ShleepyOFT

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

/**
 *Submitted for verification at polygonscan.com on 2025-09-24
*/

/**
 *Submitted for verification at Etherscan.io on 2025-09-24
*/

/**
 *Submitted for verification at polygonscan.com on 2025-09-08
*/

// Sources flattened with hardhat v2.26.3 https://hardhat.org


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessageLibManager.sol@v3.0.128

struct SetConfigParam {
    uint32 eid;
    uint32 configType;
    bytes config;
}

interface IMessageLibManager {
    struct Timeout {
        address lib;
        uint256 expiry;
    }

    event LibraryRegistered(address newLib);
    event DefaultSendLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
    event SendLibrarySet(address sender, uint32 eid, address newLib);
    event ReceiveLibrarySet(address receiver, uint32 eid, address newLib);
    event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);

    function registerLibrary(address _lib) external;

    function isRegisteredLibrary(address _lib) external view returns (bool);

    function getRegisteredLibraries() external view returns (address[] memory);

    function setDefaultSendLibrary(uint32 _eid, address _newLib) external;

    function defaultSendLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function defaultReceiveLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;

    function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);

    function isSupportedEid(uint32 _eid) external view returns (bool);

    function isValidReceiveLibrary(address _receiver, uint32 _eid, address _lib) external view returns (bool);

    /// ------------------- OApp interfaces -------------------
    function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;

    function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);

    function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);

    function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);

    function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _expiry) external;

    function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);

    function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;

    function getConfig(
        address _oapp,
        address _lib,
        uint32 _eid,
        uint32 _configType
    ) external view returns (bytes memory config);
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessagingChannel.sol@v3.0.128

interface IMessagingChannel {
    event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
    event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
    event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);

    function eid() external view returns (uint32);

    // this is an emergency function if a message cannot be verified for some reasons
    // required to provide _nextNonce to avoid race condition
    function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;

    function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);

    function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);

    function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);

    function inboundPayloadHash(
        address _receiver,
        uint32 _srcEid,
        bytes32 _sender,
        uint64 _nonce
    ) external view returns (bytes32);

    function lazyInboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessagingComposer.sol@v3.0.128

interface IMessagingComposer {
    event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
    event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
    event LzComposeAlert(
        address indexed from,
        address indexed to,
        address indexed executor,
        bytes32 guid,
        uint16 index,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    function composeQueue(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index
    ) external view returns (bytes32 messageHash);

    function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;

    function lzCompose(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessagingContext.sol@v3.0.128

interface IMessagingContext {
    function isSendingMessage() external view returns (bool);

    function getSendContext() external view returns (uint32 dstEid, address sender);
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol@v3.0.128

struct MessagingParams {
    uint32 dstEid;
    bytes32 receiver;
    bytes message;
    bytes options;
    bool payInLzToken;
}

struct MessagingReceipt {
    bytes32 guid;
    uint64 nonce;
    MessagingFee fee;
}

struct MessagingFee {
    uint256 nativeFee;
    uint256 lzTokenFee;
}

struct Origin {
    uint32 srcEid;
    bytes32 sender;
    uint64 nonce;
}

interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
    event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);

    event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);

    event PacketDelivered(Origin origin, address receiver);

    event LzReceiveAlert(
        address indexed receiver,
        address indexed executor,
        Origin origin,
        bytes32 guid,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    event LzTokenSet(address token);

    event DelegateSet(address sender, address delegate);

    function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);

    function send(
        MessagingParams calldata _params,
        address _refundAddress
    ) external payable returns (MessagingReceipt memory);

    function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;

    function verifiable(Origin calldata _origin, address _receiver) external view returns (bool);

    function initializable(Origin calldata _origin, address _receiver) external view returns (bool);

    function lzReceive(
        Origin calldata _origin,
        address _receiver,
        bytes32 _guid,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;

    // oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
    function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;

    function setLzToken(address _lzToken) external;

    function lzToken() external view returns (address);

    function nativeToken() external view returns (address);

    function setDelegate(address _delegate) external;
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroReceiver.sol@v3.0.128

interface ILayerZeroReceiver {
    function allowInitializePath(Origin calldata _origin) external view returns (bool);

    function nextNonce(uint32 _eid, bytes32 _sender) external view returns (uint64);

    function lzReceive(
        Origin calldata _origin,
        bytes32 _guid,
        bytes calldata _message,
        address _executor,
        bytes calldata _extraData
    ) external payable;
}


// File @openzeppelin/contracts/utils/introspection/IERC165.sol@v4.9.6

// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/IMessageLib.sol@v3.0.128

enum MessageLibType {
    Send,
    Receive,
    SendAndReceive
}

interface IMessageLib is IERC165 {
    function setConfig(address _oapp, SetConfigParam[] calldata _config) external;

    function getConfig(uint32 _eid, address _oapp, uint32 _configType) external view returns (bytes memory config);

    function isSupportedEid(uint32 _eid) external view returns (bool);

    // message libs of same major version are compatible
    function version() external view returns (uint64 major, uint8 minor, uint8 endpointVersion);

    function messageLibType() external view returns (MessageLibType);
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ISendLib.sol@v3.0.128

struct Packet {
    uint64 nonce;
    uint32 srcEid;
    address sender;
    uint32 dstEid;
    bytes32 receiver;
    bytes32 guid;
    bytes message;
}

interface ISendLib is IMessageLib {
    function send(
        Packet calldata _packet,
        bytes calldata _options,
        bool _payInLzToken
    ) external returns (MessagingFee memory, bytes memory encodedPacket);

    function quote(
        Packet calldata _packet,
        bytes calldata _options,
        bool _payInLzToken
    ) external view returns (MessagingFee memory);

    function setTreasury(address _treasury) external;

    function withdrawFee(address _to, uint256 _amount) external;

    function withdrawLzTokenFee(address _lzToken, address _to, uint256 _amount) external;
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/libs/AddressCast.sol@v3.0.128

library AddressCast {
    error AddressCast_InvalidSizeForAddress();
    error AddressCast_InvalidAddress();

    function toBytes32(bytes calldata _addressBytes) internal pure returns (bytes32 result) {
        if (_addressBytes.length > 32) revert AddressCast_InvalidAddress();
        result = bytes32(_addressBytes);
        unchecked {
            uint256 offset = 32 - _addressBytes.length;
            result = result >> (offset * 8);
        }
    }

    function toBytes32(address _address) internal pure returns (bytes32 result) {
        result = bytes32(uint256(uint160(_address)));
    }

    function toBytes(bytes32 _addressBytes32, uint256 _size) internal pure returns (bytes memory result) {
        if (_size == 0 || _size > 32) revert AddressCast_InvalidSizeForAddress();
        result = new bytes(_size);
        unchecked {
            uint256 offset = 256 - _size * 8;
            assembly {
                mstore(add(result, 32), shl(offset, _addressBytes32))
            }
        }
    }

    function toAddress(bytes32 _addressBytes32) internal pure returns (address result) {
        result = address(uint160(uint256(_addressBytes32)));
    }

    function toAddress(bytes calldata _addressBytes) internal pure returns (address result) {
        if (_addressBytes.length != 20) revert AddressCast_InvalidAddress();
        result = address(bytes20(_addressBytes));
    }
}


// File @layerzerolabs/lz-evm-protocol-v2/contracts/messagelib/libs/PacketV1Codec.sol@v3.0.128

library PacketV1Codec {
    using AddressCast for address;
    using AddressCast for bytes32;

    uint8 internal constant PACKET_VERSION = 1;

    // header (version + nonce + path)
    // version
    uint256 private constant PACKET_VERSION_OFFSET = 0;
    //    nonce
    uint256 private constant NONCE_OFFSET = 1;
    //    path
    uint256 private constant SRC_EID_OFFSET = 9;
    uint256 private constant SENDER_OFFSET = 13;
    uint256 private constant DST_EID_OFFSET = 45;
    uint256 private constant RECEIVER_OFFSET = 49;
    // payload (guid + message)
    uint256 private constant GUID_OFFSET = 81; // keccak256(nonce + path)
    uint256 private constant MESSAGE_OFFSET = 113;

    function encode(Packet memory _packet) internal pure returns (bytes memory encodedPacket) {
        encodedPacket = abi.encodePacked(
            PACKET_VERSION,
            _packet.nonce,
            _packet.srcEid,
            _packet.sender.toBytes32(),
            _packet.dstEid,
            _packet.receiver,
            _packet.guid,
            _packet.message
        );
    }

    function encodePacketHeader(Packet memory _packet) internal pure returns (bytes memory) {
        return
            abi.encodePacked(
                PACKET_VERSION,
                _packet.nonce,
                _packet.srcEid,
                _packet.sender.toBytes32(),
                _packet.dstEid,
                _packet.receiver
            );
    }

    function encodePayload(Packet memory _packet) internal pure returns (bytes memory) {
        return abi.encodePacked(_packet.guid, _packet.message);
    }

    function header(bytes calldata _packet) internal pure returns (bytes calldata) {
        return _packet[0:GUID_OFFSET];
    }

    function version(bytes calldata _packet) internal pure returns (uint8) {
        return uint8(bytes1(_packet[PACKET_VERSION_OFFSET:NONCE_OFFSET]));
    }

    function nonce(bytes calldata _packet) internal pure returns (uint64) {
        return uint64(bytes8(_packet[NONCE_OFFSET:SRC_EID_OFFSET]));
    }

    function srcEid(bytes calldata _packet) internal pure returns (uint32) {
        return uint32(bytes4(_packet[SRC_EID_OFFSET:SENDER_OFFSET]));
    }

    function sender(bytes calldata _packet) internal pure returns (bytes32) {
        return bytes32(_packet[SENDER_OFFSET:DST_EID_OFFSET]);
    }

    function senderAddressB20(bytes calldata _packet) internal pure returns (address) {
        return sender(_packet).toAddress();
    }

    function dstEid(bytes calldata _packet) internal pure returns (uint32) {
        return uint32(bytes4(_packet[DST_EID_OFFSET:RECEIVER_OFFSET]));
    }

    function receiver(bytes calldata _packet) internal pure returns (bytes32) {
        return bytes32(_packet[RECEIVER_OFFSET:GUID_OFFSET]);
    }

    function receiverB20(bytes calldata _packet) internal pure returns (address) {
        return receiver(_packet).toAddress();
    }

    function guid(bytes calldata _packet) internal pure returns (bytes32) {
        return bytes32(_packet[GUID_OFFSET:MESSAGE_OFFSET]);
    }

    function message(bytes calldata _packet) internal pure returns (bytes calldata) {
        return bytes(_packet[MESSAGE_OFFSET:]);
    }

    function payload(bytes calldata _packet) internal pure returns (bytes calldata) {
        return bytes(_packet[GUID_OFFSET:]);
    }

    function payloadHash(bytes calldata _packet) internal pure returns (bytes32) {
        return keccak256(payload(_packet));
    }
}


// File @layerzerolabs/oapp-evm/contracts/oapp/interfaces/IOAppCore.sol@v0.3.2

/**
 * @title IOAppCore
 */
interface IOAppCore {
    // Custom error messages
    error OnlyPeer(uint32 eid, bytes32 sender);
    error NoPeer(uint32 eid);
    error InvalidEndpointCall();
    error InvalidDelegate();

    // Event emitted when a peer (OApp) is set for a corresponding endpoint
    event PeerSet(uint32 eid, bytes32 peer);

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     */
    function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);

    /**
     * @notice Retrieves the LayerZero endpoint associated with the OApp.
     * @return iEndpoint The LayerZero endpoint as an interface.
     */
    function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);

    /**
     * @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @return peer The peer address (OApp instance) associated with the corresponding endpoint.
     */
    function peers(uint32 _eid) external view returns (bytes32 peer);

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     */
    function setPeer(uint32 _eid, bytes32 _peer) external;

    /**
     * @notice Sets the delegate address for the OApp Core.
     * @param _delegate The address of the delegate to be set.
     */
    function setDelegate(address _delegate) external;
}


// File @layerzerolabs/oapp-evm/contracts/oapp/interfaces/IOAppReceiver.sol@v0.3.2

interface IOAppReceiver is ILayerZeroReceiver {
    /**
     * @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
     * @param _origin The origin information containing the source endpoint and sender address.
     *  - srcEid: The source chain endpoint ID.
     *  - sender: The sender address on the src chain.
     *  - nonce: The nonce of the message.
     * @param _message The lzReceive payload.
     * @param _sender The sender address.
     * @return isSender Is a valid sender.
     *
     * @dev Applications can optionally choose to implement a separate composeMsg sender that is NOT the bridging layer.
     * @dev The default sender IS the OAppReceiver implementer.
     */
    function isComposeMsgSender(
        Origin calldata _origin,
        bytes calldata _message,
        address _sender
    ) external view returns (bool isSender);
}


// File @layerzerolabs/oapp-evm/contracts/oapp/interfaces/IOAppOptionsType3.sol@v0.3.2

/**
 * @dev Struct representing enforced option parameters.
 */
struct EnforcedOptionParam {
    uint32 eid; // Endpoint ID
    uint16 msgType; // Message Type
    bytes options; // Additional options
}

/**
 * @title IOAppOptionsType3
 * @dev Interface for the OApp with Type 3 Options, allowing the setting and combining of enforced options.
 */
interface IOAppOptionsType3 {
    // Custom error message for invalid options
    error InvalidOptions(bytes options);

    // Event emitted when enforced options are set
    event EnforcedOptionSet(EnforcedOptionParam[] _enforcedOptions);

    /**
     * @notice Sets enforced options for specific endpoint and message type combinations.
     * @param _enforcedOptions An array of EnforcedOptionParam structures specifying enforced options.
     */
    function setEnforcedOptions(EnforcedOptionParam[] calldata _enforcedOptions) external;

    /**
     * @notice Combines options for a given endpoint and message type.
     * @param _eid The endpoint ID.
     * @param _msgType The OApp message type.
     * @param _extraOptions Additional options passed by the caller.
     * @return options The combination of caller specified options AND enforced options.
     */
    function combineOptions(
        uint32 _eid,
        uint16 _msgType,
        bytes calldata _extraOptions
    ) external view returns (bytes memory options);
}


// File @openzeppelin/contracts/utils/Context.sol@v4.9.6

// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.9.6

// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @layerzerolabs/oapp-evm/contracts/oapp/libs/OAppOptionsType3.sol@v0.3.2

/**
 * @title OAppOptionsType3
 * @dev Abstract contract implementing the IOAppOptionsType3 interface with type 3 options.
 */
abstract contract OAppOptionsType3 is IOAppOptionsType3, Ownable {
    uint16 internal constant OPTION_TYPE_3 = 3;

    // @dev The "msgType" should be defined in the child contract.
    mapping(uint32 eid => mapping(uint16 msgType => bytes enforcedOption)) public enforcedOptions;

    /**
     * @dev Sets the enforced options for specific endpoint and message type combinations.
     * @param _enforcedOptions An array of EnforcedOptionParam structures specifying enforced options.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Provides a way for the OApp to enforce things like paying for PreCrime, AND/OR minimum dst lzReceive gas amounts etc.
     * @dev These enforced options can vary as the potential options/execution on the remote may differ as per the msgType.
     * eg. Amount of lzReceive() gas necessary to deliver a lzCompose() message adds overhead you dont want to pay
     * if you are only making a standard LayerZero message ie. lzReceive() WITHOUT sendCompose().
     */
    function setEnforcedOptions(EnforcedOptionParam[] calldata _enforcedOptions) public virtual onlyOwner {
        _setEnforcedOptions(_enforcedOptions);
    }

    /**
     * @dev Sets the enforced options for specific endpoint and message type combinations.
     * @param _enforcedOptions An array of EnforcedOptionParam structures specifying enforced options.
     *
     * @dev Provides a way for the OApp to enforce things like paying for PreCrime, AND/OR minimum dst lzReceive gas amounts etc.
     * @dev These enforced options can vary as the potential options/execution on the remote may differ as per the msgType.
     * eg. Amount of lzReceive() gas necessary to deliver a lzCompose() message adds overhead you dont want to pay
     * if you are only making a standard LayerZero message ie. lzReceive() WITHOUT sendCompose().
     */
    function _setEnforcedOptions(EnforcedOptionParam[] memory _enforcedOptions) internal virtual {
        for (uint256 i = 0; i < _enforcedOptions.length; i++) {
            // @dev Enforced options are only available for optionType 3, as type 1 and 2 dont support combining.
            _assertOptionsType3(_enforcedOptions[i].options);
            enforcedOptions[_enforcedOptions[i].eid][_enforcedOptions[i].msgType] = _enforcedOptions[i].options;
        }

        emit EnforcedOptionSet(_enforcedOptions);
    }

    /**
     * @notice Combines options for a given endpoint and message type.
     * @param _eid The endpoint ID.
     * @param _msgType The OAPP message type.
     * @param _extraOptions Additional options passed by the caller.
     * @return options The combination of caller specified options AND enforced options.
     *
     * @dev If there is an enforced lzReceive option:
     * - {gasLimit: 200k, msg.value: 1 ether} AND a caller supplies a lzReceive option: {gasLimit: 100k, msg.value: 0.5 ether}
     * - The resulting options will be {gasLimit: 300k, msg.value: 1.5 ether} when the message is executed on the remote lzReceive() function.
     * @dev This presence of duplicated options is handled off-chain in the verifier/executor.
     */
    function combineOptions(
        uint32 _eid,
        uint16 _msgType,
        bytes calldata _extraOptions
    ) public view virtual returns (bytes memory) {
        bytes memory enforced = enforcedOptions[_eid][_msgType];

        // No enforced options, pass whatever the caller supplied, even if it's empty or legacy type 1/2 options.
        if (enforced.length == 0) return _extraOptions;

        // No caller options, return enforced
        if (_extraOptions.length == 0) return enforced;

        // @dev If caller provided _extraOptions, must be type 3 as its the ONLY type that can be combined.
        if (_extraOptions.length >= 2) {
            _assertOptionsType3(_extraOptions);
            // @dev Remove the first 2 bytes containing the type from the _extraOptions and combine with enforced.
            return bytes.concat(enforced, _extraOptions[2:]);
        }

        // No valid set of options was found.
        revert InvalidOptions(_extraOptions);
    }

    /**
     * @dev Internal function to assert that options are of type 3.
     * @param _options The options to be checked.
     */
    function _assertOptionsType3(bytes memory _options) internal pure virtual {
        uint16 optionsType;
        assembly {
            optionsType := mload(add(_options, 2))
        }
        if (optionsType != OPTION_TYPE_3) revert InvalidOptions(_options);
    }
}


// File @layerzerolabs/oapp-evm/contracts/oapp/OAppCore.sol@v0.3.2

/**
 * @title OAppCore
 * @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
 */
abstract contract OAppCore is IOAppCore, Ownable {
    // The LayerZero endpoint associated with the given OApp
    ILayerZeroEndpointV2 public immutable endpoint;

    // Mapping to store peers associated with corresponding endpoints
    mapping(uint32 eid => bytes32 peer) public peers;

    /**
     * @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
     * @param _endpoint The address of the LOCAL Layer Zero endpoint.
     * @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
     *
     * @dev The delegate typically should be set as the owner of the contract.
     */
    constructor(address _endpoint, address _delegate) {
        endpoint = ILayerZeroEndpointV2(_endpoint);

        if (_delegate == address(0)) revert InvalidDelegate();
        endpoint.setDelegate(_delegate);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
        _setPeer(_eid, _peer);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
        peers[_eid] = _peer;
        emit PeerSet(_eid, _peer);
    }

    /**
     * @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
     * ie. the peer is set to bytes32(0).
     * @param _eid The endpoint ID.
     * @return peer The address of the peer associated with the specified endpoint.
     */
    function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
        bytes32 peer = peers[_eid];
        if (peer == bytes32(0)) revert NoPeer(_eid);
        return peer;
    }

    /**
     * @notice Sets the delegate address for the OApp.
     * @param _delegate The address of the delegate to be set.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
     */
    function setDelegate(address _delegate) public onlyOwner {
        endpoint.setDelegate(_delegate);
    }
}


// File @layerzerolabs/oapp-evm/contracts/oapp/OAppReceiver.sol@v0.3.2

/**
 * @title OAppReceiver
 * @dev Abstract contract implementing the ILayerZeroReceiver interface and extending OAppCore for OApp receivers.
 */
abstract contract OAppReceiver is IOAppReceiver, OAppCore {
    // Custom error message for when the caller is not the registered endpoint/
    error OnlyEndpoint(address addr);

    // @dev The version of the OAppReceiver implementation.
    // @dev Version is bumped when changes are made to this contract.
    uint64 internal constant RECEIVER_VERSION = 2;

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     *
     * @dev Providing 0 as the default for OAppSender version. Indicates that the OAppSender is not implemented.
     * ie. this is a RECEIVE only OApp.
     * @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions.
     */
    function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
        return (0, RECEIVER_VERSION);
    }

    /**
     * @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
     * @dev _origin The origin information containing the source endpoint and sender address.
     *  - srcEid: The source chain endpoint ID.
     *  - sender: The sender address on the src chain.
     *  - nonce: The nonce of the message.
     * @dev _message The lzReceive payload.
     * @param _sender The sender address.
     * @return isSender Is a valid sender.
     *
     * @dev Applications can optionally choose to implement separate composeMsg senders that are NOT the bridging layer.
     * @dev The default sender IS the OAppReceiver implementer.
     */
    function isComposeMsgSender(
        Origin calldata /*_origin*/,
        bytes calldata /*_message*/,
        address _sender
    ) public view virtual returns (bool) {
        return _sender == address(this);
    }

    /**
     * @notice Checks if the path initialization is allowed based on the provided origin.
     * @param origin The origin information containing the source endpoint and sender address.
     * @return Whether the path has been initialized.
     *
     * @dev This indicates to the endpoint that the OApp has enabled msgs for this particular path to be received.
     * @dev This defaults to assuming if a peer has been set, its initialized.
     * Can be overridden by the OApp if there is other logic to determine this.
     */
    function allowInitializePath(Origin calldata origin) public view virtual returns (bool) {
        return peers[origin.srcEid] == origin.sender;
    }

    /**
     * @notice Retrieves the next nonce for a given source endpoint and sender address.
     * @dev _srcEid The source endpoint ID.
     * @dev _sender The sender address.
     * @return nonce The next nonce.
     *
     * @dev The path nonce starts from 1. If 0 is returned it means that there is NO nonce ordered enforcement.
     * @dev Is required by the off-chain executor to determine the OApp expects msg execution is ordered.
     * @dev This is also enforced by the OApp.
     * @dev By default this is NOT enabled. ie. nextNonce is hardcoded to return 0.
     */
    function nextNonce(uint32 /*_srcEid*/, bytes32 /*_sender*/) public view virtual returns (uint64 nonce) {
        return 0;
    }

    /**
     * @dev Entry point for receiving messages or packets from the endpoint.
     * @param _origin The origin information containing the source endpoint and sender address.
     *  - srcEid: The source chain endpoint ID.
     *  - sender: The sender address on the src chain.
     *  - nonce: The nonce of the message.
     * @param _guid The unique identifier for the received LayerZero message.
     * @param _message The payload of the received message.
     * @param _executor The address of the executor for the received message.
     * @param _extraData Additional arbitrary data provided by the corresponding executor.
     *
     * @dev Entry point for receiving msg/packet from the LayerZero endpoint.
     */
    function lzReceive(
        Origin calldata _origin,
        bytes32 _guid,
        bytes calldata _message,
        address _executor,
        bytes calldata _extraData
    ) public payable virtual {
        // Ensures that only the endpoint can attempt to lzReceive() messages to this OApp.
        if (address(endpoint) != msg.sender) revert OnlyEndpoint(msg.sender);

        // Ensure that the sender matches the expected peer for the source endpoint.
        if (_getPeerOrRevert(_origin.srcEid) != _origin.sender) revert OnlyPeer(_origin.srcEid, _origin.sender);

        // Call the internal OApp implementation of lzReceive.
        _lzReceive(_origin, _guid, _message, _executor, _extraData);
    }

    /**
     * @dev Internal function to implement lzReceive logic without needing to copy the basic parameter validation.
     */
    function _lzReceive(
        Origin calldata _origin,
        bytes32 _guid,
        bytes calldata _message,
        address _executor,
        bytes calldata _extraData
    ) internal virtual;
}


// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol@v4.9.6

// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}


// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.9.6

// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}


// File @openzeppelin/contracts/utils/Address.sol@v4.9.6

// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol@v4.9.6

// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}


// File @layerzerolabs/oapp-evm/contracts/oapp/OAppSender.sol@v0.3.2

/**
 * @title OAppSender
 * @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
 */
abstract contract OAppSender is OAppCore {
    using SafeERC20 for IERC20;

    // Custom error messages
    error NotEnoughNative(uint256 msgValue);
    error LzTokenUnavailable();

    // @dev The version of the OAppSender implementation.
    // @dev Version is bumped when changes are made to this contract.
    uint64 internal constant SENDER_VERSION = 2;

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     *
     * @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
     * ie. this is a SEND only OApp.
     * @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
     */
    function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
        return (SENDER_VERSION, 0);
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
     * @return fee The calculated MessagingFee for the message.
     *      - nativeFee: The native fee for the message.
     *      - lzTokenFee: The LZ token fee for the message.
     */
    function _quote(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        bool _payInLzToken
    ) internal view virtual returns (MessagingFee memory fee) {
        return
            endpoint.quote(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
                address(this)
            );
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _fee The calculated LayerZero fee for the message.
     *      - nativeFee: The native fee.
     *      - lzTokenFee: The lzToken fee.
     * @param _refundAddress The address to receive any excess fee values sent to the endpoint.
     * @return receipt The receipt for the sent message.
     *      - guid: The unique identifier for the sent message.
     *      - nonce: The nonce of the sent message.
     *      - fee: The LayerZero fee incurred for the message.
     */
    function _lzSend(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        MessagingFee memory _fee,
        address _refundAddress
    ) internal virtual returns (MessagingReceipt memory receipt) {
        // @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
        uint256 messageValue = _payNative(_fee.nativeFee);
        if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);

        return
            // solhint-disable-next-line check-send-result
            endpoint.send{ value: messageValue }(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenF