoolAddressesProvider.
* @dev This can be used to create an onchain registry of PoolAddressesProviders to
* identify and validate multiple Aave markets.
* @param newMarketId The market id
*/
function setMarketId(string calldata newMarketId) external;
/**
* @notice Returns an address by its identifier.
* @dev The returned address might be an EOA or a contract, potentially proxied
* @dev It returns ZERO if there is no registered address with the given id
* @param id The id
* @return The address of the registered for the specified id
*/
function getAddress(bytes32 id) external view returns (address);
/**
* @notice General function to update the implementation of a proxy registered with
* certain `id`. If there is no proxy registered, it will instantiate one and
* set as implementation the `newImplementationAddress`.
* @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
* setter function, in order to avoid unexpected consequences
* @param id The id
* @param newImplementationAddress The address of the new implementation
*/
function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
/**
* @notice Sets an address for an id replacing the address saved in the addresses map.
* @dev IMPORTANT Use this function carefully, as it will do a hard replacement
* @param id The id
* @param newAddress The address to set
*/
function setAddress(bytes32 id, address newAddress) external;
/**
* @notice Returns the address of the Pool proxy.
* @return The Pool proxy address
*/
function getPool() external view returns (address);
/**
* @notice Updates the implementation of the Pool, or creates a proxy
* setting the new `pool` implementation when the function is called for the first time.
* @param newPoolImpl The new Pool implementation
*/
function setPoolImpl(address newPoolImpl) external;
/**
* @notice Returns the address of the PoolConfigurator proxy.
* @return The PoolConfigurator proxy address
*/
function getPoolConfigurator() external view returns (address);
/**
* @notice Updates the implementation of the PoolConfigurator, or creates a proxy
* setting the new `PoolConfigurator` implementation when the function is called for the first time.
* @param newPoolConfiguratorImpl The new PoolConfigurator implementation
*/
function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
/**
* @notice Returns the address of the price oracle.
* @return The address of the PriceOracle
*/
function getPriceOracle() external view returns (address);
/**
* @notice Updates the address of the price oracle.
* @param newPriceOracle The address of the new PriceOracle
*/
function setPriceOracle(address newPriceOracle) external;
/**
* @notice Returns the address of the ACL manager.
* @return The address of the ACLManager
*/
function getACLManager() external view returns (address);
/**
* @notice Updates the address of the ACL manager.
* @param newAclManager The address of the new ACLManager
*/
function setACLManager(address newAclManager) external;
/**
* @notice Returns the address of the ACL admin.
* @return The address of the ACL admin
*/
function getACLAdmin() external view returns (address);
/**
* @notice Updates the address of the ACL admin.
* @param newAclAdmin The address of the new ACL admin
*/
function setACLAdmin(address newAclAdmin) external;
/**
* @notice Returns the address of the price oracle sentinel.
* @return The address of the PriceOracleSentinel
*/
function getPriceOracleSentinel() external view returns (address);
/**
* @notice Updates the address of the price oracle sentinel.
* @param newPriceOracleSentinel The address of the new PriceOracleSentinel
*/
function setPriceOracleSentinel(address newPriceOracleSentinel) external;
/**
* @notice Returns the address of the data provider.
* @return The address of the DataProvider
*/
function getPoolDataProvider() external view returns (address);
/**
* @notice Updates the address of the data provider.
* @param newDataProvider The address of the new DataProvider
*/
function setPoolDataProvider(address newDataProvider) external;
}
"
},
"lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
},
"lib/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol": {
"content": "pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
"
},
"lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev An operation with an ERC20 token failed.
*/
error SafeERC20FailedOperation(address token);
/**
* @dev Indicates a failed `decreaseAllowance` request.
*/
error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
forceApprove(token, spender, oldAllowance + value);
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
* value, non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
unchecked {
uint256 currentAllowance = token.allowance(address(this), spender);
if (currentAllowance < requestedDecrease) {
revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
}
forceApprove(token, spender, currentAllowance - requestedDecrease);
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data);
if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
}
}
"
},
"lib/aave-v3-core/contracts/flashloan/base/FlashLoanSimpleReceiverBase.sol": {
"content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IFlashLoanSimpleReceiver} from '../interfaces/IFlashLoanSimpleReceiver.sol';
import {IPoolAddressesProvider} from '../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../interfaces/IPool.sol';
/**
* @title FlashLoanSimpleReceiverBase
* @author Aave
* @notice Base contract to develop a flashloan-receiver contract.
*/
abstract contract FlashLoanSimpleReceiverBase is IFlashLoanSimpleReceiver {
IPoolAddressesProvider public immutable override ADDRESSES_PROVIDER;
IPool public immutable override POOL;
constructor(IPoolAddressesProvider provider) {
ADDRESSES_PROVIDER = provider;
POOL = IPool(provider.getPool());
}
}
"
},
"lib/v2-periphery/contracts/interfaces/IUniswapV2Router01.sol": {
"content": "pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
"
},
"lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Permit.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* ==== Security Considerations
*
* There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
* expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
* considered as an intention to spend the allowance in any specific way. The second is that because permits have
* built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
* take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
* generally recommended is:
*
* ```solidity
* function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
* try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
* doThing(..., value);
* }
*
* function doThing(..., uint256 value) public {
* token.safeTransferFrom(msg.sender, address(this), value);
* ...
* }
* ```
*
* Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
* `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
* {SafeERC20-safeTransferFrom}).
*
* Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
* contracts should have entry points that don't rely on permit.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*
* CAUTION: See Security Considerations above.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
"
},
"lib/openzeppelin-contracts/contracts/utils/Address.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev The ETH balance of the account is not enough to perform the operation.
*/
error AddressInsufficientBalance(address account);
/**
* @dev There's no code at `target` (it is not a contract).
*/
error AddressEmptyCode(address target);
/**
* @dev A call to an address target failed. The target may have reverted.
*/
error FailedInnerCall();
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
if (address(this).balance < amount) {
revert AddressInsufficientBalance(address(this));
}
(bool success, ) = recipient.call{value: amount}("");
if (!success) {
revert FailedInnerCall();
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason or custom error, it is bubbled
* up by this function (like regular Solidity function calls). However, if
* the call reverted with no returned reason, this function reverts with a
* {FailedInnerCall} error.
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
if (address(this).balance < value) {
revert AddressInsufficientBalance(address(this));
}
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
* was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
* unsuccessful call.
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata
) internal view returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
// only check if target is a contract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
if (returndata.length == 0 && target.code.length == 0) {
revert AddressEmptyCode(target);
}
return returndata;
}
}
/**
* @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
* revert reason or with a default {FailedInnerCall} error.
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
return returndata;
}
}
/**
* @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
*/
function _revert(bytes memory returndata) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert FailedInnerCall();
}
}
}
"
},
"lib/aave-v3-core/contracts/flashloan/interfaces/IFlashLoanSimpleReceiver.sol": {
"content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from '../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../interfaces/IPool.sol';
/**
* @title IFlashLoanSimpleReceiver
* @author Aave
* @notice Defines the basic interface of a flashloan-receiver contract.
* @dev Implement this interface to develop a flashloan-compatible flashLoanReceiver contract
*/
interface IFlashLoanSimpleReceiver {
/**
* @notice Executes an operation after receiving the flash-borrowed asset
* @dev Ensure that the contract can return the debt + premium, e.g., has
* enough funds to repay and has approved the Pool to pull the total amount
* @param asset The address of the flash-borrowed asset
* @param amount The amount of the flash-borrowed asset
* @param premium The fee of the flash-borrowed asset
* @param initiator The address of the flashloan initiator
* @param params The byte-encoded params passed when initiating the flashloan
* @return True if the execution of the operation succeeds, false otherwise
*/
function executeOperation(
address asset,
uint256 amount,
uint256 premium,
address initiator,
bytes calldata params
) external returns (bool);
function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
function POOL() external view returns (IPool);
}
"
},
"lib/aave-v3-core/contracts/interfaces/IPool.sol": {
"content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
* @title IPool
* @author Aave
* @notice Defines the basic interface for an Aave Pool.
*/
interface IPool {
/**
* @dev Emitted on mintUnbacked()
* @param reserve The address of the underlying asset of the reserve
* @param user The address initiating the supply
* @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
* @param amount The amount of supplied assets
* @param referralCode The referral code used
*/
event MintUnbacked(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint16 indexed referralCode
);
/**
* @dev Emitted on backUnbacked()
* @param reserve The address of the underlying asset of the reserve
* @param backer The address paying for the backing
* @param amount The amount added as backing
* @param fee The amount paid in fees
*/
event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
/**
* @dev Emitted on supply()
* @param reserve The address of the underlying asset of the reserve
* @param user The address initiating the supply
* @param onBehalfOf The beneficiary of the supply, receiving the aTokens
* @param amount The amount supplied
* @param referralCode The referral code used
*/
event Supply(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint16 indexed referralCode
);
/**
* @dev Emitted on withdraw()
* @param reserve The address of the underlying asset being withdrawn
* @param user The address initiating the withdrawal, owner of aTokens
* @param to The address that will receive the underlying
* @param amount The amount to be withdrawn
*/
event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
/**
* @dev Emitted on borrow() and flashLoan() when debt needs to be opened
* @param reserve The address of the underlying asset being borrowed
* @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
* initiator of the transaction on flashLoan()
* @param onBehalfOf The address that will be getting the debt
* @param amount The amount borrowed out
* @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
* @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
* @param referralCode The referral code used
*/
event Borrow(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
DataTypes.InterestRateMode interestRateMode,
uint256 borrowRate,
uint16 indexed referralCode
);
/**
* @dev Emitted on repay()
* @param reserve The address of the underlying asset of the reserve
* @param user The beneficiary of the repayment, getting his debt reduced
* @param repayer The address of the user initiating the repay(), providing the funds
* @param amount The amount repaid
* @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
*/
event Repay(
address indexed reserve,
address indexed user,
address indexed repayer,
uint256 amount,
bool useATokens
);
/**
* @dev Emitted on swapBorrowRateMode()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user swapping his rate mode
* @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
*/
event SwapBorrowRateMode(
address indexed reserve,
address indexed user,
DataTypes.InterestRateMode interestRateMode
);
/**
* @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
* @param asset The address of the underlying asset of the reserve
* @param totalDebt The total isolation mode debt for the reserve
*/
event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
/**
* @dev Emitted when the user selects a certain asset category for eMode
* @param user The address of the user
* @param categoryId The category id
*/
event UserEModeSet(address indexed user, uint8 categoryId);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
*/
event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
*/
event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on rebalanceStableBorrowRate()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user for which the rebalance has been executed
*/
event RebalanceStableBorrowRate(address indexed reserve, address indexed user);
/**
* @dev Emitted on flashLoan()
* @param target The address of the flash loan receiver contract
* @param initiator The address initiating the flash loan
* @param asset The address of the asset being flash borrowed
* @param amount The amount flash borrowed
* @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
* @param premium The fee flash borrowed
* @param referralCode The referral code used
*/
event FlashLoan(
address indexed target,
address initiator,
address indexed asset,
uint256 amount,
DataTypes.InterestRateMode interestRateMode,
uint256 premium,
uint16 indexed referralCode
);
/**
* @dev Emitted when a borrower is liquidated.
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param liquidatedCollateralAmount The amount of collateral received by the liquidator
* @param liquidator The address of the liquidator
* @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
*/
event LiquidationCall(
address indexed collateralAsset,
address indexed debtAsset,
address indexed user,
uint256 debtToCover,
uint256 liquidatedCollateralAmount,
address liquidator,
bool receiveAToken
);
/**
* @dev Emitted when the state of a reserve is updated.
* @param reserve The address of the underlying asset of the reserve
* @param liquidityRate The next liquidity rate
* @param stableBorrowRate The next stable borrow rate
* @param variableBorrowRate The next variable borrow rate
* @param liquidityIndex The next liquidity index
* @param variableBorrowIndex The next variable borrow index
*/
event ReserveDataUpdated(
address indexed reserve,
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate,
uint256 liquidityIndex,
uint256 variableBorrowIndex
);
/**
* @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
* @param reserve The address of the reserve
* @param amountMinted The amount minted to the treasury
*/
event MintedToTreasury(address indexed reserve, uint256 amountMinted);
/**
* @notice Mints an `amount` of aTokens to the `onBehalfOf`
* @param asset The address of the underlying asset to mint
* @param amount The amount to mint
* @param onBehalfOf The address that will receive the aTokens
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function mintUnbacked(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
/**
* @notice Back the current unbacked underlying with `amount` and pay `fee`.
* @param asset The address of the underlying asset to back
* @param amount The amount to back
* @param fee The amount paid in fees
* @return The backed amount
*/
function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);
/**
* @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
* - E.g. User supplies 100 USDC and gets in return 100 aUSDC
* @param asset The address of the underlying asset to supply
* @param amount The amount to be supplied
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
/**
* @notice Supply with transfer approval of asset to be supplied done via permit function
* see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
* @param asset The address of the underlying asset to supply
* @param amount The amount to be supplied
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param deadline The deadline timestamp that the permit is valid
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param permitV The V parameter of ERC712 permit sig
* @param permitR The R parameter of ERC712 permit sig
* @param permitS The S parameter of ERC712 permit sig
*/
function supplyWithPermit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode,
uint256 deadline,
uint8 permitV,
bytes32 permitR,
bytes32 permitS
) external;
/**
* @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
* E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
* @param asset The address of the underlying asset to withdraw
* @param amount The underlying amount to be withdrawn
* - Send the value type(uint256).max in order to withdraw the whole aToken balance
* @param to The address that will receive the underlying, same as msg.sender if the user
* wants to receive it on his own wallet, or a different address if the beneficiary is a
* different wallet
* @return The final amount withdrawn
*/
function withdraw(address asset, uint256 amount, address to) external returns (uint256);
/**
* @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
* already supplied enough collateral, or he was given enough allowance by a credit delegator on the
* corresponding debt token (StableDebtToken or VariableDebtToken)
* - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
* and 100 stable/variable debt tokens, depending on the `interestRateMode`
* @param asset The address of the underlying asset to borrow
* @param amount The amount to be borrowed
* @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
* @param referralCode The code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
* calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
* if he has been given credit delegation allowance
*/
function borrow(
address asset,
uint256 amount,
uint256 interestRateMode,
uint16 referralCode,
address onBehalfOf
) external;
/**
* @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
* - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @return The final amount repaid
*/
function repay(
address asset,
uint256 amount,
uint256 interestRateMode,
address onBehalfOf
) external returns (uint256);
/**
* @notice Repay with transfer approval of asset to be repaid done via permit function
* see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @param deadline The deadline timestamp that the permit is valid
* @param permitV The V parameter of ERC712 permit sig
* @param permitR The R parameter of ERC712 permit sig
* @param permitS The S parameter of ERC712 permit sig
* @return The final amount repaid
*/
function repayWithPermit(
address asset,
uint256 amount,
uint256 interestRateMode,
address onBehalfOf,
uint256 deadline,
uint8 permitV,
bytes32 permitR,
bytes32 permitS
) external returns (uint256);
/**
* @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
* equivalent debt tokens
* - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
* @dev Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
* balance is not enough to cover the whole debt
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @return The final amount repaid
*/
function repayWithATokens(
address asset,
uint256 amount,
uint256 interestRateMode
) external returns (uint256);
/**
* @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
* @param asset The address of the underlying asset borrowed
* @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
*/
function swapBorrowRateMode(address asset, uint256 interestRateMode) external;
/**
* @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
* - Users can be rebalanced if the following conditions are satisfied:
* 1. Usage ratio is above 95%
* 2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
* much has been borrowed at a stable rate and suppliers are not earning enough
* @param asset The address of the underlying asset borrowed
* @param user The address of the user to be rebalanced
*/
function rebalanceStableBorrowRate(address asset, address user) external;
/**
* @notice Allows suppliers to enable/disable a specific supplied asset as collateral
* @param asset The address of the underlying asset supplied
* @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
*/
function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
/**
* @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
* - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
* a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
*/
function liquidationCall(
address collateralAsset,
address debtAsset,
address user,
uint256 debtToCover,
bool receiveAToken
) external;
/**
* @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
* as long as the amount taken plus a fee is returned.
* @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
* into consideration. For further details please visit https://docs.aave.com/developers/
* @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
* @param assets The addresses of the assets being flash-borrowed
* @param amounts The amounts of the assets being flash-borrowed
* @param interestRateModes Types of the debt to open if the flash loan is not returned:
* 0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
* 1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* 2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* @param onBehalfOf The address that will receive the debt in the case of using on `modes` 1 or 2
* @param params Variadic packed params to pass to the receiver as extra information
* @param referralCode The code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function flashLoan(
address receiverAddress,
address[] calldata assets,
uint256[] calldata amounts,
uint256[] calldata interestRateModes,
address onBehalfOf,
bytes calldata params,
uint16 referralCode
) external;
/**
* @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
* as long as the amount taken plus a fee is returned.
* @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
* into consideration. For further details please visit https://docs.aave.com/developers/
* @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
* @param asset The address of the asset being flash-borrowed
* @param amount The amount of the asset being flash-borrowed
* @param params Variadic packed params to pass to the receiver as extra information
* @param referralCode The code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function flashLoanSimple(
address receiverAddress,
address asset,
uint256 amount,
bytes calldata params,
uint16 referralCode
) external;
/**
* @notice Returns the user account data across all the reserves
* @param user The address of the user
* @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
* @return totalDebtBase The total debt of the user in the base currency used by the price feed
* @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
* @return currentLiquidationThreshold The liquidation threshold of the user
* @return ltv The loan to value of The user
* @return healthFactor The current health factor of the user
*/
function getUserAccountData(
address user
)
external
view
returns (
Submitted on: 2025-09-22 10:57:22
Comments
Log in to comment.
No comments yet.