LoyaltyProgram

{{
  "language": "Solidity",
  "sources": {
    "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
"
    },
    "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reinitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.
     *
     * NOTE: Consider following the ERC-7201 formula to derive storage locations.
     */
    function _initializableStorageSlot() internal pure virtual returns (bytes32) {
        return INITIALIZABLE_STORAGE;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        bytes32 slot = _initializableStorageSlot();
        assembly {
            $.slot := slot
        }
    }
}
"
    },
    "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}
"
    },
    "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Pausable
    struct PausableStorage {
        bool _paused;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Pausable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant PausableStorageLocation = 0xcd5ed15c6e187e77e9aee88184c21f4f2182ab5827cb3b7e07fbedcd63f03300;

    function _getPausableStorage() private pure returns (PausableStorage storage $) {
        assembly {
            $.slot := PausableStorageLocation
        }
    }

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    function __Pausable_init() internal onlyInitializing {
    }

    function __Pausable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        PausableStorage storage $ = _getPausableStorage();
        return $._paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = false;
        emit Unpaused(_msgSender());
    }
}
"
    },
    "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
 * consider using {ReentrancyGuardTransient} instead.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    /// @custom:storage-location erc7201:openzeppelin.storage.ReentrancyGuard
    struct ReentrancyGuardStorage {
        uint256 _status;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ReentrancyGuard")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ReentrancyGuardStorageLocation = 0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;

    function _getReentrancyGuardStorage() private pure returns (ReentrancyGuardStorage storage $) {
        assembly {
            $.slot := ReentrancyGuardStorageLocation
        }
    }

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if ($._status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        $._status = ENTERED;
    }

    function _nonReentrantAfter() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        return $._status == ENTERED;
    }
}
"
    },
    "@openzeppelin/contracts/interfaces/IERC1363.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)

pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}
"
    },
    "@openzeppelin/contracts/interfaces/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)

pragma solidity >=0.4.16;

import {IERC165} from "../utils/introspection/IERC165.sol";
"
    },
    "@openzeppelin/contracts/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)

pragma solidity >=0.4.16;

import {IERC20} from "../token/ERC20/IERC20.sol";
"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}
"
    },
    "@openzeppelin/contracts/utils/introspection/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
"
    },
    "contracts/DateTimeLib.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.30;

// @notice A minimal date library based on BokkyPooBah's DateTime (MIT).
library DateTimeLib {

    uint256 internal constant SECONDS_PER_DAY = 24 * 60 * 60;
    int256 internal constant OFFSET19700101 = 2440588;

    /// @dev Converts date to days since epoch
    function daysFromDate(uint256 year, uint256 month, uint256 day) internal pure returns (uint256 _days) {
        require(year >= 1970 && month >= 1 && month <= 12 && day >= 1 && day <= 31, "BadDate");
        int256 _year = int256(year);
        int256 _month = int256(month);
        int256 _day = int256(day);
        int256 __days = _day - 32075
            + 1461 * (_year + 4800 + (_month - 14) / 12) / 4
            + 367 * (_month - 2 - (_month - 14) / 12 * 12) / 12
            - 3 * ((_year + 4900 + (_month - 14) / 12) / 100) / 4
            - OFFSET19700101;
        _days = uint256(__days);
    }

    /// @dev Converts days since epoch to date
    function daysToDate(uint256 _days) internal pure returns (uint256 year, uint256 month, uint256 day) {
        int256 __days = int256(_days);
        int256 L = __days + 68569 + OFFSET19700101;
        int256 N = 4 * L / 146097;
        L = L - (146097 * N + 3) / 4;
        int256 _year = 4000 * (L + 1) / 1461001;
        L = L - 1461 * _year / 4 + 31;
        int256 _month = 80 * L / 2447;
        int256 _day = L - 2447 * _month / 80;
        L = _month / 11;
        _month = _month + 2 - 12 * L;
        _year = 100 * (N - 49) + _year + L;
        year = uint256(_year);
        month = uint256(_month);
        day = uint256(_day);
    }

    /// @dev Converts date to Unix timestamp
    function timestampFromDate(uint256 year, uint256 month, uint256 day) internal pure returns (uint256) {
        return daysFromDate(year, month, day) * SECONDS_PER_DAY;
    }

    /// @dev Converts Unix timestamp to date
    function timestampToDate(uint256 timestamp) internal pure returns (uint256 year, uint256 month, uint256 day) {
        (year, month, day) = daysToDate(timestamp / SECONDS_PER_DAY);
    }

    /// @notice Возвращает идентификатор календарного месяца как year*12 + month (month in 1..12)
    function monthId(uint256 timestamp) internal pure returns (uint32) {
        (uint256 y, uint256 m,) = timestampToDate(timestamp);
        return uint32(y * 12 + m);
    }

    /// @notice Старт месяца (UTC 00:00) по идентификатору monthId = y*12+m
    function monthStartTs(uint32 monthId_) internal pure returns (uint256) {
        uint256 y = uint256(monthId_ / 12);
        uint256 m = uint256(monthId_ % 12);
        if (m == 0) {y -= 1;
            m = 12;}
        return timestampFromDate(y, m, 1);
    }

    /// @dev Returns timestamp of month start from given timestamp
    function monthStartTsFromTimestamp(uint256 timestamp) internal pure returns (uint256) {
        return monthStartTs(monthId(timestamp));
    }
}
"
    },
    "contracts/interfaces/IBronToken.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity ^0.8.30;

interface IBronToken {

    function loyaltyLock(address account, uint256 value) external;

    function loyaltyUnlock(address account, uint256 value) external;

    function availableBalanceOf(address account) external view returns (uint256);

    function loyaltyLockedBalanceOf(address account) external view returns (uint256);

}
"
    },
    "contracts/interfaces/ILoyaltyProgram.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity ^0.8.30;

interface ILoyaltyProgram {

    function depositRewards(uint128 _amount) external;

}
"
    },
    "contracts/LoyaltyProgram.sol": {
      "content": "// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.30;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol";

import "./interfaces/IBronToken.sol";

import "./LoyaltyProgramStorage.sol";
import "./DateTimeLib.sol";

contract LoyaltyProgram is LoyaltyProgramStorage, OwnableUpgradeable, ReentrancyGuardUpgradeable, PausableUpgradeable {

    using SafeERC20 for IERC20;
    using DateTimeLib for uint32;
    using DateTimeLib for uint256;

    // ------------------------------------------------------------
    // Constants
    // ------------------------------------------------------------

    uint32 private constant DAYS_15_IN_SECONDS = 86400 * 15;

    // ------------------------------------------------------------
    // Errors
    // ------------------------------------------------------------

    error INVALID_INPUT();

    // ------------------------------------------------------------
    // Events
    // ------------------------------------------------------------

    event TokensLocked(address indexed user, uint128 indexed amount);
    event TokensUnlocked(address indexed user, uint128 indexed amount);
    event RewardsCollected(address indexed user, uint128 indexed amount);
    event RewardsDeposited(uint128 indexed amount);

    // ------------------------------------------------------------
    // Constructor
    // ------------------------------------------------------------

    function initialize(address _bronToken, uint128 _entryThreshold, address _owner) public initializer {
        __Ownable_init(_owner);
        __ReentrancyGuard_init();

        bronToken = _bronToken;
        entryThreshold = _entryThreshold;

        lastSyncedAt = uint32(block.timestamp);
        actualMonth = (block.timestamp).monthId();

        if (_isFirst15Days()) {
            lastFinalizedMonth = actualMonth - 2;
        } else {
            lastFinalizedMonth = actualMonth - 1;
        }
    }

    function initializeV2() public reinitializer(2) {
        __Pausable_init();
    }

    // ------------------------------------------------------------
    // Public functions
    // ------------------------------------------------------------

    function lock(uint128 _amount) external nonReentrant {
        uint128 lockedForEntryThreshold = users[msg.sender].lockedForEntryThreshold;

        require((lockedForEntryThreshold + _amount >= entryThreshold) && _amount > 0, INVALID_INPUT());

        if (getTotalUserLock(msg.sender) == 0) {
            users[msg.sender].checkpoint = lastFinalizedMonth;
        }

        _collectRewards(msg.sender);

        IBronToken(bronToken).loyaltyLock(msg.sender, _amount);

        if (lockedForEntryThreshold < entryThreshold) {
            users[msg.sender].lockedForEntryThreshold = entryThreshold;

            uint128 amountAboveThreshold = _amount + lockedForEntryThreshold - entryThreshold;

            users[msg.sender].tokensDeltaForNextMonth[actualMonth] += amountAboveThreshold;
            months[actualMonth].tokensDeltaForNextMonth += amountAboveThreshold;
        } else {
            users[msg.sender].tokensDeltaForNextMonth[actualMonth] += _amount;
            months[actualMonth].tokensDeltaForNextMonth += _amount;
        }

        emit TokensLocked(msg.sender, _amount);
    }

    function unlock(uint128 _amount) external nonReentrant {
        _unlock(_amount, msg.sender);
    }

    function collectRewards() external nonReentrant {
        if (users[msg.sender].lockedForEntryThreshold != entryThreshold) {
            syncUserEntryThreshold(msg.sender);
        } else {
            _collectRewards(msg.sender);
        }
    }

    function depositRewards(uint128 _amount) external override nonReentrant {
        _syncMonthData();

        require(_amount > 0, INVALID_INPUT());

        IERC20(bronToken).safeTransferFrom(msg.sender, address(this), _amount);

        uint128 feeAmount = (_amount * feeBps) / 10000;
        totalFeesCollected += feeAmount;

        totalAccruedRewards += (_amount - feeAmount);
        months[actualMonth].accruedRewards += (_amount - feeAmount);
    }

    /**
     * in case when entryThreshold decreases and user need to lock the difference between the old and new entryThreshold
     */
    function syncUserEntryThreshold(address _user) public nonReentrant {
        _collectRewards(_user);

        uint128 lockedForEntryThreshold = users[_user].lockedForEntryThreshold;

        if (lockedForEntryThreshold > entryThreshold) {
            uint128 amountAboveThreshold = lockedForEntryThreshold - entryThreshold;

            users[_user].lockedForEntryThreshold -= amountAboveThreshold;
            users[_user].tokensDeltaForNextMonth[actualMonth] += amountAboveThreshold;
            months[actualMonth].tokensDeltaForNextMonth += amountAboveThreshold;
        }
    }

    function syncMonthData() external {
        _syncMonthData();
    }

    // ------------------------------------------------------------
    // View functions
    // ------------------------------------------------------------

    function getUserAmountToCollect(address _user) public view returns (uint128, uint128) {
        if (users[_user].checkpoint == 0) {return (0, 0);}
        uint128 amountToCollect;

        uint128 lockAmount = users[_user].tokensLockedOnCheckpoint + users[_user].tokensDeltaForNextMonth[users[_user].checkpoint];
        for (uint32 i = (users[_user].checkpoint + 1); i <= lastFinalizedMonth; i++) {

            if (months[i].totalTokenLocked != 0) {
                amountToCollect += uint128(uint256(months[i].accruedRewards) * uint256(lockAmount) / uint256(months[i].totalTokenLocked));
            }

            if (users[_user].tokensDeltaForNextMonth[i] != 0) {
                lockAmount += users[_user].tokensDeltaForNextMonth[i];
            }
        }

        return (amountToCollect, lockAmount);
    }

    function getUserBondingLock(address _user) public view returns (uint128) {
        return users[_user].tokensDeltaForNextMonth[actualMonth];
    }

    function getActualMonthTotalAccruedRewards() public view returns (uint128) {
        return (months[actualMonth].accruedRewards);
    }

    function getActualMonthUserAccruedRewards(address _user) public view returns (uint128) {
        return _calculateUserAccruedRewardsTill(_user, actualMonth);
    }

    function getLastMonthTotalAccruedRewards() public view returns (uint128) {
        return (months[actualMonth - 1].accruedRewards);
    }

    function getLastMonthUserAccruedRewards(address _user) public view returns (uint128) {
        return _calculateUserAccruedRewardsTill(_user, actualMonth - 1);
    }

    function getTotalUserLock(address _user) public view returns (uint128) {
        if (users[_user].checkpoint == 0) {return 0;}
        uint128 lockAmount = users[_user].tokensLockedOnCheckpoint + users[_user].tokensDeltaForNextMonth[users[_user].checkpoint];
        for (uint32 i = (users[_user].checkpoint + 1); i <= actualMonth; i++) {
            if (users[_user].tokensDeltaForNextMonth[i] != 0) {
                lockAmount += users[_user].tokensDeltaForNextMonth[i];
            }
        }
        return lockAmount + users[_user].lockedForEntryThreshold;
    }

    function getTokensDeltaForNextMonthForUser(address _user, uint32 _month) public view returns (uint128) {
        return users[_user].tokensDeltaForNextMonth[_month];
    }

    function getUserInfo(address _user) public view returns (
        uint128 userAmountToCollect,
        uint128 totalUserLock,
        uint128 userBondingLock,
        uint128 lockedForEntryThreshold,
        uint128 userActualMonthAccruedRewards,
        uint128 lastMonthUserAccruedRewards
    ) {
        (userAmountToCollect,) = getUserAmountToCollect(_user);
        totalUserLock = getTotalUserLock(_user);
        userBondingLock = getUserBondingLock(_user);
        lockedForEntryThreshold = users[_user].lockedForEntryThreshold;
        userActualMonthAccruedRewards = getActualMonthUserAccruedRewards(_user);
        lastMonthUserAccruedRewards = getLastMonthUserAccruedRewards(_user);
    }

    // ------------------------------------------------------------
    // Admin functions
    // ------------------------------------------------------------

    function setEntryThreshold(uint128 _entryThreshold) external onlyOwner {
        require(_entryThreshold < entryThreshold, INVALID_INPUT());
        entryThreshold = _entryThreshold;
    }

    function claimFees(address _receiver) external onlyOwner nonReentrant {
        IERC20(bronToken).safeTransfer(_receiver, totalFeesCollected);
        totalFeesCollected = 0;
    }

    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }

    // ------------------------------------------------------------
    // Private functions
    // ------------------------------------------------------------

    function _collectRewards(address _user) internal whenNotPaused {
        _syncMonthData();

        (uint128 amountToCollect, uint128 lockedAmount) = getUserAmountToCollect(_user);

        IERC20(bronToken).safeTransfer(_user, amountToCollect);

        users[_user].tokensLockedOnCheckpoint = (lockedAmount - users[_user].tokensDeltaForNextMonth[lastFinalizedMonth]);
        users[_user].checkpoint = lastFinalizedMonth;

        emit RewardsCollected(_user, amountToCollect);
    }

    function _unlock(uint128 _amount, address _user) private {
        require(_amount > 0, INVALID_INPUT());

        _collectRewards(_user);

        if (_amount > getTotalUserLock(_user) - users[_user].lockedForEntryThreshold) {
            _amount = getTotalUserLock(_user) - users[_user].lockedForEntryThreshold;
        }

        uint128 toBeUnlockedTokens = _amount;

        // check current month delta amount and withdraws available amount from delta for next month
        toBeUnlockedTokens = _makeWithdrawalOfDeltaByMonth(_user, toBeUnlockedTokens, actualMonth);

        // if needs - check previous month delta amount (in case of lastFinalizedMonth is "-2") and withdraws available amount from delta for next month
        if (_isFirst15Days()) {
            toBeUnlockedTokens = _makeWithdrawalOfDeltaByMonth(_user, toBeUnlockedTokens, actualMonth - 1);
        }

//         check lastFinalizedMonth month delta amount and withdraws available amount from delta for next month
        toBeUnlockedTokens = _makeWithdrawalOfDeltaByMonth(_user, toBeUnlockedTokens, lastFinalizedMonth);

        if (months[lastFinalizedMonth].totalTokenLocked != 0) {
            months[lastFinalizedMonth].accruedRewards -= uint128(uint256(months[lastFinalizedMonth].accruedRewards) * uint256(toBeUnlockedTokens) / uint256(months[lastFinalizedMonth].totalTokenLocked));
        }

        if (users[_user].tokensLockedOnCheckpoint != 0) {
            users[_user].tokensLockedOnCheckpoint -= toBeUnlockedTokens;
            months[lastFinalizedMonth].totalTokenLocked -= toBeUnlockedTokens;
        }

        if (
            users[_user].tokensLockedOnCheckpoint == 0 &&
            users[_user].tokensDeltaForNextMonth[actualMonth] == 0 &&
            (!_isFirst15Days() || users[_user].tokensDeltaForNextMonth[actualMonth - 1] == 0) &&
            users[_user].tokensDeltaForNextMonth[lastFinalizedMonth] == 0
        ) {
            IBronToken(bronToken).loyaltyUnlock(_user, _amount + users[_user].lockedForEntryThreshold);
            emit TokensUnlocked(_user, _amount + users[_user].lockedForEntryThreshold);
            users[_user].lockedForEntryThreshold = 0;
        } else {
            IBronToken(bronToken).loyaltyUnlock(_user, _amount);
            emit TokensUnlocked(_user, _amount);
        }

    }

    function _makeWithdrawalOfDeltaByMonth(address _user, uint128 _amount, uint32 _month) private returns (uint128) {
        uint128 toBeUnlockedTokens = _amount;

        if (users[_user].tokensDeltaForNextMonth[_month] == 0) { // skip
            return toBeUnlockedTokens;
        } else if (toBeUnlockedTokens >= users[_user].tokensDeltaForNextMonth[_month]) { // withdraw all
            toBeUnlockedTokens -= users[_user].tokensDeltaForNextMonth[_month];
            months[_month].tokensDeltaForNextMonth -= users[_user].tokensDeltaForNextMonth[_month];
            users[_user].tokensDeltaForNextMonth[_month] = 0;
        } else { // withdraw part of it
            users[_user].tokensDeltaForNextMonth[_month] -= toBeUnlockedTokens;
            months[_month].tokensDeltaForNextMonth -= toBeUnlockedTokens;
            toBeUnlockedTokens = 0;
        }

        return toBeUnlockedTokens;
    }

    function _syncMonthData() private {
        // in case this was already called in the same block
        if (lastSyncedAt != uint32(block.timestamp)) {
            uint32 currentMonth = (block.timestamp).monthId();

            if (currentMonth != actualMonth) {
                actualMonth = currentMonth;
            }

            uint32 lastFinalizedMonthStash = lastFinalizedMonth;
            if (_isFirst15Days()) {
                lastFinalizedMonth = actualMonth - 2;
            } else {
                lastFinalizedMonth = actualMonth - 1;
            }

            if (lastFinalizedMonthStash != lastFinalizedMonth) {
                for (uint32 i = (lastFinalizedMonthStash + 1); i <= lastFinalizedMonth; i++) {
                    months[i].totalTokenLocked = months[i - 1].totalTokenLocked + months[i - 1].tokensDeltaForNextMonth;
                }
            }
        }
    }

    function _isFirst15Days() internal view returns (bool) {
        return block.timestamp < actualMonth.monthStartTs() + DAYS_15_IN_SECONDS;
    }

    function _calculateUserAccruedRewardsTill(address _user, uint32 _till) internal view returns (uint128) {
        if (users[_user].checkpoint == 0) {return 0;}

        uint128 userLockAmount = users[_user].tokensLockedOnCheckpoint + users[_user].tokensDeltaForNextMonth[users[_user].checkpoint];
        uint128 totalTokenLocked = months[lastFinalizedMonth].totalTokenLocked + months[lastFinalizedMonth].tokensDeltaForNextMonth;

        for (uint32 i = (users[_user].checkpoint + 1); i <= (_till - 1); i++) {
            if (users[_user].tokensDeltaForNextMonth[i] != 0) {
                userLockAmount += users[_user].tokensDeltaForNextMonth[i];
            }
        }

        for (uint32 i = (lastFinalizedMonth + 1); i <= (_till - 1); i++) {
            if (months[i].tokensDeltaForNextMonth != 0) {
                totalTokenLocked += months[i].tokensDeltaForNextMonth;
            }
        }

        if (totalTokenLocked == 0) {
            return 0;
        } else {
            return (uint128(uint256(months[_till].accruedRewards) * uint256(userLockAmount) / uint256(totalTokenLocked)));
        }
    }

}
"
    },
    "contracts/LoyaltyProgramStorage.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.30;

import "./interfaces/ILoyaltyProgram.sol";

abstract contract LoyaltyProgramStorage is ILoyaltyProgram {

    uint32 public lastSyncedAt;
    uint32 public actualMonth;
    uint32 public lastFinalizedMonth;

    uint128 public entryThreshold;
    uint128 public totalAccruedRewards;

    address public bronToken;

    uint16 public feeBps;
    uint128 public totalFeesCollected;

    struct Month {
        uint128 accruedRewards;
        uint128 totalTokenLocked;
        uint128 tokensDeltaForNextMonth;
    }

    mapping(uint32 => Month) public months;

    struct User {
        mapping(uint128 => uint128) tokensDeltaForNextMonth;
        uint32 checkpoint; // monthId
        uint128 tokensLockedOnCheckpoint;
        uint128 lockedForEntryThreshold;
    }

    mapping(address => User) public users;

    uint256[50] private __gap;
}
"
    }
  },
  "settings": {
    "evmVersion": "paris",
    "optimizer": {
      "enabled": false,
      "runs": 200
    },
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    },
    "metadata": {
      "useLiteralContent": true
    }
  }
}}