MultiHopSwap

{{
  "language": "Solidity",
  "sources": {
    "npm/@uniswap/v3-core@1.0.1/contracts/interfaces/IUniswapV3Pool.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import './pool/IUniswapV3PoolImmutables.sol';
import './pool/IUniswapV3PoolState.sol';
import './pool/IUniswapV3PoolDerivedState.sol';
import './pool/IUniswapV3PoolActions.sol';
import './pool/IUniswapV3PoolOwnerActions.sol';
import './pool/IUniswapV3PoolEvents.sol';

/// @title The interface for a Uniswap V3 Pool
/// @notice A Uniswap pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IUniswapV3Pool is
    IUniswapV3PoolImmutables,
    IUniswapV3PoolState,
    IUniswapV3PoolDerivedState,
    IUniswapV3PoolActions,
    IUniswapV3PoolOwnerActions,
    IUniswapV3PoolEvents
{

}
"
    },
    "npm/@uniswap/v3-core@1.0.1/contracts/interfaces/pool/IUniswapV3PoolActions.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IUniswapV3PoolActions {
    /// @notice Sets the initial price for the pool
    /// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
    /// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
    function initialize(uint160 sqrtPriceX96) external;

    /// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
    /// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
    /// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
    /// on tickLower, tickUpper, the amount of liquidity, and the current price.
    /// @param recipient The address for which the liquidity will be created
    /// @param tickLower The lower tick of the position in which to add liquidity
    /// @param tickUpper The upper tick of the position in which to add liquidity
    /// @param amount The amount of liquidity to mint
    /// @param data Any data that should be passed through to the callback
    /// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
    /// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
    function mint(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount,
        bytes calldata data
    ) external returns (uint256 amount0, uint256 amount1);

    /// @notice Collects tokens owed to a position
    /// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
    /// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
    /// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
    /// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
    /// @param recipient The address which should receive the fees collected
    /// @param tickLower The lower tick of the position for which to collect fees
    /// @param tickUpper The upper tick of the position for which to collect fees
    /// @param amount0Requested How much token0 should be withdrawn from the fees owed
    /// @param amount1Requested How much token1 should be withdrawn from the fees owed
    /// @return amount0 The amount of fees collected in token0
    /// @return amount1 The amount of fees collected in token1
    function collect(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);

    /// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
    /// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
    /// @dev Fees must be collected separately via a call to #collect
    /// @param tickLower The lower tick of the position for which to burn liquidity
    /// @param tickUpper The upper tick of the position for which to burn liquidity
    /// @param amount How much liquidity to burn
    /// @return amount0 The amount of token0 sent to the recipient
    /// @return amount1 The amount of token1 sent to the recipient
    function burn(
        int24 tickLower,
        int24 tickUpper,
        uint128 amount
    ) external returns (uint256 amount0, uint256 amount1);

    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);

    /// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
    /// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
    /// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
    /// with 0 amount{0,1} and sending the donation amount(s) from the callback
    /// @param recipient The address which will receive the token0 and token1 amounts
    /// @param amount0 The amount of token0 to send
    /// @param amount1 The amount of token1 to send
    /// @param data Any data to be passed through to the callback
    function flash(
        address recipient,
        uint256 amount0,
        uint256 amount1,
        bytes calldata data
    ) external;

    /// @notice Increase the maximum number of price and liquidity observations that this pool will store
    /// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
    /// the input observationCardinalityNext.
    /// @param observationCardinalityNext The desired minimum number of observations for the pool to store
    function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}
"
    },
    "npm/@uniswap/v3-core@1.0.1/contracts/interfaces/pool/IUniswapV3PoolDerivedState.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IUniswapV3PoolDerivedState {
    /// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
    /// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
    /// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
    /// you must call it with secondsAgos = [3600, 0].
    /// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
    /// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
    /// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
    /// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
    /// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
    /// timestamp
    function observe(uint32[] calldata secondsAgos)
        external
        view
        returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);

    /// @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
    /// @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
    /// I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
    /// snapshot is taken and the second snapshot is taken.
    /// @param tickLower The lower tick of the range
    /// @param tickUpper The upper tick of the range
    /// @return tickCumulativeInside The snapshot of the tick accumulator for the range
    /// @return secondsPerLiquidityInsideX128 The snapshot of seconds per liquidity for the range
    /// @return secondsInside The snapshot of seconds per liquidity for the range
    function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
        external
        view
        returns (
            int56 tickCumulativeInside,
            uint160 secondsPerLiquidityInsideX128,
            uint32 secondsInside
        );
}
"
    },
    "npm/@uniswap/v3-core@1.0.1/contracts/interfaces/pool/IUniswapV3PoolEvents.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Events emitted by a pool
/// @notice Contains all events emitted by the pool
interface IUniswapV3PoolEvents {
    /// @notice Emitted exactly once by a pool when #initialize is first called on the pool
    /// @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
    /// @param sqrtPriceX96 The initial sqrt price of the pool, as a Q64.96
    /// @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
    event Initialize(uint160 sqrtPriceX96, int24 tick);

    /// @notice Emitted when liquidity is minted for a given position
    /// @param sender The address that minted the liquidity
    /// @param owner The owner of the position and recipient of any minted liquidity
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount The amount of liquidity minted to the position range
    /// @param amount0 How much token0 was required for the minted liquidity
    /// @param amount1 How much token1 was required for the minted liquidity
    event Mint(
        address sender,
        address indexed owner,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount,
        uint256 amount0,
        uint256 amount1
    );

    /// @notice Emitted when fees are collected by the owner of a position
    /// @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
    /// @param owner The owner of the position for which fees are collected
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount0 The amount of token0 fees collected
    /// @param amount1 The amount of token1 fees collected
    event Collect(
        address indexed owner,
        address recipient,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount0,
        uint128 amount1
    );

    /// @notice Emitted when a position's liquidity is removed
    /// @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
    /// @param owner The owner of the position for which liquidity is removed
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount The amount of liquidity to remove
    /// @param amount0 The amount of token0 withdrawn
    /// @param amount1 The amount of token1 withdrawn
    event Burn(
        address indexed owner,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount,
        uint256 amount0,
        uint256 amount1
    );

    /// @notice Emitted by the pool for any swaps between token0 and token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the output of the swap
    /// @param amount0 The delta of the token0 balance of the pool
    /// @param amount1 The delta of the token1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of price of the pool after the swap
    event Swap(
        address indexed sender,
        address indexed recipient,
        int256 amount0,
        int256 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick
    );

    /// @notice Emitted by the pool for any flashes of token0/token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the tokens from flash
    /// @param amount0 The amount of token0 that was flashed
    /// @param amount1 The amount of token1 that was flashed
    /// @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
    /// @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
    event Flash(
        address indexed sender,
        address indexed recipient,
        uint256 amount0,
        uint256 amount1,
        uint256 paid0,
        uint256 paid1
    );

    /// @notice Emitted by the pool for increases to the number of observations that can be stored
    /// @dev observationCardinalityNext is not the observation cardinality until an observation is written at the index
    /// just before a mint/swap/burn.
    /// @param observationCardinalityNextOld The previous value of the next observation cardinality
    /// @param observationCardinalityNextNew The updated value of the next observation cardinality
    event IncreaseObservationCardinalityNext(
        uint16 observationCardinalityNextOld,
        uint16 observationCardinalityNextNew
    );

    /// @notice Emitted when the protocol fee is changed by the pool
    /// @param feeProtocol0Old The previous value of the token0 protocol fee
    /// @param feeProtocol1Old The previous value of the token1 protocol fee
    /// @param feeProtocol0New The updated value of the token0 protocol fee
    /// @param feeProtocol1New The updated value of the token1 protocol fee
    event SetFeeProtocol(uint8 feeProtocol0Old, uint8 feeProtocol1Old, uint8 feeProtocol0New, uint8 feeProtocol1New);

    /// @notice Emitted when the collected protocol fees are withdrawn by the factory owner
    /// @param sender The address that collects the protocol fees
    /// @param recipient The address that receives the collected protocol fees
    /// @param amount0 The amount of token0 protocol fees that is withdrawn
    /// @param amount0 The amount of token1 protocol fees that is withdrawn
    event CollectProtocol(address indexed sender, address indexed recipient, uint128 amount0, uint128 amount1);
}
"
    },
    "npm/@uniswap/v3-core@1.0.1/contracts/interfaces/pool/IUniswapV3PoolImmutables.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IUniswapV3PoolImmutables {
    /// @notice The contract that deployed the pool, which must adhere to the IUniswapV3Factory interface
    /// @return The contract address
    function factory() external view returns (address);

    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);

    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);

    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);

    /// @notice The pool tick spacing
    /// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
    /// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
    /// This value is an int24 to avoid casting even though it is always positive.
    /// @return The tick spacing
    function tickSpacing() external view returns (int24);

    /// @notice The maximum amount of position liquidity that can use any tick in the range
    /// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
    /// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
    /// @return The max amount of liquidity per tick
    function maxLiquidityPerTick() external view returns (uint128);
}
"
    },
    "npm/@uniswap/v3-core@1.0.1/contracts/interfaces/pool/IUniswapV3PoolOwnerActions.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Permissioned pool actions
/// @notice Contains pool methods that may only be called by the factory owner
interface IUniswapV3PoolOwnerActions {
    /// @notice Set the denominator of the protocol's % share of the fees
    /// @param feeProtocol0 new protocol fee for token0 of the pool
    /// @param feeProtocol1 new protocol fee for token1 of the pool
    function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external;

    /// @notice Collect the protocol fee accrued to the pool
    /// @param recipient The address to which collected protocol fees should be sent
    /// @param amount0Requested The maximum amount of token0 to send, can be 0 to collect fees in only token1
    /// @param amount1Requested The maximum amount of token1 to send, can be 0 to collect fees in only token0
    /// @return amount0 The protocol fee collected in token0
    /// @return amount1 The protocol fee collected in token1
    function collectProtocol(
        address recipient,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);
}
"
    },
    "npm/@uniswap/v3-core@1.0.1/contracts/interfaces/pool/IUniswapV3PoolState.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IUniswapV3PoolState {
    /// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
    /// when accessed externally.
    /// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
    /// tick The current tick of the pool, i.e. according to the last tick transition that was run.
    /// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
    /// boundary.
    /// observationIndex The index of the last oracle observation that was written,
    /// observationCardinality The current maximum number of observations stored in the pool,
    /// observationCardinalityNext The next maximum number of observations, to be updated when the observation.
    /// feeProtocol The protocol fee for both tokens of the pool.
    /// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
    /// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
    /// unlocked Whether the pool is currently locked to reentrancy
    function slot0()
        external
        view
        returns (
            uint160 sqrtPriceX96,
            int24 tick,
            uint16 observationIndex,
            uint16 observationCardinality,
            uint16 observationCardinalityNext,
            uint8 feeProtocol,
            bool unlocked
        );

    /// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal0X128() external view returns (uint256);

    /// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal1X128() external view returns (uint256);

    /// @notice The amounts of token0 and token1 that are owed to the protocol
    /// @dev Protocol fees will never exceed uint128 max in either token
    function protocolFees() external view returns (uint128 token0, uint128 token1);

    /// @notice The currently in range liquidity available to the pool
    /// @dev This value has no relationship to the total liquidity across all ticks
    function liquidity() external view returns (uint128);

    /// @notice Look up information about a specific tick in the pool
    /// @param tick The tick to look up
    /// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
    /// tick upper,
    /// liquidityNet how much liquidity changes when the pool price crosses the tick,
    /// feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
    /// feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
    /// tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
    /// secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
    /// secondsOutside the seconds spent on the other side of the tick from the current tick,
    /// initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
    /// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
    /// In addition, these values are only relative and must be used only in comparison to previous snapshots for
    /// a specific position.
    function ticks(int24 tick)
        external
        view
        returns (
            uint128 liquidityGross,
            int128 liquidityNet,
            uint256 feeGrowthOutside0X128,
            uint256 feeGrowthOutside1X128,
            int56 tickCumulativeOutside,
            uint160 secondsPerLiquidityOutsideX128,
            uint32 secondsOutside,
            bool initialized
        );

    /// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
    function tickBitmap(int16 wordPosition) external view returns (uint256);

    /// @notice Returns the information about a position by the position's key
    /// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
    /// @return _liquidity The amount of liquidity in the position,
    /// Returns feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
    /// Returns feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
    /// Returns tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
    /// Returns tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
    function positions(bytes32 key)
        external
        view
        returns (
            uint128 _liquidity,
            uint256 feeGrowthInside0LastX128,
            uint256 feeGrowthInside1LastX128,
            uint128 tokensOwed0,
            uint128 tokensOwed1
        );

    /// @notice Returns data about a specific observation index
    /// @param index The element of the observations array to fetch
    /// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
    /// ago, rather than at a specific index in the array.
    /// @return blockTimestamp The timestamp of the observation,
    /// Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
    /// Returns secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
    /// Returns initialized whether the observation has been initialized and the values are safe to use
    function observations(uint256 index)
        external
        view
        returns (
            uint32 blockTimestamp,
            int56 tickCumulative,
            uint160 secondsPerLiquidityCumulativeX128,
            bool initialized
        );
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/interfaces/IExtsload.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice Interface for functions to access any storage slot in a contract
interface IExtsload {
    /// @notice Called by external contracts to access granular pool state
    /// @param slot Key of slot to sload
    /// @return value The value of the slot as bytes32
    function extsload(bytes32 slot) external view returns (bytes32 value);

    /// @notice Called by external contracts to access granular pool state
    /// @param startSlot Key of slot to start sloading from
    /// @param nSlots Number of slots to load into return value
    /// @return values List of loaded values.
    function extsload(bytes32 startSlot, uint256 nSlots) external view returns (bytes32[] memory values);

    /// @notice Called by external contracts to access sparse pool state
    /// @param slots List of slots to SLOAD from.
    /// @return values List of loaded values.
    function extsload(bytes32[] calldata slots) external view returns (bytes32[] memory values);
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/interfaces/IExttload.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;

/// @notice Interface for functions to access any transient storage slot in a contract
interface IExttload {
    /// @notice Called by external contracts to access transient storage of the contract
    /// @param slot Key of slot to tload
    /// @return value The value of the slot as bytes32
    function exttload(bytes32 slot) external view returns (bytes32 value);

    /// @notice Called by external contracts to access sparse transient pool state
    /// @param slots List of slots to tload
    /// @return values List of loaded values
    function exttload(bytes32[] calldata slots) external view returns (bytes32[] memory values);
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/interfaces/IHooks.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {PoolKey} from "../types/PoolKey.sol";
import {BalanceDelta} from "../types/BalanceDelta.sol";
import {ModifyLiquidityParams, SwapParams} from "../types/PoolOperation.sol";
import {BeforeSwapDelta} from "../types/BeforeSwapDelta.sol";

/// @notice V4 decides whether to invoke specific hooks by inspecting the least significant bits
/// of the address that the hooks contract is deployed to.
/// For example, a hooks contract deployed to address: 0x0000000000000000000000000000000000002400
/// has the lowest bits '10 0100 0000 0000' which would cause the 'before initialize' and 'after add liquidity' hooks to be used.
/// See the Hooks library for the full spec.
/// @dev Should only be callable by the v4 PoolManager.
interface IHooks {
    /// @notice The hook called before the state of a pool is initialized
    /// @param sender The initial msg.sender for the initialize call
    /// @param key The key for the pool being initialized
    /// @param sqrtPriceX96 The sqrt(price) of the pool as a Q64.96
    /// @return bytes4 The function selector for the hook
    function beforeInitialize(address sender, PoolKey calldata key, uint160 sqrtPriceX96) external returns (bytes4);

    /// @notice The hook called after the state of a pool is initialized
    /// @param sender The initial msg.sender for the initialize call
    /// @param key The key for the pool being initialized
    /// @param sqrtPriceX96 The sqrt(price) of the pool as a Q64.96
    /// @param tick The current tick after the state of a pool is initialized
    /// @return bytes4 The function selector for the hook
    function afterInitialize(address sender, PoolKey calldata key, uint160 sqrtPriceX96, int24 tick)
        external
        returns (bytes4);

    /// @notice The hook called before liquidity is added
    /// @param sender The initial msg.sender for the add liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for adding liquidity
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function beforeAddLiquidity(
        address sender,
        PoolKey calldata key,
        ModifyLiquidityParams calldata params,
        bytes calldata hookData
    ) external returns (bytes4);

    /// @notice The hook called after liquidity is added
    /// @param sender The initial msg.sender for the add liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for adding liquidity
    /// @param delta The caller's balance delta after adding liquidity; the sum of principal delta, fees accrued, and hook delta
    /// @param feesAccrued The fees accrued since the last time fees were collected from this position
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return BalanceDelta The hook's delta in token0 and token1. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    function afterAddLiquidity(
        address sender,
        PoolKey calldata key,
        ModifyLiquidityParams calldata params,
        BalanceDelta delta,
        BalanceDelta feesAccrued,
        bytes calldata hookData
    ) external returns (bytes4, BalanceDelta);

    /// @notice The hook called before liquidity is removed
    /// @param sender The initial msg.sender for the remove liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for removing liquidity
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function beforeRemoveLiquidity(
        address sender,
        PoolKey calldata key,
        ModifyLiquidityParams calldata params,
        bytes calldata hookData
    ) external returns (bytes4);

    /// @notice The hook called after liquidity is removed
    /// @param sender The initial msg.sender for the remove liquidity call
    /// @param key The key for the pool
    /// @param params The parameters for removing liquidity
    /// @param delta The caller's balance delta after removing liquidity; the sum of principal delta, fees accrued, and hook delta
    /// @param feesAccrued The fees accrued since the last time fees were collected from this position
    /// @param hookData Arbitrary data handed into the PoolManager by the liquidity provider to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return BalanceDelta The hook's delta in token0 and token1. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    function afterRemoveLiquidity(
        address sender,
        PoolKey calldata key,
        ModifyLiquidityParams calldata params,
        BalanceDelta delta,
        BalanceDelta feesAccrued,
        bytes calldata hookData
    ) external returns (bytes4, BalanceDelta);

    /// @notice The hook called before a swap
    /// @param sender The initial msg.sender for the swap call
    /// @param key The key for the pool
    /// @param params The parameters for the swap
    /// @param hookData Arbitrary data handed into the PoolManager by the swapper to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return BeforeSwapDelta The hook's delta in specified and unspecified currencies. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    /// @return uint24 Optionally override the lp fee, only used if three conditions are met: 1. the Pool has a dynamic fee, 2. the value's 2nd highest bit is set (23rd bit, 0x400000), and 3. the value is less than or equal to the maximum fee (1 million)
    function beforeSwap(address sender, PoolKey calldata key, SwapParams calldata params, bytes calldata hookData)
        external
        returns (bytes4, BeforeSwapDelta, uint24);

    /// @notice The hook called after a swap
    /// @param sender The initial msg.sender for the swap call
    /// @param key The key for the pool
    /// @param params The parameters for the swap
    /// @param delta The amount owed to the caller (positive) or owed to the pool (negative)
    /// @param hookData Arbitrary data handed into the PoolManager by the swapper to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    /// @return int128 The hook's delta in unspecified currency. Positive: the hook is owed/took currency, negative: the hook owes/sent currency
    function afterSwap(
        address sender,
        PoolKey calldata key,
        SwapParams calldata params,
        BalanceDelta delta,
        bytes calldata hookData
    ) external returns (bytes4, int128);

    /// @notice The hook called before donate
    /// @param sender The initial msg.sender for the donate call
    /// @param key The key for the pool
    /// @param amount0 The amount of token0 being donated
    /// @param amount1 The amount of token1 being donated
    /// @param hookData Arbitrary data handed into the PoolManager by the donor to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function beforeDonate(
        address sender,
        PoolKey calldata key,
        uint256 amount0,
        uint256 amount1,
        bytes calldata hookData
    ) external returns (bytes4);

    /// @notice The hook called after donate
    /// @param sender The initial msg.sender for the donate call
    /// @param key The key for the pool
    /// @param amount0 The amount of token0 being donated
    /// @param amount1 The amount of token1 being donated
    /// @param hookData Arbitrary data handed into the PoolManager by the donor to be be passed on to the hook
    /// @return bytes4 The function selector for the hook
    function afterDonate(
        address sender,
        PoolKey calldata key,
        uint256 amount0,
        uint256 amount1,
        bytes calldata hookData
    ) external returns (bytes4);
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/interfaces/IPoolManager.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;

import {Currency} from "../types/Currency.sol";
import {PoolKey} from "../types/PoolKey.sol";
import {IHooks} from "./IHooks.sol";
import {IERC6909Claims} from "./external/IERC6909Claims.sol";
import {IProtocolFees} from "./IProtocolFees.sol";
import {BalanceDelta} from "../types/BalanceDelta.sol";
import {PoolId} from "../types/PoolId.sol";
import {IExtsload} from "./IExtsload.sol";
import {IExttload} from "./IExttload.sol";
import {ModifyLiquidityParams, SwapParams} from "../types/PoolOperation.sol";

/// @notice Interface for the PoolManager
interface IPoolManager is IProtocolFees, IERC6909Claims, IExtsload, IExttload {
    /// @notice Thrown when a currency is not netted out after the contract is unlocked
    error CurrencyNotSettled();

    /// @notice Thrown when trying to interact with a non-initialized pool
    error PoolNotInitialized();

    /// @notice Thrown when unlock is called, but the contract is already unlocked
    error AlreadyUnlocked();

    /// @notice Thrown when a function is called that requires the contract to be unlocked, but it is not
    error ManagerLocked();

    /// @notice Pools are limited to type(int16).max tickSpacing in #initialize, to prevent overflow
    error TickSpacingTooLarge(int24 tickSpacing);

    /// @notice Pools must have a positive non-zero tickSpacing passed to #initialize
    error TickSpacingTooSmall(int24 tickSpacing);

    /// @notice PoolKey must have currencies where address(currency0) < address(currency1)
    error CurrenciesOutOfOrderOrEqual(address currency0, address currency1);

    /// @notice Thrown when a call to updateDynamicLPFee is made by an address that is not the hook,
    /// or on a pool that does not have a dynamic swap fee.
    error UnauthorizedDynamicLPFeeUpdate();

    /// @notice Thrown when trying to swap amount of 0
    error SwapAmountCannotBeZero();

    ///@notice Thrown when native currency is passed to a non native settlement
    error NonzeroNativeValue();

    /// @notice Thrown when `clear` is called with an amount that is not exactly equal to the open currency delta.
    error MustClearExactPositiveDelta();

    /// @notice Emitted when a new pool is initialized
    /// @param id The abi encoded hash of the pool key struct for the new pool
    /// @param currency0 The first currency of the pool by address sort order
    /// @param currency1 The second currency of the pool by address sort order
    /// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// @param tickSpacing The minimum number of ticks between initialized ticks
    /// @param hooks The hooks contract address for the pool, or address(0) if none
    /// @param sqrtPriceX96 The price of the pool on initialization
    /// @param tick The initial tick of the pool corresponding to the initialized price
    event Initialize(
        PoolId indexed id,
        Currency indexed currency0,
        Currency indexed currency1,
        uint24 fee,
        int24 tickSpacing,
        IHooks hooks,
        uint160 sqrtPriceX96,
        int24 tick
    );

    /// @notice Emitted when a liquidity position is modified
    /// @param id The abi encoded hash of the pool key struct for the pool that was modified
    /// @param sender The address that modified the pool
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param liquidityDelta The amount of liquidity that was added or removed
    /// @param salt The extra data to make positions unique
    event ModifyLiquidity(
        PoolId indexed id, address indexed sender, int24 tickLower, int24 tickUpper, int256 liquidityDelta, bytes32 salt
    );

    /// @notice Emitted for swaps between currency0 and currency1
    /// @param id The abi encoded hash of the pool key struct for the pool that was modified
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param amount0 The delta of the currency0 balance of the pool
    /// @param amount1 The delta of the currency1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of the price of the pool after the swap
    /// @param fee The swap fee in hundredths of a bip
    event Swap(
        PoolId indexed id,
        address indexed sender,
        int128 amount0,
        int128 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick,
        uint24 fee
    );

    /// @notice Emitted for donations
    /// @param id The abi encoded hash of the pool key struct for the pool that was donated to
    /// @param sender The address that initiated the donate call
    /// @param amount0 The amount donated in currency0
    /// @param amount1 The amount donated in currency1
    event Donate(PoolId indexed id, address indexed sender, uint256 amount0, uint256 amount1);

    /// @notice All interactions on the contract that account deltas require unlocking. A caller that calls `unlock` must implement
    /// `IUnlockCallback(msg.sender).unlockCallback(data)`, where they interact with the remaining functions on this contract.
    /// @dev The only functions callable without an unlocking are `initialize` and `updateDynamicLPFee`
    /// @param data Any data to pass to the callback, via `IUnlockCallback(msg.sender).unlockCallback(data)`
    /// @return The data returned by the call to `IUnlockCallback(msg.sender).unlockCallback(data)`
    function unlock(bytes calldata data) external returns (bytes memory);

    /// @notice Initialize the state for a given pool ID
    /// @dev A swap fee totaling MAX_SWAP_FEE (100%) makes exact output swaps impossible since the input is entirely consumed by the fee
    /// @param key The pool key for the pool to initialize
    /// @param sqrtPriceX96 The initial square root price
    /// @return tick The initial tick of the pool
    function initialize(PoolKey memory key, uint160 sqrtPriceX96) external returns (int24 tick);

    /// @notice Modify the liquidity for the given pool
    /// @dev Poke by calling with a zero liquidityDelta
    /// @param key The pool to modify liquidity in
    /// @param params The parameters for modifying the liquidity
    /// @param hookData The data to pass through to the add/removeLiquidity hooks
    /// @return callerDelta The balance delta of the caller of modifyLiquidity. This is the total of both principal, fee deltas, and hook deltas if applicable
    /// @return feesAccrued The balance delta of the fees generated in the liquidity range. Returned for informational purposes
    /// @dev Note that feesAccrued can be artificially inflated by a malicious actor and integrators should be careful using the value
    /// For pools with a single liquidity position, actors can donate to themselves to inflate feeGrowthGlobal (and consequently feesAccrued)
    /// atomically donating and collecting fees in the same unlockCallback may make the inflated value more extreme
    function modifyLiquidity(PoolKey memory key, ModifyLiquidityParams memory params, bytes calldata hookData)
        external
        returns (BalanceDelta callerDelta, BalanceDelta feesAccrued);

    /// @notice Swap against the given pool
    /// @param key The pool to swap in
    /// @param params The parameters for swapping
    /// @param hookData The data to pass through to the swap hooks
    /// @return swapDelta The balance delta of the address swapping
    /// @dev Swapping on low liquidity pools may cause unexpected swap amounts when liquidity available is less than amountSpecified.
    /// Additionally note that if interacting with hooks that have the BEFORE_SWAP_RETURNS_DELTA_FLAG or AFTER_SWAP_RETURNS_DELTA_FLAG
    /// the hook may alter the swap input/output. Integrators should perform checks on the returned swapDelta.
    function swap(PoolKey memory key, SwapParams memory params, bytes calldata hookData)
        external
        returns (BalanceDelta swapDelta);

    /// @notice Donate the given currency amounts to the in-range liquidity providers of a pool
    /// @dev Calls to donate can be frontrun adding just-in-time liquidity, with the aim of receiving a portion donated funds.
    /// Donors should keep this in mind when designing donation mechanisms.
    /// @dev This function donates to in-range LPs at slot0.tick. In certain edge-cases of the swap algorithm, the `sqrtPrice` of
    /// a pool can be at the lower boundary of tick `n`, but the `slot0.tick` of the pool is already `n - 1`. In this case a call to
    /// `donate` would donate to tick `n - 1` (slot0.tick) not tick `n` (getTickAtSqrtPrice(slot0.sqrtPriceX96)).
    /// Read the comments in `Pool.swap()` for more information about this.
    /// @param key The key of the pool to donate to
    /// @param amount0 The amount of currency0 to donate
    /// @param amount1 The amount of currency1 to donate
    /// @param hookData The data to pass through to the donate hooks
    /// @return BalanceDelta The delta of the caller after the donate
    function donate(PoolKey memory key, uint256 amount0, uint256 amount1, bytes calldata hookData)
        external
        returns (BalanceDelta);

    /// @notice Writes the current ERC20 balance of the specified currency to transient storage
    /// This is used to checkpoint balances for the manager and derive deltas for the caller.
    /// @dev This MUST be called before any ERC20 tokens are sent into the contract, but can be skipped
    /// for native tokens because the amount to settle is determined by the sent value.
    /// However, if an ERC20 token has been synced and not settled, and the caller instead wants to settle
    /// native funds, this function can be called with the native currency to then be able to settle the native currency
    function sync(Currency currency) external;

    /// @notice Called by the user to net out some value owed to the user
    /// @dev Will revert if the requested amount is not available, consider using `mint` instead
    /// @dev Can also be used as a mechanism for free flash loans
    /// @param currency The currency to withdraw from the pool manager
    /// @param to The address to withdraw to
    /// @param amount The amount of currency to withdraw
    function take(Currency currency, address to, uint256 amount) external;

    /// @notice Called by the user to pay what is owed
    /// @return paid The amount of currency settled
    function settle() external payable returns (uint256 paid);

    /// @notice Called by the user to pay on behalf of another address
    /// @param recipient The address to credit for the payment
    /// @return paid The amount of currency settled
    function settleFor(address recipient) external payable returns (uint256 paid);

    /// @notice WARNING - Any currency that is cleared, will be non-retrievable, and locked in the contract permanently.
    /// A call to clear will zero out a positive balance WITHOUT a corresponding transfer.
    /// @dev This could be used to clear a balance that is considered dust.
    /// Additionally, the amount must be the exact positive balance. This is to enforce that the caller is aware of the amount being cleared.
    function clear(Currency currency, uint256 amount) external;

    /// @notice Called by the user to move value into ERC6909 balance
    /// @param to The address to mint the tokens to
    /// @param id The currency address to mint to ERC6909s, as a uint256
    /// @param amount The amount of currency to mint
    /// @dev The id is converted to a uint160 to correspond to a currency address
    /// If the upper 12 bytes are not 0, they will be 0-ed out
    function mint(address to, uint256 id, uint256 amount) external;

    /// @notice Called by the user to move value from ERC6909 balance
    /// @param from The address to burn the tokens from
    /// @param id The currency address to burn from ERC6909s, as a uint256
    /// @param amount The amount of currency to burn
    /// @dev The id is converted to a uint160 to correspond to a currency address
    /// If the upper 12 bytes are not 0, they will be 0-ed out
    function burn(address from, uint256 id, uint256 amount) external;

    /// @notice Updates the pools lp fees for the a pool that has enabled dynamic lp fees.
    /// @dev A swap fee totaling MAX_SWAP_FEE (100%) makes exact output swaps impossible since the input is entirely consumed by the fee
    /// @param key The key of the pool to update dynamic LP fees for
    /// @param newDynamicLPFee The new dynamic pool LP fee
    function updateDynamicLPFee(PoolKey memory key, uint24 newDynamicLPFee) external;
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/interfaces/IProtocolFees.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Currency} from "../types/Currency.sol";
import {PoolId} from "../types/PoolId.sol";
import {PoolKey} from "../types/PoolKey.sol";

/// @notice Interface for all protocol-fee related functions in the pool manager
interface IProtocolFees {
    /// @notice Thrown when protocol fee is set too high
    error ProtocolFeeTooLarge(uint24 fee);

    /// @notice Thrown when collectProtocolFees or setProtocolFee is not called by the controller.
    error InvalidCaller();

    /// @notice Thrown when collectProtocolFees is attempted on a token that is synced.
    error ProtocolFeeCurrencySynced();

    /// @notice Emitted when the protocol fee controller address is updated in setProtocolFeeController.
    event ProtocolFeeControllerUpdated(address indexed protocolFeeController);

    /// @notice Emitted when the protocol fee is updated for a pool.
    event ProtocolFeeUpdated(PoolId indexed id, uint24 protocolFee);

    /// @notice Given a currency address, returns the protocol fees accrued in that currency
    /// @param currency The currency to check
    /// @return amount The amount of protocol fees accrued in the currency
    function protocolFeesAccrued(Currency currency) external view returns (uint256 amount);

    /// @notice Sets the protocol fee for the given pool
    /// @param key The key of the pool to set a protocol fee for
    /// @param newProtocolFee The fee to set
    function setProtocolFee(PoolKey memory key, uint24 newProtocolFee) external;

    /// @notice Sets the protocol fee controller
    /// @param controller The new protocol fee controller
    function setProtocolFeeController(address controller) external;

    /// @notice Collects the protocol fees for a given recipient and currency, returning the amount collected
    /// @dev This will revert if the contract is unlocked
    /// @param recipient The address to receive the protocol fees
    /// @param currency The currency to withdraw
    /// @param amount The amount of currency to withdraw
    /// @return amountCollected The amount of currency successfully withdrawn
    function collectProtocolFees(address recipient, Currency currency, uint256 amount)
        external
        returns (uint256 amountCollected);

    /// @notice Returns the current protocol fee controller address
    /// @return address The current protocol fee controller address
    function protocolFeeController() external view returns (address);
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/interfaces/external/IERC20Minimal.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title Minimal ERC20 interface for Uniswap
/// @notice Contains a subset of the full ERC20 interface that is used in Uniswap V3
interface IERC20Minimal {
    /// @notice Returns an account's balance in the token
    /// @param account The account for which to look up the number of tokens it has, i.e. its balance
    /// @return The number of tokens held by the account
    function balanceOf(address account) external view returns (uint256);

    /// @notice Transfers the amount of token from the `msg.sender` to the recipient
    /// @param recipient The account that will receive the amount transferred
    /// @param amount The number of tokens to send from the sender to the recipient
    /// @return Returns true for a successful transfer, false for an unsuccessful transfer
    function transfer(address recipient, uint256 amount) external returns (bool);

    /// @notice Returns the current allowance given to a spender by an owner
    /// @param owner The account of the token owner
    /// @param spender The account of the token spender
    /// @return The current allowance granted by `owner` to `spender`
    function allowance(address owner, address spender) external view returns (uint256);

    /// @notice Sets the allowance of a spender from the `msg.sender` to the value `amount`
    /// @param spender The account which will be allowed to spend a given amount of the owners tokens
    /// @param amount The amount of tokens allowed to be used by `spender`
    /// @return Returns true for a successful approval, false for unsuccessful
    function approve(address spender, uint256 amount) external returns (bool);

    /// @notice Transfers `amount` tokens from `sender` to `recipient` up to the allowance given to the `msg.sender`
    /// @param sender The account from which the transfer will be initiated
    /// @param recipient The recipient of the transfer
    /// @param amount The amount of the transfer
    /// @return Returns true for a successful transfer, false for unsuccessful
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /// @notice Event emitted when tokens are transferred from one address to another, either via `#transfer` or `#transferFrom`.
    /// @param from The account from which the tokens were sent, i.e. the balance decreased
    /// @param to The account to which the tokens were sent, i.e. the balance increased
    /// @param value The amount of tokens that were transferred
    event Transfer(address indexed from, address indexed to, uint256 value);

    /// @notice Event emitted when the approval amount for the spender of a given owner's tokens changes.
    /// @param owner The account that approved spending of its tokens
    /// @param spender The account for which the spending allowance was modified
    /// @param value The new allowance from the owner to the spender
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/interfaces/external/IERC6909Claims.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice Interface for claims over a contract balance, wrapped as a ERC6909
interface IERC6909Claims {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event OperatorSet(address indexed owner, address indexed operator, bool approved);

    event Approval(address indexed owner, address indexed spender, uint256 indexed id, uint256 amount);

    event Transfer(address caller, address indexed from, address indexed to, uint256 indexed id, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                                 FUNCTIONS
    //////////////////////////////////////////////////////////////*/

    /// @notice Owner balance of an id.
    /// @param owner The address of the owner.
    /// @param id The id of the token.
    /// @return amount The balance of the token.
    function balanceOf(address owner, uint256 id) external view returns (uint256 amount);

    /// @notice Spender allowance of an id.
    /// @param owner The address of the owner.
    /// @param spender The address of the spender.
    /// @param id The id of the token.
    /// @return amount The allowance of the token.
    function allowance(address owner, address spender, uint256 id) external view returns (uint256 amount);

    /// @notice Checks if a spender is approved by an owner as an operator
    /// @param owner The address of the owner.
    /// @param spender The address of the spender.
    /// @return approved The approval status.
    function isOperator(address owner, address spender) external view returns (bool approved);

    /// @notice Transfers an amount of an id from the caller to a receiver.
    /// @param receiver The address of the receiver.
    /// @param id The id of the token.
    /// @param amount The amount of the token.
    /// @return bool True, always, unless the function reverts
    function transfer(address receiver, uint256 id, uint256 amount) external returns (bool);

    /// @notice Transfers an amount of an id from a sender to a receiver.
    /// @param sender The address of the sender.
    /// @param receiver The address of the receiver.
    /// @param id The id of the token.
    /// @param amount The amount of the token.
    /// @return bool True, always, unless the function reverts
    function transferFrom(address sender, address receiver, uint256 id, uint256 amount) external returns (bool);

    /// @notice Approves an amount of an id to a spender.
    /// @param spender The address of the spender.
    /// @param id The id of the token.
    /// @param amount The amount of the token.
    /// @return bool True, always
    function approve(address spender, uint256 id, uint256 amount) external returns (bool);

    /// @notice Sets or removes an operator for the caller.
    /// @param operator The address of the operator.
    /// @param approved The approval status.
    /// @return bool True, always
    function setOperator(address operator, bool approved) external returns (bool);
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/libraries/CustomRevert.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title Library for reverting with custom errors efficiently
/// @notice Contains functions for reverting with custom errors with different argument types efficiently
/// @dev To use this library, declare `using CustomRevert for bytes4;` and replace `revert CustomError()` with
/// `CustomError.selector.revertWith()`
/// @dev The functions may tamper with the free memory pointer but it is fine since the call context is exited immediately
library CustomRevert {
    /// @dev ERC-7751 error for wrapping bubbled up reverts
    error WrappedError(address target, bytes4 selector, bytes reason, bytes details);

    /// @dev Reverts with the selector of a custom error in the scratch space
    function revertWith(bytes4 selector) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            revert(0, 0x04)
        }
    }

    /// @dev Reverts with a custom error with an address argument in the scratch space
    function revertWith(bytes4 selector, address addr) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, and(addr, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(0, 0x24)
        }
    }

    /// @dev Reverts with a custom error with an int24 argument in the scratch space
    function revertWith(bytes4 selector, int24 value) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, signextend(2, value))
            revert(0, 0x24)
        }
    }

    /// @dev Reverts with a custom error with a uint160 argument in the scratch space
    function revertWith(bytes4 selector, uint160 value) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, and(value, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(0, 0x24)
        }
    }

    /// @dev Reverts with a custom error with two int24 arguments
    function revertWith(bytes4 selector, int24 value1, int24 value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), signextend(2, value1))
            mstore(add(fmp, 0x24), signextend(2, value2))
            revert(fmp, 0x44)
        }
    }

    /// @dev Reverts with a custom error with two uint160 arguments
    function revertWith(bytes4 selector, uint160 value1, uint160 value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), and(value1, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(add(fmp, 0x24), and(value2, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(fmp, 0x44)
        }
    }

    /// @dev Reverts with a custom error with two address arguments
    function revertWith(bytes4 selector, address value1, address value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), and(value1, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(add(fmp, 0x24), and(value2, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(fmp, 0x44)
        }
    }

    /// @notice bubble up the revert message returned by a call and revert with a wrapped ERC-7751 error
    /// @dev this method can be vulnerable to revert data bombs
    function bubbleUpAndRevertWith(
        address revertingContract,
        bytes4 revertingFunctionSelector,
        bytes4 additionalContext
    ) internal pure {
        bytes4 wrappedErrorSelector = WrappedError.selector;
        assembly ("memory-safe") {
            // Ensure the size of the revert data is a multiple of 32 bytes
            let encodedDataSize := mul(div(add(returndatasize(), 31), 32), 32)

            let fmp := mload(0x40)

            // Encode wrapped error selector, address, function selector, offset, additional context, size, revert reason
            mstore(fmp, wrappedErrorSelector)
            mstore(add(fmp, 0x04), and(revertingContract, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(
                add(fmp, 0x24),
                and(revertingFunctionSelector, 0xffffffff00000000000000000000000000000000000000000000000000000000)
            )
            // offset revert reason
            mstore(add(fmp, 0x44), 0x80)
            // offset additional context
            mstore(add(fmp, 0x64), add(0xa0, encodedDataSize))
            // size revert reason
            mstore(add(fmp, 0x84), returndatasize())
            // revert reason
            returndatacopy(add(fmp, 0xa4), 0, returndatasize())
            // size additional context
            mstore(add(fmp, add(0xa4, encodedDataSize)), 0x04)
            // additional context
            mstore(
                add(fmp, add(0xc4, encodedDataSize)),
                and(additionalContext, 0xffffffff00000000000000000000000000000000000000000000000000000000)
            )
            revert(fmp, add(0xe4, encodedDataSize))
        }
    }
}
"
    },
    "npm/@uniswap/v4-core@1.0.2/src/libraries/SafeCast.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {CustomRevert} from "./CustomRevert.sol";

/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
library SafeCast {
    using CustomRevert for bytes4;

    error SafeCastOverflow();

    /// @notice Cast a uint256 to a uint160, revert on overflow
    /// @param x The uint256 to be downcasted
    /// @return y The downcasted integer, now type uint160
    function toUint160(uint256 x) internal pure returns (uint160 y) {
        y = uint160(x);
        if (y != x) SafeCastOverflow.selector.revertWith();
    }

    /// @notice Cast a uint256 to a uint128, revert on overflow
    /// @param x The uint256 to be downcas