Description:
Multi-signature wallet contract requiring multiple confirmations for transaction execution.
Blockchain: Ethereum
Source Code: View Code On The Blockchain
Solidity Source Code:
{{
"language": "Solidity",
"sources": {
"@morpho-blue/interfaces/IMorpho.sol": {
"content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
type Id is bytes32;
struct MarketParams {
address loanToken;
address collateralToken;
address oracle;
address irm;
uint256 lltv;
}
/// @dev Warning: For `feeRecipient`, `supplyShares` does not contain the accrued shares since the last interest
/// accrual.
struct Position {
uint256 supplyShares;
uint128 borrowShares;
uint128 collateral;
}
/// @dev Warning: `totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalSupplyShares` does not contain the additional shares accrued by `feeRecipient` since the last
/// interest accrual.
struct Market {
uint128 totalSupplyAssets;
uint128 totalSupplyShares;
uint128 totalBorrowAssets;
uint128 totalBorrowShares;
uint128 lastUpdate;
uint128 fee;
}
struct Authorization {
address authorizer;
address authorized;
bool isAuthorized;
uint256 nonce;
uint256 deadline;
}
struct Signature {
uint8 v;
bytes32 r;
bytes32 s;
}
/// @dev This interface is used for factorizing IMorphoStaticTyping and IMorpho.
/// @dev Consider using the IMorpho interface instead of this one.
interface IMorphoBase {
/// @notice The EIP-712 domain separator.
/// @dev Warning: Every EIP-712 signed message based on this domain separator can be reused on chains sharing the
/// same chain id and on forks because the domain separator would be the same.
function DOMAIN_SEPARATOR() external view returns (bytes32);
/// @notice The owner of the contract.
/// @dev It has the power to change the owner.
/// @dev It has the power to set fees on markets and set the fee recipient.
/// @dev It has the power to enable but not disable IRMs and LLTVs.
function owner() external view returns (address);
/// @notice The fee recipient of all markets.
/// @dev The recipient receives the fees of a given market through a supply position on that market.
function feeRecipient() external view returns (address);
/// @notice Whether the `irm` is enabled.
function isIrmEnabled(address irm) external view returns (bool);
/// @notice Whether the `lltv` is enabled.
function isLltvEnabled(uint256 lltv) external view returns (bool);
/// @notice Whether `authorized` is authorized to modify `authorizer`'s position on all markets.
/// @dev Anyone is authorized to modify their own positions, regardless of this variable.
function isAuthorized(address authorizer, address authorized) external view returns (bool);
/// @notice The `authorizer`'s current nonce. Used to prevent replay attacks with EIP-712 signatures.
function nonce(address authorizer) external view returns (uint256);
/// @notice Sets `newOwner` as `owner` of the contract.
/// @dev Warning: No two-step transfer ownership.
/// @dev Warning: The owner can be set to the zero address.
function setOwner(address newOwner) external;
/// @notice Enables `irm` as a possible IRM for market creation.
/// @dev Warning: It is not possible to disable an IRM.
function enableIrm(address irm) external;
/// @notice Enables `lltv` as a possible LLTV for market creation.
/// @dev Warning: It is not possible to disable a LLTV.
function enableLltv(uint256 lltv) external;
/// @notice Sets the `newFee` for the given market `marketParams`.
/// @param newFee The new fee, scaled by WAD.
/// @dev Warning: The recipient can be the zero address.
function setFee(MarketParams memory marketParams, uint256 newFee) external;
/// @notice Sets `newFeeRecipient` as `feeRecipient` of the fee.
/// @dev Warning: If the fee recipient is set to the zero address, fees will accrue there and will be lost.
/// @dev Modifying the fee recipient will allow the new recipient to claim any pending fees not yet accrued. To
/// ensure that the current recipient receives all due fees, accrue interest manually prior to making any changes.
function setFeeRecipient(address newFeeRecipient) external;
/// @notice Creates the market `marketParams`.
/// @dev Here is the list of assumptions on the market's dependencies (tokens, IRM and oracle) that guarantees
/// Morpho behaves as expected:
/// - The token should be ERC-20 compliant, except that it can omit return values on `transfer` and `transferFrom`.
/// - The token balance of Morpho should only decrease on `transfer` and `transferFrom`. In particular, tokens with
/// burn functions are not supported.
/// - The token should not re-enter Morpho on `transfer` nor `transferFrom`.
/// - The token balance of the sender (resp. receiver) should decrease (resp. increase) by exactly the given amount
/// on `transfer` and `transferFrom`. In particular, tokens with fees on transfer are not supported.
/// - The IRM should not re-enter Morpho.
/// - The oracle should return a price with the correct scaling.
/// @dev Here is a list of assumptions on the market's dependencies which, if broken, could break Morpho's liveness
/// properties (funds could get stuck):
/// - The token should not revert on `transfer` and `transferFrom` if balances and approvals are right.
/// - The amount of assets supplied and borrowed should not go above ~1e35 (otherwise the computation of
/// `toSharesUp` and `toSharesDown` can overflow).
/// - The IRM should not revert on `borrowRate`.
/// - The IRM should not return a very high borrow rate (otherwise the computation of `interest` in
/// `_accrueInterest` can overflow).
/// - The oracle should not revert `price`.
/// - The oracle should not return a very high price (otherwise the computation of `maxBorrow` in `_isHealthy` or of
/// `assetsRepaid` in `liquidate` can overflow).
/// @dev The borrow share price of a market with less than 1e4 assets borrowed can be decreased by manipulations, to
/// the point where `totalBorrowShares` is very large and borrowing overflows.
function createMarket(MarketParams memory marketParams) external;
/// @notice Supplies `assets` or `shares` on behalf of `onBehalf`, optionally calling back the caller's
/// `onMorphoSupply` function with the given `data`.
/// @dev Either `assets` or `shares` should be zero. Most use cases should rely on `assets` as an input so the
/// caller is guaranteed to have `assets` tokens pulled from their balance, but the possibility to mint a specific
/// amount of shares is given for full compatibility and precision.
/// @dev Supplying a large amount can revert for overflow.
/// @dev Supplying an amount of shares may lead to supply more or fewer assets than expected due to slippage.
/// Consider using the `assets` parameter to avoid this.
/// @param marketParams The market to supply assets to.
/// @param assets The amount of assets to supply.
/// @param shares The amount of shares to mint.
/// @param onBehalf The address that will own the increased supply position.
/// @param data Arbitrary data to pass to the `onMorphoSupply` callback. Pass empty data if not needed.
/// @return assetsSupplied The amount of assets supplied.
/// @return sharesSupplied The amount of shares minted.
function supply(
MarketParams memory marketParams,
uint256 assets,
uint256 shares,
address onBehalf,
bytes memory data
) external returns (uint256 assetsSupplied, uint256 sharesSupplied);
/// @notice Withdraws `assets` or `shares` on behalf of `onBehalf` and sends the assets to `receiver`.
/// @dev Either `assets` or `shares` should be zero. To withdraw max, pass the `shares`'s balance of `onBehalf`.
/// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
/// @dev Withdrawing an amount corresponding to more shares than supplied will revert for underflow.
/// @dev It is advised to use the `shares` input when withdrawing the full position to avoid reverts due to
/// conversion roundings between shares and assets.
/// @param marketParams The market to withdraw assets from.
/// @param assets The amount of assets to withdraw.
/// @param shares The amount of shares to burn.
/// @param onBehalf The address of the owner of the supply position.
/// @param receiver The address that will receive the withdrawn assets.
/// @return assetsWithdrawn The amount of assets withdrawn.
/// @return sharesWithdrawn The amount of shares burned.
function withdraw(
MarketParams memory marketParams,
uint256 assets,
uint256 shares,
address onBehalf,
address receiver
) external returns (uint256 assetsWithdrawn, uint256 sharesWithdrawn);
/// @notice Borrows `assets` or `shares` on behalf of `onBehalf` and sends the assets to `receiver`.
/// @dev Either `assets` or `shares` should be zero. Most use cases should rely on `assets` as an input so the
/// caller is guaranteed to borrow `assets` of tokens, but the possibility to mint a specific amount of shares is
/// given for full compatibility and precision.
/// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
/// @dev Borrowing a large amount can revert for overflow.
/// @dev Borrowing an amount of shares may lead to borrow fewer assets than expected due to slippage.
/// Consider using the `assets` parameter to avoid this.
/// @param marketParams The market to borrow assets from.
/// @param assets The amount of assets to borrow.
/// @param shares The amount of shares to mint.
/// @param onBehalf The address that will own the increased borrow position.
/// @param receiver The address that will receive the borrowed assets.
/// @return assetsBorrowed The amount of assets borrowed.
/// @return sharesBorrowed The amount of shares minted.
function borrow(
MarketParams memory marketParams,
uint256 assets,
uint256 shares,
address onBehalf,
address receiver
) external returns (uint256 assetsBorrowed, uint256 sharesBorrowed);
/// @notice Repays `assets` or `shares` on behalf of `onBehalf`, optionally calling back the caller's
/// `onMorphoRepay` function with the given `data`.
/// @dev Either `assets` or `shares` should be zero. To repay max, pass the `shares`'s balance of `onBehalf`.
/// @dev Repaying an amount corresponding to more shares than borrowed will revert for underflow.
/// @dev It is advised to use the `shares` input when repaying the full position to avoid reverts due to conversion
/// roundings between shares and assets.
/// @dev An attacker can front-run a repay with a small repay making the transaction revert for underflow.
/// @param marketParams The market to repay assets to.
/// @param assets The amount of assets to repay.
/// @param shares The amount of shares to burn.
/// @param onBehalf The address of the owner of the debt position.
/// @param data Arbitrary data to pass to the `onMorphoRepay` callback. Pass empty data if not needed.
/// @return assetsRepaid The amount of assets repaid.
/// @return sharesRepaid The amount of shares burned.
function repay(
MarketParams memory marketParams,
uint256 assets,
uint256 shares,
address onBehalf,
bytes memory data
) external returns (uint256 assetsRepaid, uint256 sharesRepaid);
/// @notice Supplies `assets` of collateral on behalf of `onBehalf`, optionally calling back the caller's
/// `onMorphoSupplyCollateral` function with the given `data`.
/// @dev Interest are not accrued since it's not required and it saves gas.
/// @dev Supplying a large amount can revert for overflow.
/// @param marketParams The market to supply collateral to.
/// @param assets The amount of collateral to supply.
/// @param onBehalf The address that will own the increased collateral position.
/// @param data Arbitrary data to pass to the `onMorphoSupplyCollateral` callback. Pass empty data if not needed.
function supplyCollateral(MarketParams memory marketParams, uint256 assets, address onBehalf, bytes memory data)
external;
/// @notice Withdraws `assets` of collateral on behalf of `onBehalf` and sends the assets to `receiver`.
/// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
/// @dev Withdrawing an amount corresponding to more collateral than supplied will revert for underflow.
/// @param marketParams The market to withdraw collateral from.
/// @param assets The amount of collateral to withdraw.
/// @param onBehalf The address of the owner of the collateral position.
/// @param receiver The address that will receive the collateral assets.
function withdrawCollateral(MarketParams memory marketParams, uint256 assets, address onBehalf, address receiver)
external;
/// @notice Liquidates the given `repaidShares` of debt asset or seize the given `seizedAssets` of collateral on the
/// given market `marketParams` of the given `borrower`'s position, optionally calling back the caller's
/// `onMorphoLiquidate` function with the given `data`.
/// @dev Either `seizedAssets` or `repaidShares` should be zero.
/// @dev Seizing more than the collateral balance will underflow and revert without any error message.
/// @dev Repaying more than the borrow balance will underflow and revert without any error message.
/// @dev An attacker can front-run a liquidation with a small repay making the transaction revert for underflow.
/// @param marketParams The market of the position.
/// @param borrower The owner of the position.
/// @param seizedAssets The amount of collateral to seize.
/// @param repaidShares The amount of shares to repay.
/// @param data Arbitrary data to pass to the `onMorphoLiquidate` callback. Pass empty data if not needed.
/// @return The amount of assets seized.
/// @return The amount of assets repaid.
function liquidate(
MarketParams memory marketParams,
address borrower,
uint256 seizedAssets,
uint256 repaidShares,
bytes memory data
) external returns (uint256, uint256);
/// @notice Executes a flash loan.
/// @dev Flash loans have access to the whole balance of the contract (the liquidity and deposited collateral of all
/// markets combined, plus donations).
/// @dev Warning: Not ERC-3156 compliant but compatibility is easily reached:
/// - `flashFee` is zero.
/// - `maxFlashLoan` is the token's balance of this contract.
/// - The receiver of `assets` is the caller.
/// @param token The token to flash loan.
/// @param assets The amount of assets to flash loan.
/// @param data Arbitrary data to pass to the `onMorphoFlashLoan` callback.
function flashLoan(address token, uint256 assets, bytes calldata data) external;
/// @notice Sets the authorization for `authorized` to manage `msg.sender`'s positions.
/// @param authorized The authorized address.
/// @param newIsAuthorized The new authorization status.
function setAuthorization(address authorized, bool newIsAuthorized) external;
/// @notice Sets the authorization for `authorization.authorized` to manage `authorization.authorizer`'s positions.
/// @dev Warning: Reverts if the signature has already been submitted.
/// @dev The signature is malleable, but it has no impact on the security here.
/// @dev The nonce is passed as argument to be able to revert with a different error message.
/// @param authorization The `Authorization` struct.
/// @param signature The signature.
function setAuthorizationWithSig(Authorization calldata authorization, Signature calldata signature) external;
/// @notice Accrues interest for the given market `marketParams`.
function accrueInterest(MarketParams memory marketParams) external;
/// @notice Returns the data stored on the different `slots`.
function extSloads(bytes32[] memory slots) external view returns (bytes32[] memory);
}
/// @dev This interface is inherited by Morpho so that function signatures are checked by the compiler.
/// @dev Consider using the IMorpho interface instead of this one.
interface IMorphoStaticTyping is IMorphoBase {
/// @notice The state of the position of `user` on the market corresponding to `id`.
/// @dev Warning: For `feeRecipient`, `supplyShares` does not contain the accrued shares since the last interest
/// accrual.
function position(Id id, address user)
external
view
returns (uint256 supplyShares, uint128 borrowShares, uint128 collateral);
/// @notice The state of the market corresponding to `id`.
/// @dev Warning: `totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalSupplyShares` does not contain the accrued shares by `feeRecipient` since the last interest
/// accrual.
function market(Id id)
external
view
returns (
uint128 totalSupplyAssets,
uint128 totalSupplyShares,
uint128 totalBorrowAssets,
uint128 totalBorrowShares,
uint128 lastUpdate,
uint128 fee
);
/// @notice The market params corresponding to `id`.
/// @dev This mapping is not used in Morpho. It is there to enable reducing the cost associated to calldata on layer
/// 2s by creating a wrapper contract with functions that take `id` as input instead of `marketParams`.
function idToMarketParams(Id id)
external
view
returns (address loanToken, address collateralToken, address oracle, address irm, uint256 lltv);
}
/// @title IMorpho
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @dev Use this interface for Morpho to have access to all the functions with the appropriate function signatures.
interface IMorpho is IMorphoBase {
/// @notice The state of the position of `user` on the market corresponding to `id`.
/// @dev Warning: For `feeRecipient`, `p.supplyShares` does not contain the accrued shares since the last interest
/// accrual.
function position(Id id, address user) external view returns (Position memory p);
/// @notice The state of the market corresponding to `id`.
/// @dev Warning: `m.totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `m.totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `m.totalSupplyShares` does not contain the accrued shares by `feeRecipient` since the last
/// interest accrual.
function market(Id id) external view returns (Market memory m);
/// @notice The market params corresponding to `id`.
/// @dev This mapping is not used in Morpho. It is there to enable reducing the cost associated to calldata on layer
/// 2s by creating a wrapper contract with functions that take `id` as input instead of `marketParams`.
function idToMarketParams(Id id) external view returns (MarketParams memory);
}
"
},
"@morpho-blue/interfaces/IMorphoCallbacks.sol": {
"content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title IMorphoLiquidateCallback
/// @notice Interface that liquidators willing to use `liquidate`'s callback must implement.
interface IMorphoLiquidateCallback {
/// @notice Callback called when a liquidation occurs.
/// @dev The callback is called only if data is not empty.
/// @param repaidAssets The amount of repaid assets.
/// @param data Arbitrary data passed to the `liquidate` function.
function onMorphoLiquidate(uint256 repaidAssets, bytes calldata data) external;
}
/// @title IMorphoRepayCallback
/// @notice Interface that users willing to use `repay`'s callback must implement.
interface IMorphoRepayCallback {
/// @notice Callback called when a repayment occurs.
/// @dev The callback is called only if data is not empty.
/// @param assets The amount of repaid assets.
/// @param data Arbitrary data passed to the `repay` function.
function onMorphoRepay(uint256 assets, bytes calldata data) external;
}
/// @title IMorphoSupplyCallback
/// @notice Interface that users willing to use `supply`'s callback must implement.
interface IMorphoSupplyCallback {
/// @notice Callback called when a supply occurs.
/// @dev The callback is called only if data is not empty.
/// @param assets The amount of supplied assets.
/// @param data Arbitrary data passed to the `supply` function.
function onMorphoSupply(uint256 assets, bytes calldata data) external;
}
/// @title IMorphoSupplyCollateralCallback
/// @notice Interface that users willing to use `supplyCollateral`'s callback must implement.
interface IMorphoSupplyCollateralCallback {
/// @notice Callback called when a supply of collateral occurs.
/// @dev The callback is called only if data is not empty.
/// @param assets The amount of supplied collateral.
/// @param data Arbitrary data passed to the `supplyCollateral` function.
function onMorphoSupplyCollateral(uint256 assets, bytes calldata data) external;
}
/// @title IMorphoFlashLoanCallback
/// @notice Interface that users willing to use `flashLoan`'s callback must implement.
interface IMorphoFlashLoanCallback {
/// @notice Callback called when a flash loan occurs.
/// @dev The callback is called only if data is not empty.
/// @param assets The amount of assets that was flash loaned.
/// @param data Arbitrary data passed to the `flashLoan` function.
function onMorphoFlashLoan(uint256 assets, bytes calldata data) external;
}
"
},
"@morpho-blue/libraries/MarketParamsLib.sol": {
"content": "// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;
import {Id, MarketParams} from "../interfaces/IMorpho.sol";
/// @title MarketParamsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library to convert a market to its id.
library MarketParamsLib {
/// @notice The length of the data used to compute the id of a market.
/// @dev The length is 5 * 32 because `MarketParams` has 5 variables of 32 bytes each.
uint256 internal constant MARKET_PARAMS_BYTES_LENGTH = 5 * 32;
/// @notice Returns the id of the market `marketParams`.
function id(MarketParams memory marketParams) internal pure returns (Id marketParamsId) {
assembly ("memory-safe") {
marketParamsId := keccak256(marketParams, MARKET_PARAMS_BYTES_LENGTH)
}
}
}
"
},
"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.20;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```solidity
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
*
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Storage of the initializable contract.
*
* It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
* when using with upgradeable contracts.
*
* @custom:storage-location erc7201:openzeppelin.storage.Initializable
*/
struct InitializableStorage {
/**
* @dev Indicates that the contract has been initialized.
*/
uint64 _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool _initializing;
}
// keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;
/**
* @dev The contract is already initialized.
*/
error InvalidInitialization();
/**
* @dev The contract is not initializing.
*/
error NotInitializing();
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint64 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
* number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
* production.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
// solhint-disable-next-line var-name-mixedcase
InitializableStorage storage $ = _getInitializableStorage();
// Cache values to avoid duplicated sloads
bool isTopLevelCall = !$._initializing;
uint64 initialized = $._initialized;
// Allowed calls:
// - initialSetup: the contract is not in the initializing state and no previous version was
// initialized
// - construction: the contract is initialized at version 1 (no reinitialization) and the
// current contract is just being deployed
bool initialSetup = initialized == 0 && isTopLevelCall;
bool construction = initialized == 1 && address(this).code.length == 0;
if (!initialSetup && !construction) {
revert InvalidInitialization();
}
$._initialized = 1;
if (isTopLevelCall) {
$._initializing = true;
}
_;
if (isTopLevelCall) {
$._initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint64 version) {
// solhint-disable-next-line var-name-mixedcase
InitializableStorage storage $ = _getInitializableStorage();
if ($._initializing || $._initialized >= version) {
revert InvalidInitialization();
}
$._initialized = version;
$._initializing = true;
_;
$._initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
_checkInitializing();
_;
}
/**
* @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
*/
function _checkInitializing() internal view virtual {
if (!_isInitializing()) {
revert NotInitializing();
}
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
// solhint-disable-next-line var-name-mixedcase
InitializableStorage storage $ = _getInitializableStorage();
if ($._initializing) {
revert InvalidInitialization();
}
if ($._initialized != type(uint64).max) {
$._initialized = type(uint64).max;
emit Initialized(type(uint64).max);
}
}
/**
* @dev Returns the highest version that has been initialized. See {reinitializer}.
*/
function _getInitializedVersion() internal view returns (uint64) {
return _getInitializableStorage()._initialized;
}
/**
* @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
*/
function _isInitializing() internal view returns (bool) {
return _getInitializableStorage()._initializing;
}
/**
* @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.
*
* NOTE: Consider following the ERC-7201 formula to derive storage locations.
*/
function _initializableStorageSlot() internal pure virtual returns (bytes32) {
return INITIALIZABLE_STORAGE;
}
/**
* @dev Returns a pointer to the storage namespace.
*/
// solhint-disable-next-line var-name-mixedcase
function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
bytes32 slot = _initializableStorageSlot();
assembly {
$.slot := slot
}
}
}
"
},
"@openzeppelin/contracts-upgradeable/utils/cryptography/EIP712Upgradeable.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/cryptography/EIP712.sol)
pragma solidity ^0.8.20;
import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import {IERC5267} from "@openzeppelin/contracts/interfaces/IERC5267.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.
*
* The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
* encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
* does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
* produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* NOTE: The upgradeable version of this contract does not use an immutable cache and recomputes the domain separator
* each time {_domainSeparatorV4} is called. That is cheaper than accessing a cached version in cold storage.
*/
abstract contract EIP712Upgradeable is Initializable, IERC5267 {
bytes32 private constant TYPE_HASH =
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
/// @custom:storage-location erc7201:openzeppelin.storage.EIP712
struct EIP712Storage {
/// @custom:oz-renamed-from _HASHED_NAME
bytes32 _hashedName;
/// @custom:oz-renamed-from _HASHED_VERSION
bytes32 _hashedVersion;
string _name;
string _version;
}
// keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;
function _getEIP712Storage() private pure returns (EIP712Storage storage $) {
assembly {
$.slot := EIP712StorageLocation
}
}
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
function __EIP712_init(string memory name, string memory version) internal onlyInitializing {
__EIP712_init_unchained(name, version);
}
function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {
EIP712Storage storage $ = _getEIP712Storage();
$._name = name;
$._version = version;
// Reset prior values in storage if upgrading
$._hashedName = 0;
$._hashedVersion = 0;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
return _buildDomainSeparator();
}
function _buildDomainSeparator() private view returns (bytes32) {
return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
}
/// @inheritdoc IERC5267
function eip712Domain()
public
view
virtual
returns (
bytes1 fields,
string memory name,
string memory version,
uint256 chainId,
address verifyingContract,
bytes32 salt,
uint256[] memory extensions
)
{
EIP712Storage storage $ = _getEIP712Storage();
// If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized
// and the EIP712 domain is not reliable, as it will be missing name and version.
require($._hashedName == 0 && $._hashedVersion == 0, "EIP712: Uninitialized");
return (
hex"0f", // 01111
_EIP712Name(),
_EIP712Version(),
block.chainid,
address(this),
bytes32(0),
new uint256[](0)
);
}
/**
* @dev The name parameter for the EIP712 domain.
*
* NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
* are a concern.
*/
function _EIP712Name() internal view virtual returns (string memory) {
EIP712Storage storage $ = _getEIP712Storage();
return $._name;
}
/**
* @dev The version parameter for the EIP712 domain.
*
* NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
* are a concern.
*/
function _EIP712Version() internal view virtual returns (string memory) {
EIP712Storage storage $ = _getEIP712Storage();
return $._version;
}
/**
* @dev The hash of the name parameter for the EIP712 domain.
*
* NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.
*/
function _EIP712NameHash() internal view returns (bytes32) {
EIP712Storage storage $ = _getEIP712Storage();
string memory name = _EIP712Name();
if (bytes(name).length > 0) {
return keccak256(bytes(name));
} else {
// If the name is empty, the contract may have been upgraded without initializing the new storage.
// We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.
bytes32 hashedName = $._hashedName;
if (hashedName != 0) {
return hashedName;
} else {
return keccak256("");
}
}
}
/**
* @dev The hash of the version parameter for the EIP712 domain.
*
* NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.
*/
function _EIP712VersionHash() internal view returns (bytes32) {
EIP712Storage storage $ = _getEIP712Storage();
string memory version = _EIP712Version();
if (bytes(version).length > 0) {
return keccak256(bytes(version));
} else {
// If the version is empty, the contract may have been upgraded without initializing the new storage.
// We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.
bytes32 hashedVersion = $._hashedVersion;
if (hashedVersion != 0) {
return hashedVersion;
} else {
return keccak256("");
}
}
}
}
"
},
"@openzeppelin/contracts/interfaces/IERC1363.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC1363.sol)
pragma solidity ^0.8.20;
import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";
/**
* @title IERC1363
* @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
*
* Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
* after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
*/
interface IERC1363 is IERC20, IERC165 {
/*
* Note: the ERC-165 identifier for this interface is 0xb0202a11.
* 0xb0202a11 ===
* bytes4(keccak256('transferAndCall(address,uint256)')) ^
* bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
* bytes4(keccak256('approveAndCall(address,uint256)')) ^
* bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
*/
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferAndCall(address to, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @param data Additional data with no specified format, sent in call to `to`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param from The address which you want to send tokens from.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferFromAndCall(address from, address to, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param from The address which you want to send tokens from.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @param data Additional data with no specified format, sent in call to `to`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function approveAndCall(address spender, uint256 value) external returns (bool);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
* @param data Additional data with no specified format, sent in call to `spender`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}
"
},
"@openzeppelin/contracts/interfaces/IERC165.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)
pragma solidity ^0.8.20;
import {IERC165} from "../utils/introspection/IERC165.sol";
"
},
"@openzeppelin/contracts/interfaces/IERC20.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../token/ERC20/IERC20.sol";
"
},
"@openzeppelin/contracts/interfaces/IERC5267.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)
pragma solidity ^0.8.20;
interface IERC5267 {
/**
* @dev MAY be emitted to signal that the domain could have changed.
*/
event EIP712DomainChanged();
/**
* @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
* signature.
*/
function eip712Domain()
external
view
returns (
bytes1 fields,
string memory name,
string memory version,
uint256 chainId,
address verifyingContract,
bytes32 salt,
uint256[] memory extensions
);
}
"
},
"@openzeppelin/contracts/token/ERC20/IERC20.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-20 standard as defined in the ERC.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
},
"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC-20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
/**
* @dev An operation with an ERC-20 token failed.
*/
error SafeERC20FailedOperation(address token);
/**
* @dev Indicates a failed `decreaseAllowance` request.
*/
error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
}
/**
* @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
*/
function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
*/
function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*
* IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
* smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
* this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
* that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
forceApprove(token, spender, oldAllowance + value);
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
* value, non-reverting calls are assumed to be successful.
*
* IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
* smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
* this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
* that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
unchecked {
uint256 currentAllowance = token.allowance(address(this), spender);
if (currentAllowance < requestedDecrease) {
revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
}
forceApprove(token, spender, currentAllowance - requestedDecrease);
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*
* NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
* only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
* set here.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
* code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* Reverts if the returned value is other than `true`.
*/
function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
if (to.code.length == 0) {
safeTransfer(token, to, value);
} else if (!token.transferAndCall(to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
* has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* Reverts if the returned value is other than `true`.
*/
function transferFromAndCallRelaxed(
IERC1363 token,
address from,
address to,
uint256 value,
bytes memory data
) internal {
if (to.code.length == 0) {
safeTransferFrom(token, from, to, value);
} else if (!token.transferFromAndCall(from, to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
* code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
* Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
* once without retrying, and relies on the returned value to be true.
*
* Reverts if the returned value is other than `true`.
*/
function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
if (to.code.length == 0) {
forceApprove(token, to, value);
} else if (!token.approveAndCall(to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
uint256 returnSize;
uint256 returnValue;
assembly ("memory-safe") {
let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
// bubble errors
if iszero(success) {
let ptr := mload(0x40)
returndatacopy(ptr, 0, returndatasize())
revert(ptr, returndatasize())
}
returnSize := returndatasize()
returnValue := mload(0)
}
if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
bool success;
uint256 returnSize;
uint256 returnValue;
assembly ("memory-safe") {
success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
returnSize := returndatasize()
returnValue := mload(0)
}
return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
}
}
"
},
"@openzeppelin/contracts/utils/cryptography/ECDSA.sol": {
"content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.20;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS
}
/**
* @dev The signature derives the `address(0)`.
*/
error ECDSAInvalidSignature();
/**
* @dev The signature has an invalid length.
*/
error ECDSAInvalidSignatureLength(uint256 length);
/**
* @dev The signature has an S value that is in the upper half order.
*/
error ECDSAInvalidSignatureS(bytes32 s);
/**
* @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
* return address(0) without also returning an error description. Errors are documented using an enum (error type)
* and a bytes32 providing additional information about the error.
*
* If no error is returned, then the address can be used for verification purposes.
*
* The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*/
function tryRecover(
bytes32 hash,
bytes memory signature
) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly ("memory-safe") {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else {
return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signatuSubmitted on: 2025-09-26 18:54:44
Comments
Log in to comment.
No comments yet.