SwapWFlashloan

{{
  "language": "Solidity",
  "sources": {
    "src/aaveSwap.sol": {
      "content": "// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.28;

interface IUniswapV2Router {
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
}

import { UniversalRouter } from "@uniswap/universal-router/contracts/UniversalRouter.sol";
import { Commands } from "@uniswap/universal-router/contracts/libraries/Commands.sol";
import { IPoolManager } from "@uniswap/v4-core/src/interfaces/IPoolManager.sol";
import { IV4Router } from "@uniswap/v4-periphery/src/interfaces/IV4Router.sol";
import { Actions } from "@uniswap/v4-periphery/src/libraries/Actions.sol";
import { IPermit2 } from "@uniswap/permit2/src/interfaces/IPermit2.sol";
import { StateLibrary } from "@uniswap/v4-core/src/libraries/StateLibrary.sol";
import { Currency } from "@uniswap/v4-core/src/types/Currency.sol";
import { PoolKey } from "@uniswap/v4-core/src/types/PoolKey.sol";

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IPool } from "@aave/core-v3/contracts/interfaces/IPool.sol";

interface IVariableDebtToken {
    function approveDelegation(address delegatee, uint256 amount) external;
}

struct FlashloanParams {
    address user;
    uint256 flashAmount;
    address borrowToken;
    address collateralAsset;
    address collateralAToken;
    address borrowedVariableDebt;
    address targetAsset;
    address targetAT;
    address uniswapRouter;
    uint256 minAmountOut;
    uint256 rateMode;
    uint256 supplyAmount;
    uint160 tradeAmount;
    uint256 borrowAmount;
    PoolKey key;
    uint128 amountIn;
    uint128 minAmountOut2;
    bool isReverse; // true for reverse direction swap
    bool isFirstTime; // true for first operation, false for subsequent operations
}

struct OperationParams {
    address user;
    address collateralAsset;
    address collateralAT;
    address borrowedVD;
    address targetAsset;
    address targetAT;
    address borrowT;
    bytes swapCallData;
    uint256 rateMode;
    uint256 amount; // flashAmount
    uint256 amountToSupply;
    uint160 amountToTrade;
    uint256 amountToBorrow;
    PoolKey daKey;
    uint128 aIn;
    uint128 minOut;
    bool isReverse; // true for reverse direction swap
    bool isFirstTime; // true for first operation, false for subsequent operations
}

contract SwapWFlashloan {
    address public cowswapSettlement;
    IPool public pool;
    address public usdcAsset;
    address public owner;
    address public _poolAddress;
    address public link;
    address public eurc;
    using StateLibrary for IPoolManager;

UniversalRouter public immutable router;
IPoolManager public immutable poolManager;
IPermit2 public immutable permit2;

    modifier onlyOwner() {
        require(msg.sender == owner, "Only owner");
        _;
    }
IERC20 private usdc;
    constructor(address _router, address _poolManager, address _permit2, address _pool, address _usdcAsset, address linkAddy, address eurcA) {
        router = UniversalRouter(payable(_router));
        poolManager = IPoolManager(_poolManager);
        permit2 = IPermit2(_permit2);
        pool = IPool(_pool);
        _poolAddress = _pool;
        usdcAsset = _usdcAsset;
        usdc = IERC20(_usdcAsset);
        owner = msg.sender;
        link = linkAddy;
        eurc = eurcA;
    }

    /**
     * @notice Allows the user to withdraw any ERC20 collateral asset from the contract
     * @param asset The address of the ERC20 token to withdraw
     * @param to The address to send the withdrawn tokens to
     * @param amount The amount of tokens to withdraw
     */

function withdraw(address asset, address to, uint256 amount) external onlyOwner {
        require(to != address(0), "Invalid recipient");
        IERC20(asset).transfer(to, amount);
    }
function approveUSDC(address aave) external onlyOwner{
    IERC20(aave).approve(_poolAddress, type(uint256).max);
}
function withdrawCollateral(address asset, uint256 amount) external onlyOwner {
    pool.withdraw(asset, amount, address(this));
}

function repay(address asset, uint256 amount, uint256 rateMode) external onlyOwner {
   // IERC20(asset).transferFrom(msg.sender, address(this), amount);
   IERC20(asset).approve(_poolAddress, amount);
    pool.repay(asset, amount, rateMode, address(this));
}

function supplyLiquidity(address aave, uint256 _amount, address onBehalfOf) external onlyOwner{
    uint16 referralCode = 0;
//IERC20(aave).transferFrom(msg.sender,address(this), _amount);
    pool.supply(aave, _amount, address(this), referralCode);
    //pool.setUserUseReserveAsCollateral(old, false);
    pool.setUserUseReserveAsCollateral(aave, true);
}
function supplyLiquidity2(address aave, address old, uint256 _amount) external onlyOwner {
    uint16 referralCode = 0;
    pool.supply(aave, _amount, address(this), referralCode);
    pool.setUserUseReserveAsCollateral(old, false);
    pool.setUserUseReserveAsCollateral(aave, true);
}
function borrow(address borrowT, uint256 amountToBorrow, uint256 rateMode, address onBehalfOf, address aEurs, uint256 largeAmount )external onlyOwner{
   //IERC20(aEurs).transferFrom(msg.sender, address(this),largeAmount);
   // pool.setUserUseReserveAsCollateral(eurc, true);
    uint16 referralCode = 0;
    pool.borrow(borrowT, amountToBorrow, rateMode, referralCode, onBehalfOf);
}
    /**
     * @notice Initiates a flashloan to repay debt, swap collateral, and resupply
     * @param params FlashloanParams struct containing all flashloan parameters
     */
    function initiateFlashloan(FlashloanParams calldata params) external onlyOwner{
        OperationParams memory op = OperationParams({
            user: params.user,
            collateralAsset: params.collateralAsset,
            collateralAT: params.collateralAToken,
            borrowedVD: params.borrowedVariableDebt,
            targetAsset: params.targetAsset,
            targetAT: params.targetAT,
            borrowT: params.borrowToken,
            swapCallData: abi.encode(params.uniswapRouter, params.minAmountOut),
            rateMode: params.rateMode,
            amount: params.flashAmount,
            amountToSupply: params.supplyAmount,
            amountToTrade: params.tradeAmount,
            amountToBorrow: params.borrowAmount,
            daKey: params.key,
            aIn: params.amountIn,
            minOut: params.minAmountOut2,
            isReverse: false,
            isFirstTime: params.isFirstTime
        });
        bytes memory paramsData = abi.encode(op);
        pool.flashLoanSimple(
            address(this),
            params.borrowToken,
            params.flashAmount,
            paramsData,
            0 // referralCode
        );
    }

    /**
     * @notice Initiates a reverse direction flashloan to repay debt, swap collateral, and resupply
     * @param params FlashloanParams struct containing all flashloan parameters
     */
    function initiateFlashloanReverse(FlashloanParams calldata params) external onlyOwner{
        OperationParams memory op = OperationParams({
            user: params.user,
            collateralAsset: params.collateralAsset,
            collateralAT: params.collateralAToken,
            borrowedVD: params.borrowedVariableDebt,
            targetAsset: params.targetAsset,
            targetAT: params.targetAT,
            borrowT: params.borrowToken,
            swapCallData: abi.encode(params.uniswapRouter, params.minAmountOut),
            rateMode: params.rateMode,
            amount: params.flashAmount,
            amountToSupply: params.supplyAmount,
            amountToTrade: params.tradeAmount,
            amountToBorrow: params.borrowAmount,
            daKey: params.key,
            aIn: params.amountIn,
            minOut: params.minAmountOut2,
            isReverse: true,
            isFirstTime: params.isFirstTime
        });
        bytes memory paramsData = abi.encode(op);
        pool.flashLoanSimple(
            address(this),
            params.borrowToken,
            params.flashAmount,
            paramsData,
            0 // referralCode
        );
    }

    /**
     * @notice AAVE flashloan callback. Handles repay, swap, supply, borrow, repay flashloan.
     * @param asset The address of the asset being flash-borrowed
     * @param amount The amount of the asset being flash-borrowed
     * @param premium The fee to be paid for the flashloan
     * @param initiator The address that initiated the flashloan
     * @param params Encoded params: (address user, address collateralAsset, address targetAsset, address sellToken, address buyToken, uint256 sellAmount, uint256 buyAmount, uint256 feeAmount, bytes orderUid, uint256 rateMode)
     */
    /**
     * @notice AAVE flashloan callback. Handles repay, swap, supply, borrow, repay flashloan.
     * @param asset The address of the asset being flash-borrowed
     * @param amount The amount of the asset being flash-borrowed
     * @param premium The fee to be paid for the flashloan
     * @param initiator The address that initiated the flashloan
     * @param params Encoded (address user, address collateralAsset, address targetAsset, bytes tradeParams, uint256 rateMode)
     */
    function executeOperation(
        address asset,
        uint256 amount,
        uint256 premium,
        address initiator,
        bytes calldata params
    ) external returns (bool) {
        OperationParams memory op = abi.decode(params, (OperationParams));

        // 1. Repay user's debt on Aave
       // IERC20(op.collateralAT).approve(_poolAddress, type(uint256).max);
//         IERC20(op.collateralAsset).approve(_poolAddress, type(uint256).max);
          IERC20(op.borrowT).approve(_poolAddress, type(uint256).max);
    // //     //IERC20(asset).approve(address(pool), amount);
         uint256 amountBorrowed = IERC20(op.borrowedVD).balanceOf(op.user);
      IPool(0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2).repay(op.borrowT,amountBorrowed , op.rateMode, op.user);
   

    // Transfer collateral aTokens - only on first time operation
    if (op.isFirstTime) {
        // For first operation: transfer from user to contract
        IERC20(op.collateralAT).transferFrom(op.user, address(this), IERC20(op.collateralAT).balanceOf(op.user));
    } else {
        // For subsequent operations: contract already owns the collateral, no transfer needed
        // Just ensure we have the collateral before withdrawal
    }
    
//     // Disable original collateral asset BEFORE withdrawal if doing reverse swap
    if (op.isReverse) {
        IPool(0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2).setUserUseReserveAsCollateral(op.collateralAsset, false);
    }

//         // 2. Transfer aToken collateral from user to this contract
//       uint256 aTokenBalance = IERC20(op.borrowedVD).balanceOf(address(this));
//         //require(aTokenBalance > 0, "No aToken collateral to withdraw");
//         //IERC20(op.collateralAsset).transferFrom(op.user, address(this), aTokenBalance);
        
//         // 3. Withdraw underlying collateral from Aave
//         // The collateralAsset here is the aToken, so we need to withdraw the underlying asset
//         // The underlying asset address must be known or mapped off-chain
//         // For this example, assume op.targetAsset is the underlying asset to withdraw
          uint256 withdrawnAmount = IPool(0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2).withdraw(op.collateralAsset, IERC20(op.collateralAT).balanceOf(address(this)), address(this));

//         // 4. Swap withdrawn collateral to target asset on Uniswap (if needed)
//         // (address uniswapRouter, uint256 minAmountOut) = abi.decode(op.swapCallData, (address, uint256));
//         // IERC20(op.targetAsset).approve(uniswapRouter, withdrawnAmount);
//         // address[] memory path = new address[](2);
//         // path[0] = op.targetAsset;
//         // path[1] = usdcAsset;
//         // uint256 deadline = block.timestamp + 1200;
//         // uint[] memory amounts = IUniswapV2Router(uniswapRouter).swapExactTokensForTokens(
//         //     withdrawnAmount,
//         //     minAmountOut,
//         //     path,
//         //     address(this),
//         //     deadline
//         // );

// //         // uint256 receivedAmount = amounts[amounts.length - 1];

IERC20(op.collateralAsset).approve(address(permit2), type(uint256).max);
IERC20(op.targetAsset).approve(address(permit2), type(uint256).max);
permit2.approve(op.collateralAsset, address(router), op.aIn, uint48(block.timestamp + 8600));
permit2.approve(op.targetAsset, address(router), op.aIn, uint48(block.timestamp + 8600));

bytes memory commands = abi.encodePacked(uint8(0x10));
bytes[] memory inputs = new bytes[](1);

// // Encode V4Router actions
bytes memory actions = abi.encodePacked(
uint8(Actions.SWAP_EXACT_IN_SINGLE),
uint8(Actions.SETTLE_ALL),
uint8(Actions.TAKE_ALL)
);

// // Prepare parameters for each action - direction depends on isReverse flag
bytes[] memory swapParams = new bytes[](3);

if (op.isReverse) {
    // Reverse direction: swap from currency0 to currency1 (zeroForOne: true)
    swapParams[0] = abi.encode(
    IV4Router.ExactInputSingleParams({
    poolKey: op.daKey,
    zeroForOne: false,
    amountIn: op.aIn,
    amountOutMinimum: op.minOut,
    hookData: bytes("")
    })
    );
    swapParams[1] = abi.encode(op.daKey.currency0, op.aIn); // Settle currency0 (collateralAsset)
    swapParams[2] = abi.encode(op.daKey.currency1, op.minOut); // Take currency1 (targetAsset)
} else {
    // Normal direction: swap from currency1 to currency0 (zeroForOne: false)
    swapParams[0] = abi.encode(
    IV4Router.ExactInputSingleParams({
    poolKey: op.daKey,
    zeroForOne: false,
    amountIn: op.aIn,
    amountOutMinimum: op.minOut,
    hookData: bytes("")
    })
    );
    swapParams[1] = abi.encode(op.daKey.currency1, op.aIn); // Settle currency1 (collateralAsset)
    swapParams[2] = abi.encode(op.daKey.currency0, op.minOut); // Take currency0 (targetAsset)
}

// // // Combine actions and params into inputs
inputs[0] = abi.encode(actions, swapParams);
// Execute the swap
uint256 balanceBefore = IERC20(op.targetAsset).balanceOf(address(this));
uint256 deadline = block.timestamp + 20;
router.execute(commands, inputs, deadline);
uint256 receivedAmount = IERC20(op.targetAsset).balanceOf(address(this)) - balanceBefore;




// // //         // 4. Supply swapped asset as new collateral to Aave
// // //     IERC20(op.collateralAsset).approve(_poolAddress, type(uint256).max);
// // //     pool.supply(op.collateralAsset, op.amount, address(this), 0);
// // //     pool.setUserUseReserveAsCollateral(op.collateralAsset, false);
//         IERC20(op.targetAsset).approve(_poolAddress, type(uint256).max);
//         IPool(0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2).supply(op.targetAsset, receivedAmount, address(this), 0);
// //            // Disable original collateral asset if doing reverse swap
//         // if (op.isReverse) {
//         //     IPool(0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2).setUserUseReserveAsCollateral(op.collateralAsset, false);
//         // }
//         IPool(0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2).setUserUseReserveAsCollateral(op.targetAsset, true);
        

        
//          IPool(0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2).borrow(op.borrowT, amountBorrowed, op.rateMode, 0, address(this));

//         // 5. Set asset as collateral (if needed, this is protocol-specific and may require a separate call)
//         // (Assume asset is enabled as collateral by default, or add logic if needed)

//         // 6. Borrow USDC against new collateral
    uint256 repayAmount = amount + premium;
    //pool.borrow(op.borrowT, op.amountToBorrow, op.rateMode, 0, address(this));

        // 7. Repay flashloan with borrowed USDC
        IERC20(asset).approve(address(pool), repayAmount);

        return true;
    }
}"
    },
    "lib/universal-router/contracts/UniversalRouter.sol": {
      "content": "// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.17;

// Command implementations
import {Dispatcher} from './base/Dispatcher.sol';
import {RewardsCollector} from './base/RewardsCollector.sol';
import {RouterParameters} from './base/RouterImmutables.sol';
import {PaymentsImmutables, PaymentsParameters} from './modules/PaymentsImmutables.sol';
import {NFTImmutables, NFTParameters} from './modules/NFTImmutables.sol';
import {UniswapImmutables, UniswapParameters} from './modules/uniswap/UniswapImmutables.sol';
import {Commands} from './libraries/Commands.sol';
import {IUniversalRouter} from './interfaces/IUniversalRouter.sol';

contract UniversalRouter is IUniversalRouter, Dispatcher, RewardsCollector {
    modifier checkDeadline(uint256 deadline) {
        if (block.timestamp > deadline) revert TransactionDeadlinePassed();
        _;
    }

    constructor(RouterParameters memory params)
        UniswapImmutables(
            UniswapParameters(params.v2Factory, params.v3Factory, params.pairInitCodeHash, params.poolInitCodeHash)
        )
        PaymentsImmutables(PaymentsParameters(params.permit2, params.weth9, params.openseaConduit, params.sudoswap))
        NFTImmutables(
            NFTParameters(
                params.seaportV1_5,
                params.seaportV1_4,
                params.nftxZap,
                params.x2y2,
                params.foundation,
                params.sudoswap,
                params.elementMarket,
                params.nft20Zap,
                params.cryptopunks,
                params.looksRareV2,
                params.routerRewardsDistributor,
                params.looksRareRewardsDistributor,
                params.looksRareToken
            )
        )
    {}

    /// @inheritdoc IUniversalRouter
    function execute(bytes calldata commands, bytes[] calldata inputs, uint256 deadline)
        external
        payable
        checkDeadline(deadline)
    {
        execute(commands, inputs);
    }

    /// @inheritdoc Dispatcher
    function execute(bytes calldata commands, bytes[] calldata inputs) public payable override isNotLocked {
        bool success;
        bytes memory output;
        uint256 numCommands = commands.length;
        if (inputs.length != numCommands) revert LengthMismatch();

        // loop through all given commands, execute them and pass along outputs as defined
        for (uint256 commandIndex = 0; commandIndex < numCommands;) {
            bytes1 command = commands[commandIndex];

            bytes calldata input = inputs[commandIndex];

            (success, output) = dispatch(command, input);

            if (!success && successRequired(command)) {
                revert ExecutionFailed({commandIndex: commandIndex, message: output});
            }

            unchecked {
                commandIndex++;
            }
        }
    }

    function successRequired(bytes1 command) internal pure returns (bool) {
        return command & Commands.FLAG_ALLOW_REVERT == 0;
    }

    /// @notice To receive ETH from WETH and NFT protocols
    receive() external payable {}
}
"
    },
    "lib/universal-router/contracts/libraries/Commands.sol": {
      "content": "// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.17;

/// @title Commands
/// @notice Command Flags used to decode commands
library Commands {
    // Masks to extract certain bits of commands
    bytes1 internal constant FLAG_ALLOW_REVERT = 0x80;
    bytes1 internal constant COMMAND_TYPE_MASK = 0x3f;

    // Command Types. Maximum supported command at this moment is 0x3f.

    // Command Types where value<0x08, executed in the first nested-if block
    uint256 constant V3_SWAP_EXACT_IN = 0x00;
    uint256 constant V3_SWAP_EXACT_OUT = 0x01;
    uint256 constant PERMIT2_TRANSFER_FROM = 0x02;
    uint256 constant PERMIT2_PERMIT_BATCH = 0x03;
    uint256 constant SWEEP = 0x04;
    uint256 constant TRANSFER = 0x05;
    uint256 constant PAY_PORTION = 0x06;
    // COMMAND_PLACEHOLDER = 0x07;

    // The commands are executed in nested if blocks to minimise gas consumption
    // The following constant defines one of the boundaries where the if blocks split commands
    uint256 constant FIRST_IF_BOUNDARY = 0x08;

    // Command Types where 0x08<=value<=0x0f, executed in the second nested-if block
    uint256 constant V2_SWAP_EXACT_IN = 0x08;
    uint256 constant V2_SWAP_EXACT_OUT = 0x09;
    uint256 constant PERMIT2_PERMIT = 0x0a;
    uint256 constant WRAP_ETH = 0x0b;
    uint256 constant UNWRAP_WETH = 0x0c;
    uint256 constant PERMIT2_TRANSFER_FROM_BATCH = 0x0d;
    uint256 constant BALANCE_CHECK_ERC20 = 0x0e;
    // COMMAND_PLACEHOLDER = 0x0f;

    // The commands are executed in nested if blocks to minimise gas consumption
    // The following constant defines one of the boundaries where the if blocks split commands
    uint256 constant SECOND_IF_BOUNDARY = 0x10;

    // Command Types where 0x10<=value<0x18, executed in the third nested-if block
    uint256 constant SEAPORT_V1_5 = 0x10;
    uint256 constant LOOKS_RARE_V2 = 0x11;
    uint256 constant NFTX = 0x12;
    uint256 constant CRYPTOPUNKS = 0x13;
    // 0x14;
    uint256 constant OWNER_CHECK_721 = 0x15;
    uint256 constant OWNER_CHECK_1155 = 0x16;
    uint256 constant SWEEP_ERC721 = 0x17;

    // The commands are executed in nested if blocks to minimise gas consumption
    // The following constant defines one of the boundaries where the if blocks split commands
    uint256 constant THIRD_IF_BOUNDARY = 0x18;

    // Command Types where 0x18<=value<=0x1f, executed in the final nested-if block
    uint256 constant X2Y2_721 = 0x18;
    uint256 constant SUDOSWAP = 0x19;
    uint256 constant NFT20 = 0x1a;
    uint256 constant X2Y2_1155 = 0x1b;
    uint256 constant FOUNDATION = 0x1c;
    uint256 constant SWEEP_ERC1155 = 0x1d;
    uint256 constant ELEMENT_MARKET = 0x1e;
    // COMMAND_PLACEHOLDER = 0x1f;

    // The commands are executed in nested if blocks to minimise gas consumption
    // The following constant defines one of the boundaries where the if blocks split commands
    uint256 constant FOURTH_IF_BOUNDARY = 0x20;

    // Command Types where 0x20<=value
    uint256 constant SEAPORT_V1_4 = 0x20;
    uint256 constant EXECUTE_SUB_PLAN = 0x21;
    uint256 constant APPROVE_ERC20 = 0x22;
    // COMMAND_PLACEHOLDER for 0x23 to 0x3f (all unused)
}
"
    },
    "lib/v4-core/src/interfaces/IPoolManager.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;

import {Currency} from "../types/Currency.sol";
import {PoolKey} from "../types/PoolKey.sol";
import {IHooks} from "./IHooks.sol";
import {IERC6909Claims} from "./external/IERC6909Claims.sol";
import {IProtocolFees} from "./IProtocolFees.sol";
import {BalanceDelta} from "../types/BalanceDelta.sol";
import {PoolId} from "../types/PoolId.sol";
import {IExtsload} from "./IExtsload.sol";
import {IExttload} from "./IExttload.sol";

/// @notice Interface for the PoolManager
interface IPoolManager is IProtocolFees, IERC6909Claims, IExtsload, IExttload {
    /// @notice Thrown when a currency is not netted out after the contract is unlocked
    error CurrencyNotSettled();

    /// @notice Thrown when trying to interact with a non-initialized pool
    error PoolNotInitialized();

    /// @notice Thrown when unlock is called, but the contract is already unlocked
    error AlreadyUnlocked();

    /// @notice Thrown when a function is called that requires the contract to be unlocked, but it is not
    error ManagerLocked();

    /// @notice Pools are limited to type(int16).max tickSpacing in #initialize, to prevent overflow
    error TickSpacingTooLarge(int24 tickSpacing);

    /// @notice Pools must have a positive non-zero tickSpacing passed to #initialize
    error TickSpacingTooSmall(int24 tickSpacing);

    /// @notice PoolKey must have currencies where address(currency0) < address(currency1)
    error CurrenciesOutOfOrderOrEqual(address currency0, address currency1);

    /// @notice Thrown when a call to updateDynamicLPFee is made by an address that is not the hook,
    /// or on a pool that does not have a dynamic swap fee.
    error UnauthorizedDynamicLPFeeUpdate();

    /// @notice Thrown when trying to swap amount of 0
    error SwapAmountCannotBeZero();

    ///@notice Thrown when native currency is passed to a non native settlement
    error NonzeroNativeValue();

    /// @notice Thrown when `clear` is called with an amount that is not exactly equal to the open currency delta.
    error MustClearExactPositiveDelta();

    /// @notice Emitted when a new pool is initialized
    /// @param id The abi encoded hash of the pool key struct for the new pool
    /// @param currency0 The first currency of the pool by address sort order
    /// @param currency1 The second currency of the pool by address sort order
    /// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// @param tickSpacing The minimum number of ticks between initialized ticks
    /// @param hooks The hooks contract address for the pool, or address(0) if none
    /// @param sqrtPriceX96 The price of the pool on initialization
    /// @param tick The initial tick of the pool corresponding to the initialized price
    event Initialize(
        PoolId indexed id,
        Currency indexed currency0,
        Currency indexed currency1,
        uint24 fee,
        int24 tickSpacing,
        IHooks hooks,
        uint160 sqrtPriceX96,
        int24 tick
    );

    /// @notice Emitted when a liquidity position is modified
    /// @param id The abi encoded hash of the pool key struct for the pool that was modified
    /// @param sender The address that modified the pool
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param liquidityDelta The amount of liquidity that was added or removed
    /// @param salt The extra data to make positions unique
    event ModifyLiquidity(
        PoolId indexed id, address indexed sender, int24 tickLower, int24 tickUpper, int256 liquidityDelta, bytes32 salt
    );

    /// @notice Emitted for swaps between currency0 and currency1
    /// @param id The abi encoded hash of the pool key struct for the pool that was modified
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param amount0 The delta of the currency0 balance of the pool
    /// @param amount1 The delta of the currency1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of the price of the pool after the swap
    /// @param fee The swap fee in hundredths of a bip
    event Swap(
        PoolId indexed id,
        address indexed sender,
        int128 amount0,
        int128 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick,
        uint24 fee
    );

    /// @notice Emitted for donations
    /// @param id The abi encoded hash of the pool key struct for the pool that was donated to
    /// @param sender The address that initiated the donate call
    /// @param amount0 The amount donated in currency0
    /// @param amount1 The amount donated in currency1
    event Donate(PoolId indexed id, address indexed sender, uint256 amount0, uint256 amount1);

    /// @notice All interactions on the contract that account deltas require unlocking. A caller that calls `unlock` must implement
    /// `IUnlockCallback(msg.sender).unlockCallback(data)`, where they interact with the remaining functions on this contract.
    /// @dev The only functions callable without an unlocking are `initialize` and `updateDynamicLPFee`
    /// @param data Any data to pass to the callback, via `IUnlockCallback(msg.sender).unlockCallback(data)`
    /// @return The data returned by the call to `IUnlockCallback(msg.sender).unlockCallback(data)`
    function unlock(bytes calldata data) external returns (bytes memory);

    /// @notice Initialize the state for a given pool ID
    /// @dev A swap fee totaling MAX_SWAP_FEE (100%) makes exact output swaps impossible since the input is entirely consumed by the fee
    /// @param key The pool key for the pool to initialize
    /// @param sqrtPriceX96 The initial square root price
    /// @return tick The initial tick of the pool
    function initialize(PoolKey memory key, uint160 sqrtPriceX96) external returns (int24 tick);

    struct ModifyLiquidityParams {
        // the lower and upper tick of the position
        int24 tickLower;
        int24 tickUpper;
        // how to modify the liquidity
        int256 liquidityDelta;
        // a value to set if you want unique liquidity positions at the same range
        bytes32 salt;
    }

    /// @notice Modify the liquidity for the given pool
    /// @dev Poke by calling with a zero liquidityDelta
    /// @param key The pool to modify liquidity in
    /// @param params The parameters for modifying the liquidity
    /// @param hookData The data to pass through to the add/removeLiquidity hooks
    /// @return callerDelta The balance delta of the caller of modifyLiquidity. This is the total of both principal, fee deltas, and hook deltas if applicable
    /// @return feesAccrued The balance delta of the fees generated in the liquidity range. Returned for informational purposes
    /// @dev Note that feesAccrued can be artificially inflated by a malicious actor and integrators should be careful using the value
    /// For pools with a single liquidity position, actors can donate to themselves to inflate feeGrowthGlobal (and consequently feesAccrued)
    /// atomically donating and collecting fees in the same unlockCallback may make the inflated value more extreme
    function modifyLiquidity(PoolKey memory key, ModifyLiquidityParams memory params, bytes calldata hookData)
        external
        returns (BalanceDelta callerDelta, BalanceDelta feesAccrued);

    struct SwapParams {
        /// Whether to swap token0 for token1 or vice versa
        bool zeroForOne;
        /// The desired input amount if negative (exactIn), or the desired output amount if positive (exactOut)
        int256 amountSpecified;
        /// The sqrt price at which, if reached, the swap will stop executing
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swap against the given pool
    /// @param key The pool to swap in
    /// @param params The parameters for swapping
    /// @param hookData The data to pass through to the swap hooks
    /// @return swapDelta The balance delta of the address swapping
    /// @dev Swapping on low liquidity pools may cause unexpected swap amounts when liquidity available is less than amountSpecified.
    /// Additionally note that if interacting with hooks that have the BEFORE_SWAP_RETURNS_DELTA_FLAG or AFTER_SWAP_RETURNS_DELTA_FLAG
    /// the hook may alter the swap input/output. Integrators should perform checks on the returned swapDelta.
    function swap(PoolKey memory key, SwapParams memory params, bytes calldata hookData)
        external
        returns (BalanceDelta swapDelta);

    /// @notice Donate the given currency amounts to the in-range liquidity providers of a pool
    /// @dev Calls to donate can be frontrun adding just-in-time liquidity, with the aim of receiving a portion donated funds.
    /// Donors should keep this in mind when designing donation mechanisms.
    /// @dev This function donates to in-range LPs at slot0.tick. In certain edge-cases of the swap algorithm, the `sqrtPrice` of
    /// a pool can be at the lower boundary of tick `n`, but the `slot0.tick` of the pool is already `n - 1`. In this case a call to
    /// `donate` would donate to tick `n - 1` (slot0.tick) not tick `n` (getTickAtSqrtPrice(slot0.sqrtPriceX96)).
    /// Read the comments in `Pool.swap()` for more information about this.
    /// @param key The key of the pool to donate to
    /// @param amount0 The amount of currency0 to donate
    /// @param amount1 The amount of currency1 to donate
    /// @param hookData The data to pass through to the donate hooks
    /// @return BalanceDelta The delta of the caller after the donate
    function donate(PoolKey memory key, uint256 amount0, uint256 amount1, bytes calldata hookData)
        external
        returns (BalanceDelta);

    /// @notice Writes the current ERC20 balance of the specified currency to transient storage
    /// This is used to checkpoint balances for the manager and derive deltas for the caller.
    /// @dev This MUST be called before any ERC20 tokens are sent into the contract, but can be skipped
    /// for native tokens because the amount to settle is determined by the sent value.
    /// However, if an ERC20 token has been synced and not settled, and the caller instead wants to settle
    /// native funds, this function can be called with the native currency to then be able to settle the native currency
    function sync(Currency currency) external;

    /// @notice Called by the user to net out some value owed to the user
    /// @dev Will revert if the requested amount is not available, consider using `mint` instead
    /// @dev Can also be used as a mechanism for free flash loans
    /// @param currency The currency to withdraw from the pool manager
    /// @param to The address to withdraw to
    /// @param amount The amount of currency to withdraw
    function take(Currency currency, address to, uint256 amount) external;

    /// @notice Called by the user to pay what is owed
    /// @return paid The amount of currency settled
    function settle() external payable returns (uint256 paid);

    /// @notice Called by the user to pay on behalf of another address
    /// @param recipient The address to credit for the payment
    /// @return paid The amount of currency settled
    function settleFor(address recipient) external payable returns (uint256 paid);

    /// @notice WARNING - Any currency that is cleared, will be non-retrievable, and locked in the contract permanently.
    /// A call to clear will zero out a positive balance WITHOUT a corresponding transfer.
    /// @dev This could be used to clear a balance that is considered dust.
    /// Additionally, the amount must be the exact positive balance. This is to enforce that the caller is aware of the amount being cleared.
    function clear(Currency currency, uint256 amount) external;

    /// @notice Called by the user to move value into ERC6909 balance
    /// @param to The address to mint the tokens to
    /// @param id The currency address to mint to ERC6909s, as a uint256
    /// @param amount The amount of currency to mint
    /// @dev The id is converted to a uint160 to correspond to a currency address
    /// If the upper 12 bytes are not 0, they will be 0-ed out
    function mint(address to, uint256 id, uint256 amount) external;

    /// @notice Called by the user to move value from ERC6909 balance
    /// @param from The address to burn the tokens from
    /// @param id The currency address to burn from ERC6909s, as a uint256
    /// @param amount The amount of currency to burn
    /// @dev The id is converted to a uint160 to correspond to a currency address
    /// If the upper 12 bytes are not 0, they will be 0-ed out
    function burn(address from, uint256 id, uint256 amount) external;

    /// @notice Updates the pools lp fees for the a pool that has enabled dynamic lp fees.
    /// @dev A swap fee totaling MAX_SWAP_FEE (100%) makes exact output swaps impossible since the input is entirely consumed by the fee
    /// @param key The key of the pool to update dynamic LP fees for
    /// @param newDynamicLPFee The new dynamic pool LP fee
    function updateDynamicLPFee(PoolKey memory key, uint24 newDynamicLPFee) external;
}
"
    },
    "lib/v4-periphery/src/interfaces/IV4Router.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {PoolKey} from "@uniswap/v4-core/src/types/PoolKey.sol";
import {Currency} from "@uniswap/v4-core/src/types/Currency.sol";
import {PathKey} from "../libraries/PathKey.sol";
import {IImmutableState} from "./IImmutableState.sol";

/// @title IV4Router
/// @notice Interface for the V4Router contract
interface IV4Router is IImmutableState {
    /// @notice Emitted when an exactInput swap does not receive its minAmountOut
    error V4TooLittleReceived(uint256 minAmountOutReceived, uint256 amountReceived);
    /// @notice Emitted when an exactOutput is asked for more than its maxAmountIn
    error V4TooMuchRequested(uint256 maxAmountInRequested, uint256 amountRequested);

    /// @notice Parameters for a single-hop exact-input swap
    struct ExactInputSingleParams {
        PoolKey poolKey;
        bool zeroForOne;
        uint128 amountIn;
        uint128 amountOutMinimum;
        bytes hookData;
    }

    /// @notice Parameters for a multi-hop exact-input swap
    struct ExactInputParams {
        Currency currencyIn;
        PathKey[] path;
        uint128 amountIn;
        uint128 amountOutMinimum;
    }

    /// @notice Parameters for a single-hop exact-output swap
    struct ExactOutputSingleParams {
        PoolKey poolKey;
        bool zeroForOne;
        uint128 amountOut;
        uint128 amountInMaximum;
        bytes hookData;
    }

    /// @notice Parameters for a multi-hop exact-output swap
    struct ExactOutputParams {
        Currency currencyOut;
        PathKey[] path;
        uint128 amountOut;
        uint128 amountInMaximum;
    }
}
"
    },
    "lib/v4-periphery/src/libraries/Actions.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice Library to define different pool actions.
/// @dev These are suggested common commands, however additional commands should be defined as required
/// Some of these actions are not supported in the Router contracts or Position Manager contracts, but are left as they may be helpful commands for other peripheral contracts.
library Actions {
    // pool actions
    // liquidity actions
    uint256 internal constant INCREASE_LIQUIDITY = 0x00;
    uint256 internal constant DECREASE_LIQUIDITY = 0x01;
    uint256 internal constant MINT_POSITION = 0x02;
    uint256 internal constant BURN_POSITION = 0x03;
    uint256 internal constant INCREASE_LIQUIDITY_FROM_DELTAS = 0x04;
    uint256 internal constant MINT_POSITION_FROM_DELTAS = 0x05;

    // swapping
    uint256 internal constant SWAP_EXACT_IN_SINGLE = 0x06;
    uint256 internal constant SWAP_EXACT_IN = 0x07;
    uint256 internal constant SWAP_EXACT_OUT_SINGLE = 0x08;
    uint256 internal constant SWAP_EXACT_OUT = 0x09;

    // donate
    // note this is not supported in the position manager or router
    uint256 internal constant DONATE = 0x0a;

    // closing deltas on the pool manager
    // settling
    uint256 internal constant SETTLE = 0x0b;
    uint256 internal constant SETTLE_ALL = 0x0c;
    uint256 internal constant SETTLE_PAIR = 0x0d;
    // taking
    uint256 internal constant TAKE = 0x0e;
    uint256 internal constant TAKE_ALL = 0x0f;
    uint256 internal constant TAKE_PORTION = 0x10;
    uint256 internal constant TAKE_PAIR = 0x11;

    uint256 internal constant CLOSE_CURRENCY = 0x12;
    uint256 internal constant CLEAR_OR_TAKE = 0x13;
    uint256 internal constant SWEEP = 0x14;

    uint256 internal constant WRAP = 0x15;
    uint256 internal constant UNWRAP = 0x16;

    // minting/burning 6909s to close deltas
    // note this is not supported in the position manager or router
    uint256 internal constant MINT_6909 = 0x17;
    uint256 internal constant BURN_6909 = 0x18;
}
"
    },
    "lib/permit2/src/interfaces/IPermit2.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ISignatureTransfer} from "./ISignatureTransfer.sol";
import {IAllowanceTransfer} from "./IAllowanceTransfer.sol";

/// @notice Permit2 handles signature-based transfers in SignatureTransfer and allowance-based transfers in AllowanceTransfer.
/// @dev Users must approve Permit2 before calling any of the transfer functions.
interface IPermit2 is ISignatureTransfer, IAllowanceTransfer {
// IPermit2 unifies the two interfaces so users have maximal flexibility with their approval.
}
"
    },
    "lib/v4-core/src/libraries/StateLibrary.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {PoolId} from "../types/PoolId.sol";
import {IPoolManager} from "../interfaces/IPoolManager.sol";
import {Position} from "./Position.sol";

/// @notice A helper library to provide state getters that use extsload
library StateLibrary {
    /// @notice index of pools mapping in the PoolManager
    bytes32 public constant POOLS_SLOT = bytes32(uint256(6));

    /// @notice index of feeGrowthGlobal0X128 in Pool.State
    uint256 public constant FEE_GROWTH_GLOBAL0_OFFSET = 1;

    // feeGrowthGlobal1X128 offset in Pool.State = 2

    /// @notice index of liquidity in Pool.State
    uint256 public constant LIQUIDITY_OFFSET = 3;

    /// @notice index of TicksInfo mapping in Pool.State: mapping(int24 => TickInfo) ticks;
    uint256 public constant TICKS_OFFSET = 4;

    /// @notice index of tickBitmap mapping in Pool.State
    uint256 public constant TICK_BITMAP_OFFSET = 5;

    /// @notice index of Position.State mapping in Pool.State: mapping(bytes32 => Position.State) positions;
    uint256 public constant POSITIONS_OFFSET = 6;

    /**
     * @notice Get Slot0 of the pool: sqrtPriceX96, tick, protocolFee, lpFee
     * @dev Corresponds to pools[poolId].slot0
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @return sqrtPriceX96 The square root of the price of the pool, in Q96 precision.
     * @return tick The current tick of the pool.
     * @return protocolFee The protocol fee of the pool.
     * @return lpFee The swap fee of the pool.
     */
    function getSlot0(IPoolManager manager, PoolId poolId)
        internal
        view
        returns (uint160 sqrtPriceX96, int24 tick, uint24 protocolFee, uint24 lpFee)
    {
        // slot key of Pool.State value: `pools[poolId]`
        bytes32 stateSlot = _getPoolStateSlot(poolId);

        bytes32 data = manager.extsload(stateSlot);

        //   24 bits  |24bits|24bits      |24 bits|160 bits
        // 0x000000   |000bb8|000000      |ffff75 |0000000000000000fe3aa841ba359daa0ea9eff7
        // ---------- | fee  |protocolfee | tick  | sqrtPriceX96
        assembly ("memory-safe") {
            // bottom 160 bits of data
            sqrtPriceX96 := and(data, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
            // next 24 bits of data
            tick := signextend(2, shr(160, data))
            // next 24 bits of data
            protocolFee := and(shr(184, data), 0xFFFFFF)
            // last 24 bits of data
            lpFee := and(shr(208, data), 0xFFFFFF)
        }
    }

    /**
     * @notice Retrieves the tick information of a pool at a specific tick.
     * @dev Corresponds to pools[poolId].ticks[tick]
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @param tick The tick to retrieve information for.
     * @return liquidityGross The total position liquidity that references this tick
     * @return liquidityNet The amount of net liquidity added (subtracted) when tick is crossed from left to right (right to left)
     * @return feeGrowthOutside0X128 fee growth per unit of liquidity on the _other_ side of this tick (relative to the current tick)
     * @return feeGrowthOutside1X128 fee growth per unit of liquidity on the _other_ side of this tick (relative to the current tick)
     */
    function getTickInfo(IPoolManager manager, PoolId poolId, int24 tick)
        internal
        view
        returns (
            uint128 liquidityGross,
            int128 liquidityNet,
            uint256 feeGrowthOutside0X128,
            uint256 feeGrowthOutside1X128
        )
    {
        bytes32 slot = _getTickInfoSlot(poolId, tick);

        // read all 3 words of the TickInfo struct
        bytes32[] memory data = manager.extsload(slot, 3);
        assembly ("memory-safe") {
            let firstWord := mload(add(data, 32))
            liquidityNet := sar(128, firstWord)
            liquidityGross := and(firstWord, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
            feeGrowthOutside0X128 := mload(add(data, 64))
            feeGrowthOutside1X128 := mload(add(data, 96))
        }
    }

    /**
     * @notice Retrieves the liquidity information of a pool at a specific tick.
     * @dev Corresponds to pools[poolId].ticks[tick].liquidityGross and pools[poolId].ticks[tick].liquidityNet. A more gas efficient version of getTickInfo
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @param tick The tick to retrieve liquidity for.
     * @return liquidityGross The total position liquidity that references this tick
     * @return liquidityNet The amount of net liquidity added (subtracted) when tick is crossed from left to right (right to left)
     */
    function getTickLiquidity(IPoolManager manager, PoolId poolId, int24 tick)
        internal
        view
        returns (uint128 liquidityGross, int128 liquidityNet)
    {
        bytes32 slot = _getTickInfoSlot(poolId, tick);

        bytes32 value = manager.extsload(slot);
        assembly ("memory-safe") {
            liquidityNet := sar(128, value)
            liquidityGross := and(value, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
        }
    }

    /**
     * @notice Retrieves the fee growth outside a tick range of a pool
     * @dev Corresponds to pools[poolId].ticks[tick].feeGrowthOutside0X128 and pools[poolId].ticks[tick].feeGrowthOutside1X128. A more gas efficient version of getTickInfo
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @param tick The tick to retrieve fee growth for.
     * @return feeGrowthOutside0X128 fee growth per unit of liquidity on the _other_ side of this tick (relative to the current tick)
     * @return feeGrowthOutside1X128 fee growth per unit of liquidity on the _other_ side of this tick (relative to the current tick)
     */
    function getTickFeeGrowthOutside(IPoolManager manager, PoolId poolId, int24 tick)
        internal
        view
        returns (uint256 feeGrowthOutside0X128, uint256 feeGrowthOutside1X128)
    {
        bytes32 slot = _getTickInfoSlot(poolId, tick);

        // offset by 1 word, since the first word is liquidityGross + liquidityNet
        bytes32[] memory data = manager.extsload(bytes32(uint256(slot) + 1), 2);
        assembly ("memory-safe") {
            feeGrowthOutside0X128 := mload(add(data, 32))
            feeGrowthOutside1X128 := mload(add(data, 64))
        }
    }

    /**
     * @notice Retrieves the global fee growth of a pool.
     * @dev Corresponds to pools[poolId].feeGrowthGlobal0X128 and pools[poolId].feeGrowthGlobal1X128
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @return feeGrowthGlobal0 The global fee growth for token0.
     * @return feeGrowthGlobal1 The global fee growth for token1.
     * @dev Note that feeGrowthGlobal can be artificially inflated
     * For pools with a single liquidity position, actors can donate to themselves to freely inflate feeGrowthGlobal
     * atomically donating and collecting fees in the same unlockCallback may make the inflated value more extreme
     */
    function getFeeGrowthGlobals(IPoolManager manager, PoolId poolId)
        internal
        view
        returns (uint256 feeGrowthGlobal0, uint256 feeGrowthGlobal1)
    {
        // slot key of Pool.State value: `pools[poolId]`
        bytes32 stateSlot = _getPoolStateSlot(poolId);

        // Pool.State, `uint256 feeGrowthGlobal0X128`
        bytes32 slot_feeGrowthGlobal0X128 = bytes32(uint256(stateSlot) + FEE_GROWTH_GLOBAL0_OFFSET);

        // read the 2 words of feeGrowthGlobal
        bytes32[] memory data = manager.extsload(slot_feeGrowthGlobal0X128, 2);
        assembly ("memory-safe") {
            feeGrowthGlobal0 := mload(add(data, 32))
            feeGrowthGlobal1 := mload(add(data, 64))
        }
    }

    /**
     * @notice Retrieves total the liquidity of a pool.
     * @dev Corresponds to pools[poolId].liquidity
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @return liquidity The liquidity of the pool.
     */
    function getLiquidity(IPoolManager manager, PoolId poolId) internal view returns (uint128 liquidity) {
        // slot key of Pool.State value: `pools[poolId]`
        bytes32 stateSlot = _getPoolStateSlot(poolId);

        // Pool.State: `uint128 liquidity`
        bytes32 slot = bytes32(uint256(stateSlot) + LIQUIDITY_OFFSET);

        liquidity = uint128(uint256(manager.extsload(slot)));
    }

    /**
     * @notice Retrieves the tick bitmap of a pool at a specific tick.
     * @dev Corresponds to pools[poolId].tickBitmap[tick]
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @param tick The tick to retrieve the bitmap for.
     * @return tickBitmap The bitmap of the tick.
     */
    function getTickBitmap(IPoolManager manager, PoolId poolId, int16 tick)
        internal
        view
        returns (uint256 tickBitmap)
    {
        // slot key of Pool.State value: `pools[poolId]`
        bytes32 stateSlot = _getPoolStateSlot(poolId);

        // Pool.State: `mapping(int16 => uint256) tickBitmap;`
        bytes32 tickBitmapMapping = bytes32(uint256(stateSlot) + TICK_BITMAP_OFFSET);

        // slot id of the mapping key: `pools[poolId].tickBitmap[tick]
        bytes32 slot = keccak256(abi.encodePacked(int256(tick), tickBitmapMapping));

        tickBitmap = uint256(manager.extsload(slot));
    }

    /**
     * @notice Retrieves the position information of a pool without needing to calculate the `positionId`.
     * @dev Corresponds to pools[poolId].positions[positionId]
     * @param poolId The ID of the pool.
     * @param owner The owner of the liquidity position.
     * @param tickLower The lower tick of the liquidity range.
     * @param tickUpper The upper tick of the liquidity range.
     * @param salt The bytes32 randomness to further distinguish position state.
     * @return liquidity The liquidity of the position.
     * @return feeGrowthInside0LastX128 The fee growth inside the position for token0.
     * @return feeGrowthInside1LastX128 The fee growth inside the position for token1.
     */
    function getPositionInfo(
        IPoolManager manager,
        PoolId poolId,
        address owner,
        int24 tickLower,
        int24 tickUpper,
        bytes32 salt
    ) internal view returns (uint128 liquidity, uint256 feeGrowthInside0LastX128, uint256 feeGrowthInside1LastX128) {
        // positionKey = keccak256(abi.encodePacked(owner, tickLower, tickUpper, salt))
        bytes32 positionKey = Position.calculatePositionKey(owner, tickLower, tickUpper, salt);

        (liquidity, feeGrowthInside0LastX128, feeGrowthInside1LastX128) = getPositionInfo(manager, poolId, positionKey);
    }

    /**
     * @notice Retrieves the position information of a pool at a specific position ID.
     * @dev Corresponds to pools[poolId].positions[positionId]
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @param positionId The ID of the position.
     * @return liquidity The liquidity of the position.
     * @return feeGrowthInside0LastX128 The fee growth inside the position for token0.
     * @return feeGrowthInside1LastX128 The fee growth inside the position for token1.
     */
    function getPositionInfo(IPoolManager manager, PoolId poolId, bytes32 positionId)
        internal
        view
        returns (uint128 liquidity, uint256 feeGrowthInside0LastX128, uint256 feeGrowthInside1LastX128)
    {
        bytes32 slot = _getPositionInfoSlot(poolId, positionId);

        // read all 3 words of the Position.State struct
        bytes32[] memory data = manager.extsload(slot, 3);

        assembly ("memory-safe") {
            liquidity := mload(add(data, 32))
            feeGrowthInside0LastX128 := mload(add(data, 64))
            feeGrowthInside1LastX128 := mload(add(data, 96))
        }
    }

    /**
     * @notice Retrieves the liquidity of a position.
     * @dev Corresponds to pools[poolId].positions[positionId].liquidity. More gas efficient for just retrieiving liquidity as compared to getPositionInfo
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @param positionId The ID of the position.
     * @return liquidity The liquidity of the position.
     */
    function getPositionLiquidity(IPoolManager manager, PoolId poolId, bytes32 positionId)
        internal
        view
        returns (uint128 liquidity)
    {
        bytes32 slot = _getPositionInfoSlot(poolId, positionId);
        liquidity = uint128(uint256(manager.extsload(slot)));
    }

    /**
     * @notice Calculate the fee growth inside a tick range of a pool
     * @dev pools[poolId].feeGrowthInside0LastX128 in Position.State is cached and can become stale. This function will calculate the up to date feeGrowthInside
     * @param manager The pool manager contract.
     * @param poolId The ID of the pool.
     * @param tickLower The lower tick of the range.
     * @param tickUpper The upper tick of the range.
     * @return feeGrowthInside0X128 The fee growth inside the tick range for token0.
     * @return feeGrowthInside1X128 The fee growth inside the tick range for token1.
     */
    function getFeeGrowthInside(IPoolManager manager, PoolId poolId, int24 tickLower, int24 tickUpper)
        internal
        view
        returns (uint256 feeGrowthInside0X128, uint256 feeGrowthInside1X128)
    {
        (uint256 feeGrowthGlobal0X128, uint256 feeGrowthGlobal1X128) = getFeeGrowthGlobals(manager, poolId);

        (uint256 lowerFeeGrowthOutside0X128, uint256 lowerFeeGrowthOutside1X128) =
            getTickFeeGrowthOutside(manager, poolId, tickLower);
        (uint256 upperFeeGrowthOutside0X128, uint256 upperFeeGrowthOutside1X128) =
            getTickFeeGrowthOutside(manager, poolId, tickUpper);
        (, int24 tickCurrent,,) = getSlot0(manager, poolId);
        unchecked {
            if (tickCurrent < tickLower) {
                feeGrowthInside0X128 = lowerFeeGrowthOutside0X128 - upperFeeGrowthOutside0X128;
                feeGrowthInside1X128 = lowerFeeGrowthOutside1X128 - upperFeeGrowthOutside1X128;
            } else if (tickCurrent >= tickUpper) {
                feeGrowthInside0X128 = upperFeeGrowthOutside0X128 - lowerFeeGrowthOutside0X128;
                feeGrowthInside1X128 = upperFeeGrowthOutside1X128 - lowerFeeGrowthOutside1X128;
            } else {
                feeGrowthInside0X128 = feeGrowthGlobal0X128 - lowerFeeGrowthOutside0X128 - upperFeeGrowthOutside0X128;
                feeGrowthInside1X128 = feeGrowthGlobal1X128 - lowerFeeGrowthOutside1X128 - upperFeeGrowthOutside1X128;
            }
        }
    }

    function _getPoolStateSlot(PoolId poolId) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(PoolId.unwrap(poolId), POOLS_SLOT));
    }

    function _getTickInfoSlot(PoolId poolId, int24 tick) internal pure returns (bytes32) {
        // slot key of Pool.State value: `pools[poolId]`
        bytes32 stateSlot = _getPoolStateSlot(poolId);

        // Pool.State: `mapping(int24 => TickInfo) ticks`
        bytes32 ticksMappingSlot = bytes32(uint256(stateSlot) + TICKS_OFFSET);

        // slot key of the tick key: `pools[poolId].ticks[tick]
        return keccak256(abi.encodePacked(int256(tick), ticksMappingSlot));
    }

    function _getPositionInfoSlot(PoolId poolId, bytes32 positionId) internal pure returns (bytes32) {
        // slot key of Pool.State value: `pools[poolId]`
        bytes32 stateSlot = _getPoolStateSlot(poolId);

        // Pool.State: `mapping(bytes32 => Position.State) positions;`
        bytes32 positionMapping = bytes32(uint256(stateSlot) + POSITIONS_OFFSET);

        // slot of the mapping key: `pools[poolId].positions[positionId]
        return keccak256(abi.encodePacked(positionId, positionMapping));
    }
}
"
    },
    "lib/v4-core/src/types/Currency.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20Minimal} from "../interfaces/external/IERC20Minimal.sol";
import {CustomRevert} from "../libraries/CustomRevert.sol";

type Currency is address;

using {greaterThan as >, lessThan as <, greaterThanOrEqualTo as >=, equals as ==} for Currency global;
using CurrencyLibrary for Currency global;

function equals(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) == Currency.unwrap(other);
}

function greaterThan(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) > Currency.unwrap(other);
}

function lessThan(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) < Currency.unwrap(other);
}

function greaterThanOrEqualTo(Currency currency, Currency other) pure returns (bool) {
    return Currency.unwrap(currency) >= Currency.unwrap(other);
}

/// @title CurrencyLibrary
/// @dev This library allows for transferring and holding native tokens and ERC20 tokens
library CurrencyLibrary {
    /// @notice Additional context for ERC-7751 wrapped error when a native transfer fails
    error NativeTransferFailed();

    /// @notice Additional context for ERC-7751 wrapped error when an ERC20 transfer fails
    error ERC20TransferFailed();

    /// @notice A constant to represent the native currency
    Currency public constant ADDRESS_ZERO = Currency.wrap(address(0));

    function transfer(Currency currency, address to, uint256 amount) internal {
        // altered from https://github.com/transmissions11/solmate/blob/44a9963d4c78111f77caa0e65d677b8b46d6f2e6/src/utils/SafeTransferLib.sol
        // modified custom error selectors

        bool success;
        if (currency.isAddressZero()) {
            assembly ("memory-safe") {
                // Transfer the ETH and revert if it fails.
                success := call(gas(), to, amount, 0, 0, 0, 0)
            }
            // revert with NativeTransferFailed, containing the bubbled up error as an argument
            if (!success) {
                CustomRevert.bubbleUpAndRevertWith(to, bytes4(0), NativeTransferFailed.selector);
            }
        } else {
            assembly ("memory-safe") {
                // Get a pointer to some free memory.
                let fmp := mload(0x40)

                // Write the abi-encoded calldata into memory, beginning with the function selector.
                mstore(fmp, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
                mstore(add(fmp, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
                mstore(add(fmp, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

                success :=
                    and(
                        // Set success to whether the call reverted, if not we check it either
                        // returned exactly 1 (can't just be non-zero data), or had no return data.
                        or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                        // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                        // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                        // Counterintuitively, this call must be positioned second to the or() call in the
                        // surrounding and() call or else returndatasize() will be zero during the computation.
                        call(gas(), currency, 0, fmp, 68, 0, 32)
                    )

                // Now clean the memory we used
                mstore(fmp, 0) // 4 byte `selector` and 28 bytes of `to` were stored here
                mstore(add(fmp, 0x20), 0) // 4 bytes of `to` and 28 bytes of `amount` were stored here
                mstore(add(fmp, 0x40), 0) // 4 bytes of `amount` were stored here
            }
            // revert with ERC20TransferFailed, containing the bubbled up error as an argument
            if (!success) {
                CustomRevert.bubbleUpAndRevertWith(
                    Currency.unwrap(currency), IERC20Minimal.transfer.selector, ERC20TransferFailed.selector
                );
            }
        }
    }

    function balanceOfSelf(Currency currency) internal view returns (uint256) {
        if (currency.isAddressZero()) {
            return address(this).balance;
        } else {
            return IERC20Minimal(Currency.unwrap(currency)).balanceOf(address(this));
        }
    }

    function balanceOf(Currency currency, address owner) internal view returns (uint256) {
        if (currency.isAddressZero()) {
            return owner.balance;
        } else {
            return IERC20Minimal(Currency.unwrap(currency)).balanceOf(owner);
        }
    }

    function isAddressZero(Currency currency) internal pure returns (bool) {
        return Currency.unwrap(currency) == Currency.unwrap(ADDRESS_ZERO);
    }

    function toId(Currency currency) internal pure returns (uint256) {
        return uint160(Currency.unwrap(currency));
    }

    // If the upper 12 bytes are non-zero, they will be zero-ed out
    // Therefore, fromId() and toId() are not inverses of each other
    function fromId(uint256 id) internal pure returns (Currency) {
        return Currency.wrap(address(uint160(id)));
    }
}
"
    },
    "lib/v4-core/src/types/PoolKey.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Currency} from "./Currency.sol";
import {IHooks} from "../interfaces/IHooks.sol";
import {PoolIdLibrary} from "./PoolId.sol";

using PoolIdLibrary for PoolKey global;

/// @notice Returns the key for identifying a pool
struct PoolKey {
    /// @notice The lower currency of the pool, sorted numerically
    Currency currency0;
    /// @notice The higher currency of the pool, sorted numerically
    Currency currency1;
    /// @notice The pool LP fee, capped at 1_000_000. If the highest bit is 1, the pool has a dynamic fee and must be exactly equal to 0x800000
    uint24 fee;
    /// @notice Ticks that involve positions must be a multiple of tick spacing
    int24 tickSpacing;
    /// @notice The hooks of the pool
    IHooks hooks;
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `accou