AIDollarAlphaUSDC

{{
  "language": "Solidity",
  "sources": {
    "contracts/pre-vaults/AIDollarAlphaUSDC.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.21;

import { BaseAIDollarAlpha } from "./BaseAIDollarAlpha.sol";
import { IPool } from "@aave/core-v3/contracts/interfaces/IPool.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

contract AIDollarAlphaUSDC is BaseAIDollarAlpha {
    using SafeERC20 for IERC20;

    IPool public aaveLendingPool;
    IERC20 public aToken;

    constructor(
        IERC20 asset,
        address admin,
        uint256 maxDepositLimit,
        IPool _aaveLendingPool,
        IERC20 _aToken
    )
        BaseAIDollarAlpha(asset, admin, maxDepositLimit, "AI Dollar Alpha USDC", "AIDaUSDC")
    {
        aaveLendingPool = _aaveLendingPool;
        aToken = _aToken;
        asset.forceApprove(address(_aaveLendingPool), type(uint256).max);
    }

    function _earn(uint256 amount) internal override {
        aaveLendingPool.supply(address(asset()), amount, address(this), 0);
    }

    function _unearn(uint256 amount) internal override {
        aaveLendingPool.withdraw(address(asset()), amount, address(this));
    }

    function _claimProfit() internal override {
        IERC20 assetToken = IERC20(asset());
        uint256 totalBalance = assetToken.balanceOf(address(this)) + aToken.balanceOf(address(this));
        uint256 profit = totalBalance > totalDeposit ? totalBalance - totalDeposit : 0;
        if (profit > assetToken.balanceOf(address(this))) revert("Insufficient balance");

        claimedProfit += profit;
        assetToken.safeTransfer(msg.sender, profit);
        emit ProfitClaimed(profit);
    }
}
"
    },
    "contracts/pre-vaults/BaseAIDollarAlpha.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity ^0.8.21;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { ERC4626 } from "@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol";
import { AccessControlEnumerable } from "@openzeppelin/contracts/access/extensions/AccessControlEnumerable.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import { ERC20, ERC20Permit } from "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";
import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { ECDSA } from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";

abstract contract BaseAIDollarAlpha is ERC4626, AccessControlEnumerable, ReentrancyGuard, ERC20Permit {
    using SafeERC20 for IERC20;

    bytes32 public constant MANAGER_ROLE = keccak256("MANAGER_ROLE");

    bool public withdrawEnabled;
    uint256 public maxDepositLimit;
    uint256 public totalDeposit;
    uint256 public claimedProfit;

    event WithdrawToggled(bool enabled);
    event ProfitClaimed(uint256 amount);
    event MaxDepositLimitSet(uint256 oldLimit, uint256 newLimit);

    constructor(
        IERC20 asset,
        address admin,
        uint256 _maxDepositLimit,
        string memory name,
        string memory symbol
    )
        ERC4626(asset)
        ERC20(name, symbol)
        ERC20Permit(name)
    {
        withdrawEnabled = false;
        maxDepositLimit = _maxDepositLimit;

        _grantRole(DEFAULT_ADMIN_ROLE, admin);
        _grantRole(MANAGER_ROLE, msg.sender);
    }

    // External functions - State modifying
    function toggleWithdraw() external onlyRole(DEFAULT_ADMIN_ROLE) {
        withdrawEnabled = !withdrawEnabled;
        emit WithdrawToggled(withdrawEnabled);
    }

    function setMaxDepositLimit(uint256 newLimit) external onlyRole(DEFAULT_ADMIN_ROLE) {
        uint256 oldLimit = maxDepositLimit;
        maxDepositLimit = newLimit;
        emit MaxDepositLimitSet(oldLimit, newLimit);
    }

    function sweep(IERC20 token, uint256 amount) external onlyRole(DEFAULT_ADMIN_ROLE) {
        if (address(token) == address(0)) {
            uint256 balance = address(this).balance;
            Address.sendValue(payable(msg.sender), amount > balance ? balance : amount);
        } else {
            uint256 balance = token.balanceOf(address(this));
            token.safeTransfer(msg.sender, amount > balance ? balance : amount);
        }
    }

    function execute(address to, bytes calldata data) external payable onlyRole(DEFAULT_ADMIN_ROLE) returns (bool, bytes memory) {
        (bool success, bytes memory result) = to.call{ value: msg.value }(data);

        return (success, result);
    }

    // Hooks for yield logic
    function earn(uint256 amount) external onlyRole(DEFAULT_ADMIN_ROLE) {
        _earn(amount);
    }

    function unearn(uint256 amount) external onlyRole(DEFAULT_ADMIN_ROLE) {
        _unearn(amount);
    }

    function claimProfit() external onlyRole(DEFAULT_ADMIN_ROLE) {
        _claimProfit();
    }

    // Public functions - State modifying
    function deposit(uint256 assets, address receiver) public virtual override nonReentrant returns (uint256) {
        require(totalAssets() + assets <= maxDepositLimit, "Deposit exceeds limit");
        uint256 shares = super.deposit(assets, receiver);
        totalDeposit += assets;
        return shares;
    }

    function mint(uint256 shares, address receiver) public virtual override nonReentrant returns (uint256) {
        uint256 assets = previewMint(shares);
        require(totalAssets() + assets <= maxDepositLimit, "Mint exceeds limit");
        super.mint(shares, receiver);
        totalDeposit += assets;
        return assets;
    }

    function withdraw(uint256 assets, address receiver, address owner) public virtual override nonReentrant returns (uint256) {
        require(withdrawEnabled, "Withdraw is disabled");
        uint256 shares = super.withdraw(assets, receiver, owner);
        totalDeposit -= assets;
        return shares;
    }

    function redeem(uint256 shares, address receiver, address owner) public virtual override nonReentrant returns (uint256) {
        require(withdrawEnabled, "Withdraw is disabled");
        uint256 assets = super.redeem(shares, receiver, owner);
        totalDeposit -= assets;
        return assets;
    }

    // Public view functions
    function isValidateSignature(bytes32 hash, bytes memory signature) public view returns (bytes4) {
        if (hasRole(MANAGER_ROLE, ECDSA.recover(hash, signature))) {
            return 0x1626ba7e;
        }
        return 0x00000000;
    }

    function totalAssets() public view virtual override returns (uint256) {
        return totalDeposit;
    }

    function decimals() public view virtual override(ERC20, ERC4626) returns (uint8) {
        return ERC4626.decimals();
    }

    // Internal virtual functions to be implemented by child contracts
    function _earn(uint256 amount) internal virtual;
    function _unearn(uint256 amount) internal virtual;
    function _claimProfit() internal virtual;
}
"
    },
    "lib/aave-v3-core/contracts/interfaces/IPool.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;

  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;

  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/token/ERC20/extensions/ERC4626.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20, IERC20Metadata, ERC20} from "../ERC20.sol";
import {SafeERC20} from "../utils/SafeERC20.sol";
import {IERC4626} from "../../../interfaces/IERC4626.sol";
import {Math} from "../../../utils/math/Math.sol";

/**
 * @dev Implementation of the ERC4626 "Tokenized Vault Standard" as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[EIP-4626].
 *
 * This extension allows the minting and burning of "shares" (represented using the ERC20 inheritance) in exchange for
 * underlying "assets" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends
 * the ERC20 standard. Any additional extensions included along it would affect the "shares" token represented by this
 * contract and not the "assets" token which is an independent contract.
 *
 * [CAUTION]
 * ====
 * In empty (or nearly empty) ERC-4626 vaults, deposits are at high risk of being stolen through frontrunning
 * with a "donation" to the vault that inflates the price of a share. This is variously known as a donation or inflation
 * attack and is essentially a problem of slippage. Vault deployers can protect against this attack by making an initial
 * deposit of a non-trivial amount of the asset, such that price manipulation becomes infeasible. Withdrawals may
 * similarly be affected by slippage. Users can protect against this attack as well as unexpected slippage in general by
 * verifying the amount received is as expected, using a wrapper that performs these checks such as
 * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].
 *
 * Since v4.9, this implementation uses virtual assets and shares to mitigate that risk. The `_decimalsOffset()`
 * corresponds to an offset in the decimal representation between the underlying asset's decimals and the vault
 * decimals. This offset also determines the rate of virtual shares to virtual assets in the vault, which itself
 * determines the initial exchange rate. While not fully preventing the attack, analysis shows that the default offset
 * (0) makes it non-profitable, as a result of the value being captured by the virtual shares (out of the attacker's
 * donation) matching the attacker's expected gains. With a larger offset, the attack becomes orders of magnitude more
 * expensive than it is profitable. More details about the underlying math can be found
 * xref:erc4626.adoc#inflation-attack[here].
 *
 * The drawback of this approach is that the virtual shares do capture (a very small) part of the value being accrued
 * to the vault. Also, if the vault experiences losses, the users try to exit the vault, the virtual shares and assets
 * will cause the first user to exit to experience reduced losses in detriment to the last users that will experience
 * bigger losses. Developers willing to revert back to the pre-v4.9 behavior just need to override the
 * `_convertToShares` and `_convertToAssets` functions.
 *
 * To learn more, check out our xref:ROOT:erc4626.adoc[ERC-4626 guide].
 * ====
 */
abstract contract ERC4626 is ERC20, IERC4626 {
    using Math for uint256;

    IERC20 private immutable _asset;
    uint8 private immutable _underlyingDecimals;

    /**
     * @dev Attempted to deposit more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxDeposit(address receiver, uint256 assets, uint256 max);

    /**
     * @dev Attempted to mint more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);

    /**
     * @dev Attempted to withdraw more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);

    /**
     * @dev Attempted to redeem more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);

    /**
     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC20 or ERC777).
     */
    constructor(IERC20 asset_) {
        (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);
        _underlyingDecimals = success ? assetDecimals : 18;
        _asset = asset_;
    }

    /**
     * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.
     */
    function _tryGetAssetDecimals(IERC20 asset_) private view returns (bool, uint8) {
        (bool success, bytes memory encodedDecimals) = address(asset_).staticcall(
            abi.encodeCall(IERC20Metadata.decimals, ())
        );
        if (success && encodedDecimals.length >= 32) {
            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));
            if (returnedDecimals <= type(uint8).max) {
                return (true, uint8(returnedDecimals));
            }
        }
        return (false, 0);
    }

    /**
     * @dev Decimals are computed by adding the decimal offset on top of the underlying asset's decimals. This
     * "original" value is cached during construction of the vault contract. If this read operation fails (e.g., the
     * asset has not been created yet), a default of 18 is used to represent the underlying asset's decimals.
     *
     * See {IERC20Metadata-decimals}.
     */
    function decimals() public view virtual override(IERC20Metadata, ERC20) returns (uint8) {
        return _underlyingDecimals + _decimalsOffset();
    }

    /** @dev See {IERC4626-asset}. */
    function asset() public view virtual returns (address) {
        return address(_asset);
    }

    /** @dev See {IERC4626-totalAssets}. */
    function totalAssets() public view virtual returns (uint256) {
        return _asset.balanceOf(address(this));
    }

    /** @dev See {IERC4626-convertToShares}. */
    function convertToShares(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-convertToAssets}. */
    function convertToAssets(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxDeposit}. */
    function maxDeposit(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxMint}. */
    function maxMint(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxWithdraw}. */
    function maxWithdraw(address owner) public view virtual returns (uint256) {
        return _convertToAssets(balanceOf(owner), Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxRedeem}. */
    function maxRedeem(address owner) public view virtual returns (uint256) {
        return balanceOf(owner);
    }

    /** @dev See {IERC4626-previewDeposit}. */
    function previewDeposit(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-previewMint}. */
    function previewMint(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewWithdraw}. */
    function previewWithdraw(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewRedeem}. */
    function previewRedeem(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-deposit}. */
    function deposit(uint256 assets, address receiver) public virtual returns (uint256) {
        uint256 maxAssets = maxDeposit(receiver);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);
        }

        uint256 shares = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-mint}.
     *
     * As opposed to {deposit}, minting is allowed even if the vault is in a state where the price of a share is zero.
     * In this case, the shares will be minted without requiring any assets to be deposited.
     */
    function mint(uint256 shares, address receiver) public virtual returns (uint256) {
        uint256 maxShares = maxMint(receiver);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);
        }

        uint256 assets = previewMint(shares);
        _deposit(_msgSender(), receiver, assets, shares);

        return assets;
    }

    /** @dev See {IERC4626-withdraw}. */
    function withdraw(uint256 assets, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxAssets = maxWithdraw(owner);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);
        }

        uint256 shares = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-redeem}. */
    function redeem(uint256 shares, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxShares = maxRedeem(owner);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);
        }

        uint256 assets = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return assets;
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     */
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256) {
        return assets.mulDiv(totalSupply() + 10 ** _decimalsOffset(), totalAssets() + 1, rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256) {
        return shares.mulDiv(totalAssets() + 1, totalSupply() + 10 ** _decimalsOffset(), rounding);
    }

    /**
     * @dev Deposit/mint common workflow.
     */
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual {
        // If _asset is ERC777, `transferFrom` can trigger a reentrancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transferred and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20.safeTransferFrom(_asset, caller, address(this), assets);
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev Withdraw/redeem common workflow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }

        // If _asset is ERC777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transferred, which is a valid state.
        _burn(owner, shares);
        SafeERC20.safeTransfer(_asset, receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _decimalsOffset() internal view virtual returns (uint8) {
        return 0;
    }
}
"
    },
    "lib/openzeppelin-contracts/contracts/access/extensions/AccessControlEnumerable.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/extensions/AccessControlEnumerable.sol)

pragma solidity ^0.8.20;

import {IAccessControlEnumerable} from "./IAccessControlEnumerable.sol";
import {AccessControl} from "../AccessControl.sol";
import {EnumerableSet} from "../../utils/structs/EnumerableSet.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 role => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {AccessControl-_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override returns (bool) {
        bool granted = super._grantRole(role, account);
        if (granted) {
            _roleMembers[role].add(account);
        }
        return granted;
    }

    /**
     * @dev Overload {AccessControl-_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override returns (bool) {
        bool revoked = super._revokeRole(role, account);
        if (revoked) {
            _roleMembers[role].remove(account);
        }
        return revoked;
    }
}
"
    },
    "lib/openz