Aoat

{{
  "language": "Solidity",
  "sources": {
    "contracts/Aoat.sol": {
      "content": "// SPDX-License-Identifier: MIT\r
pragma solidity ^0.8.17;\r
\r
/**\r
 * @title FlashloanLiquidatorComplete\r
 * @notice Complete Aave V3 liquidation contract with flashloan and Uniswap swap\r
 * @dev Combines: Flashloan → Liquidation → Uniswap Swap → Repay → Profit!\r
 * \r
 * WORKFLOW:\r
 * 1. Take flashloan of debt token (e.g., borrow 10 LINK with 0 upfront capital)\r
 * 2. Liquidate user (repay 10 LINK debt, receive ~11 AAVE worth $330 with 10% bonus)\r
 * 3. Swap collateral on Uniswap (swap 11 AAVE → get ~10.2 LINK back)\r
 * 4. Repay flashloan (10 LINK + 0.009 LINK premium = 10.009 LINK)\r
 * 5. Keep profit (10.2 - 10.009 = 0.191 LINK profit = ~$5.73!)\r
 * \r
 * SEPOLIA ADDRESSES:\r
 * - Aave Pool Addresses Provider: 0x012bAC54348C0E635dCAc9D5FB99f06F24136C9A\r
 * - Uniswap SwapRouter02: 0x3bFA4769FB09eefC5a80d6E87c3B9C650f7Ae48E\r
 */\r
\r
import {FlashLoanSimpleReceiverBase} from "@aave/core-v3/contracts/flashloan/base/FlashLoanSimpleReceiverBase.sol";\r
import {IPoolAddressesProvider} from "@aave/core-v3/contracts/interfaces/IPoolAddressesProvider.sol";\r
import {IPool} from "@aave/core-v3/contracts/interfaces/IPool.sol";\r
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";\r
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";\r
import {IV3SwapRouter} from "@uniswap/swap-router-contracts/contracts/interfaces/IV3SwapRouter.sol";\r
\r
contract Aoat is FlashLoanSimpleReceiverBase {\r
    using SafeERC20 for IERC20;\r
    \r
    // ========== STATE VARIABLES ==========\r
    \r
    address public owner;\r
    IV3SwapRouter public immutable swapRouter;\r
    \r
    // Uniswap V3 fee tiers\r
    uint24 public constant FEE_LOW = 500;      // 0.05%\r
    uint24 public constant FEE_MEDIUM = 3000;  // 0.3%\r
    uint24 public constant FEE_HIGH = 10000;   // 1%\r
    \r
    // Liquidation parameters struct\r
    struct LiquidationParams {\r
        address user;\r
        address debtAsset;\r
        address collateralAsset;\r
        uint256 debtToCover;\r
        bool receiveAToken;\r
        bool useDirectSwap;\r
        uint24 directSwapFee;\r
        bytes swapPath;\r
    }\r
    \r
    // ========== EVENTS ==========\r
    \r
    event LiquidationExecuted(\r
        address indexed user,\r
        address indexed debtAsset,\r
        address indexed collateralAsset,\r
        uint256 debtRepaid,\r
        uint256 collateralReceived,\r
        uint256 debtTokenAfterSwap,\r
        uint256 profit\r
    );\r
    \r
    // ========== CONSTRUCTOR ==========\r
    \r
    /**\r
     * @param _addressProvider Aave: 0x012bAC54348C0E635dCAc9D5FB99f06F24136C9A\r
     * @param _swapRouter Uniswap: 0x3bFA4769FB09eefC5a80d6E87c3B9C650f7Ae48E\r
     */\r
    constructor(\r
        address _addressProvider,\r
        address _swapRouter\r
    ) FlashLoanSimpleReceiverBase(IPoolAddressesProvider(_addressProvider)) {\r
        require(_swapRouter != address(0), "Invalid router");\r
        owner = msg.sender;\r
        swapRouter = IV3SwapRouter(_swapRouter);\r
    }\r
    \r
    modifier onlyOwner() {\r
        require(msg.sender == owner, "Not owner");\r
        _;\r
    }\r
    \r
    // ========== MAIN ENTRY POINT ==========\r
    \r
    /**\r
     * @notice Execute flashloan liquidation with automatic swap\r
     * @param user User to liquidate\r
     * @param debtAsset Token user borrowed (we flashloan this)\r
     * @param collateralAsset Token user deposited (we receive this)\r
     * @param debtToCover Amount to liquidate\r
     * @param receiveAToken false = receive underlying token\r
     * @param useDirectSwap true = direct swap, false = multi-hop\r
     * @param directSwapFee Fee for direct swap (500/3000/10000)\r
     * @param swapPath Encoded path for multi-hop (0x for direct)\r
     * \r
     * EXAMPLE - Direct Swap (LINK debt, AAVE collateral):\r
     * user: 0x5c76e4d7760431cbf65deac9d45a0ea032eafe10\r
     * debtAsset: 0xf8Fb3713D459D7C1018BD0A49D19b4C44290EBE5 (LINK)\r
     * collateralAsset: 0x88541670E55cC00bEEFD87eB59EDd1b7C511AC9a (AAVE)\r
     * debtToCover: 10000000000000000000 (10 LINK)\r
     * receiveAToken: false\r
     * useDirectSwap: true\r
     * directSwapFee: 3000\r
     * swapPath: 0x\r
     */\r
    function executeLiquidation(\r
        address user,\r
        address debtAsset,\r
        address collateralAsset,\r
        uint256 debtToCover,\r
        bool receiveAToken,\r
        bool useDirectSwap,\r
        uint24 directSwapFee,\r
        bytes calldata swapPath\r
    ) external onlyOwner {\r
        require(user != address(0), "Invalid user");\r
        require(debtAsset != address(0), "Invalid debt asset");\r
        require(collateralAsset != address(0), "Invalid collateral");\r
        require(debtToCover > 0, "Amount must be > 0");\r
        \r
        // Check user is liquidatable\r
        (, , , , , uint256 healthFactor) = POOL.getUserAccountData(user);\r
        require(healthFactor < 1e18, "User not liquidatable");\r
        \r
        // Encode params to pass through flashloan\r
        bytes memory params = abi.encode(\r
            LiquidationParams({\r
                user: user,\r
                debtAsset: debtAsset,\r
                collateralAsset: collateralAsset,\r
                debtToCover: debtToCover,\r
                receiveAToken: receiveAToken,\r
                useDirectSwap: useDirectSwap,\r
                directSwapFee: directSwapFee,\r
                swapPath: swapPath\r
            })\r
        );\r
        \r
        // Request flashloan - this triggers executeOperation callback\r
        POOL.flashLoanSimple(\r
            address(this),\r
            debtAsset,\r
            debtToCover,\r
            params,\r
            0\r
        );\r
    }\r
    \r
    // ========== FLASHLOAN CALLBACK ==========\r
    \r
    /**\r
     * @notice Aave calls this after granting flashloan\r
     * @dev This is where all the work happens:\r
     *      1. Liquidate position\r
     *      2. Swap collateral to debt token\r
     *      3. Repay flashloan\r
     *      4. Keep profit\r
     */\r
    function executeOperation(\r
        address asset,\r
        uint256 amount,\r
        uint256 premium,\r
        address initiator,\r
        bytes calldata params\r
    ) external override returns (bool) {\r
        require(msg.sender == address(POOL), "Caller must be Pool");\r
        require(initiator == address(this), "Invalid initiator");\r
        \r
        // Decode parameters\r
        LiquidationParams memory lp = abi.decode(params, (LiquidationParams));\r
        require(asset == lp.debtAsset, "Asset mismatch");\r
        \r
        // STEP 1: Execute liquidation\r
        uint256 collateralReceived = _liquidate(lp, amount);\r
        \r
        // STEP 2: Swap collateral back to debt token\r
        uint256 debtTokenReceived = _swap(lp, collateralReceived);\r
        \r
        // STEP 3: Calculate repayment\r
        uint256 totalDebt = amount + premium;\r
        require(debtTokenReceived >= totalDebt, "Insufficient to repay flashloan");\r
        \r
        uint256 profit = debtTokenReceived - totalDebt;\r
        \r
        // STEP 4: Approve Aave to pull repayment\r
        IERC20(asset).approve(address(POOL), totalDebt);\r
        \r
        // Emit event\r
        emit LiquidationExecuted(\r
            lp.user,\r
            lp.debtAsset,\r
            lp.collateralAsset,\r
            amount,\r
            collateralReceived,\r
            debtTokenReceived,\r
            profit\r
        );\r
        \r
        return true;\r
    }\r
    \r
    // ========== INTERNAL FUNCTIONS ==========\r
    \r
    /**\r
     * @notice Execute Aave liquidation\r
     */\r
    function _liquidate(\r
        LiquidationParams memory lp,\r
        uint256 debtAmount\r
    ) internal returns (uint256 collateralReceived) {\r
        // Track collateral before\r
        uint256 balanceBefore = IERC20(lp.collateralAsset).balanceOf(address(this));\r
        \r
        // Approve Aave to spend debt token\r
        IERC20(lp.debtAsset).approve(address(POOL), debtAmount);\r
        \r
        // Execute liquidation\r
        POOL.liquidationCall(\r
            lp.collateralAsset,\r
            lp.debtAsset,\r
            lp.user,\r
            lp.debtToCover,\r
            lp.receiveAToken\r
        );\r
        \r
        // Calculate received collateral\r
        uint256 balanceAfter = IERC20(lp.collateralAsset).balanceOf(address(this));\r
        collateralReceived = balanceAfter - balanceBefore;\r
        \r
        require(collateralReceived > 0, "No collateral received");\r
        return collateralReceived;\r
    }\r
    \r
    /**\r
     * @notice Swap collateral to debt token on Uniswap\r
     */\r
    function _swap(\r
        LiquidationParams memory lp,\r
        uint256 amountIn\r
    ) internal returns (uint256 amountOut) {\r
        // Approve Uniswap to spend collateral\r
        IERC20(lp.collateralAsset).approve(address(swapRouter), amountIn);\r
        \r
        if (lp.useDirectSwap) {\r
            // Direct single-hop swap\r
            IV3SwapRouter.ExactInputSingleParams memory params = IV3SwapRouter\r
                .ExactInputSingleParams({\r
                    tokenIn: lp.collateralAsset,\r
                    tokenOut: lp.debtAsset,\r
                    fee: lp.directSwapFee,\r
                    recipient: address(this),\r
                    amountIn: amountIn,\r
                    amountOutMinimum: 0,  // No slippage protection (risky!)\r
                    sqrtPriceLimitX96: 0\r
                });\r
            \r
            amountOut = swapRouter.exactInputSingle(params);\r
        } else {\r
            // Multi-hop swap\r
            IV3SwapRouter.ExactInputParams memory params = IV3SwapRouter\r
                .ExactInputParams({\r
                    path: lp.swapPath,\r
                    recipient: address(this),\r
                    amountIn: amountIn,\r
                    amountOutMinimum: 0  // No slippage protection (risky!)\r
                });\r
            \r
            amountOut = swapRouter.exactInput(params);\r
        }\r
        \r
        require(amountOut > 0, "Swap returned 0");\r
        return amountOut;\r
    }\r
    \r
    // ========== HELPER FUNCTIONS ==========\r
    \r
    /**\r
     * @notice Withdraw tokens (for extracting profit)\r
     */\r
    function withdrawToken(address token, uint256 amount) external onlyOwner {\r
        if (amount == 0) {\r
            amount = IERC20(token).balanceOf(address(this));\r
        }\r
        require(amount > 0, "Nothing to withdraw");\r
        IERC20(token).safeTransfer(owner, amount);\r
    }\r
    \r
    /**\r
     * @notice Withdraw ETH\r
     */\r
    function withdrawETH(uint256 amount) external onlyOwner {\r
        if (amount == 0) {\r
            amount = address(this).balance;\r
        }\r
        require(amount > 0, "Nothing to withdraw");\r
        payable(owner).transfer(amount);\r
    }\r
    \r
    /**\r
     * @notice Get token balance\r
     */\r
    function getBalance(address token) external view returns (uint256) {\r
        return IERC20(token).balanceOf(address(this));\r
    }\r
    \r
    receive() external payable {}\r
}\r
\r
\r
/**\r
 * ============================================\r
 * QUICK START GUIDE\r
 * ============================================\r
 * \r
 * 1. DEPLOY (Sepolia Testnet):\r
 *    _addressProvider: 0x012bAC54348C0E635dCAc9D5FB99f06F24136C9A\r
 *    _swapRouter: 0x3bFA4769FB09eefC5a80d6E87c3B9C650f7Ae48E\r
 * \r
 * 2. FIND TARGET (use your scanner):\r
 *    node monitorBorrowersHF.js\r
 *    Look for HF < 1.0 with volatile collateral (AAVE/WBTC/LINK)\r
 * \r
 * 3. EXECUTE (example with LINK/AAVE):\r
 *    user: 0x5c76e4d7760431cbf65deac9d45a0ea032eafe10\r
 *    debtAsset: 0xf8Fb3713D459D7C1018BD0A49D19b4C44290EBE5\r
 *    collateralAsset: 0x88541670E55cC00bEEFD87eB59EDd1b7C511AC9a\r
 *    debtToCover: 10000000000000000000\r
 *    receiveAToken: false\r
 *    useDirectSwap: true\r
 *    directSwapFee: 3000\r
 *    swapPath: 0x\r
 * \r
 * 4. WITHDRAW PROFIT:\r
 *    withdrawToken(LINK_ADDRESS, 0)\r
 * \r
 * ============================================\r
 * PROFIT EXAMPLE\r
 * ============================================\r
 * \r
 * Flashloan: 10 LINK (cost: 0.009 LINK premium)\r
 * Liquidation: Get 1.1 AAVE (~$330 with 10% bonus)\r
 * Swap: 1.1 AAVE → 10.2 LINK (after 0.3% Uniswap fee)\r
 * Repay: 10.009 LINK\r
 * Profit: 0.191 LINK (~$5.73 at $30/LINK)\r
 * \r
 * ============================================\r
 * MULTI-HOP SWAP (if needed)\r
 * ============================================\r
 * \r
 * If no direct AAVE/LINK pool, route through WETH:\r
 * Path: AAVE → WETH → LINK\r
 * \r
 * Build path (63 bytes):\r
 * 0x88541670E55cC00bEEFD87eB59EDd1b7C511AC9a  (AAVE)\r
 * 000bb8                                      (fee 3000)\r
 * fFf9976782d46CC05630D1f6eBAb18b2324d6B14  (WETH)\r
 * 000bb8                                      (fee 3000)\r
 * f8Fb3713D459D7C1018BD0A49D19b4C44290EBE5  (LINK)\r
 * \r
 * Combined:\r
 * 0x88541670E55cC00bEEFD87eB59EDd1b7C511AC9a000bb8fFf9976782d46CC05630D1f6eBAb18b2324d6B14000bb8f8Fb3713D459D7C1018BD0A49D19b4C44290EBE5\r
 * \r
 * Then set:\r
 * useDirectSwap: false\r
 * swapPath: [path above]\r
 * \r
 * ============================================\r
 */\r
"
    },
    "@uniswap/swap-router-contracts/contracts/interfaces/IV3SwapRouter.sol": {
      "content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;

import '@uniswap/v3-core/contracts/interfaces/callback/IUniswapV3SwapCallback.sol';

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface IV3SwapRouter is IUniswapV3SwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @dev Setting `amountIn` to 0 will cause the contract to look up its own balance,
    /// and swap the entire amount, enabling contracts to send tokens before calling this function.
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @dev Setting `amountIn` to 0 will cause the contract to look up its own balance,
    /// and swap the entire amount, enabling contracts to send tokens before calling this function.
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// that may remain in the router after the swap.
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// that may remain in the router after the swap.
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);
}
"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}
"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
    },
    "@aave/core-v3/contracts/interfaces/IPool.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;

  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;

  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
}
"
    },
    "@aave/core-v3/contracts/interfaces/IPoolAddressesProvider.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress Th