L2CustomGateway

{{
  "language": "Solidity",
  "sources": {
    "contracts/tokenbridge/arbitrum/gateway/L2CustomGateway.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "./L2ArbitrumGateway.sol";
import "../../libraries/gateway/ICustomGateway.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";

contract L2CustomGateway is L2ArbitrumGateway, ICustomGateway {
    // stores addresses of L2 tokens to be used
    mapping(address => address) public override l1ToL2Token;

    function initialize(address _l1Counterpart, address _router) public {
        L2ArbitrumGateway._initialize(_l1Counterpart, _router);
    }

    /**
     * @notice internal utility function used to handle when no contract is deployed at expected address
     */
    function handleNoContract(
        address _l1Token,
        address, /* expectedL2Address */
        address _from,
        address, /* _to */
        uint256 _amount,
        bytes memory /* gatewayData */
    ) internal override returns (bool shouldHalt) {
        // it is assumed that the custom token is deployed in the L2 before deposits are made
        // trigger withdrawal
        // we don't need the return value from triggerWithdrawal since this is forcing a withdrawal back to the L1
        // instead of composing with a L2 dapp
        triggerWithdrawal(_l1Token, address(this), _from, _amount, "");
        return true;
    }

    /**
     * @notice Calculate the address used when bridging an ERC20 token
     * @dev the L1 and L2 address oracles may not always be in sync.
     * For example, a custom token may have been registered but not deploy or the contract self destructed.
     * @param l1ERC20 address of L1 token
     * @return L2 address of a bridged ERC20 token
     */
    function calculateL2TokenAddress(address l1ERC20) public view override returns (address) {
        return l1ToL2Token[l1ERC20];
    }

    function registerTokenFromL1(address[] calldata l1Address, address[] calldata l2Address)
        external
        onlyCounterpartGateway
    {
        // we assume both arrays are the same length, safe since its encoded by the L1
        for (uint256 i = 0; i < l1Address.length; i++) {
            // here we don't check if l2Address is a contract and instead deal with that behaviour
            // in `handleNoContract` this way we keep the l1 and l2 address oracles in sync
            l1ToL2Token[l1Address[i]] = l2Address[i];
            emit TokenSet(l1Address[i], l2Address[i]);
        }
    }
}
"
    },
    "contracts/tokenbridge/arbitrum/gateway/L2ArbitrumGateway.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/Address.sol";
import "../../libraries/AddressAliasHelper.sol";
import "../../libraries/BytesLib.sol";
import "../../libraries/ProxyUtil.sol";

import "../IArbToken.sol";

import "../L2ArbitrumMessenger.sol";
import "../../libraries/gateway/GatewayMessageHandler.sol";
import "../../libraries/gateway/TokenGateway.sol";

/**
 * @title Common interface for gatways on Arbitrum messaging to L1.
 */
abstract contract L2ArbitrumGateway is L2ArbitrumMessenger, TokenGateway {
    using Address for address;

    uint256 public exitNum;

    event DepositFinalized(
        address indexed l1Token,
        address indexed _from,
        address indexed _to,
        uint256 _amount
    );

    event WithdrawalInitiated(
        address l1Token,
        address indexed _from,
        address indexed _to,
        uint256 indexed _l2ToL1Id,
        uint256 _exitNum,
        uint256 _amount
    );

    modifier onlyCounterpartGateway() override {
        require(
            msg.sender == AddressAliasHelper.applyL1ToL2Alias(counterpartGateway),
            "ONLY_COUNTERPART_GATEWAY"
        );
        _;
    }

    function postUpgradeInit() external {
        // it is assumed the L2 Arbitrum Gateway contract is behind a Proxy controlled by a proxy admin
        // this function can only be called by the proxy admin contract
        address proxyAdmin = ProxyUtil.getProxyAdmin();
        require(msg.sender == proxyAdmin, "NOT_FROM_ADMIN");
        // this has no other logic since the current upgrade doesn't require this logic
    }

    function _initialize(address _l1Counterpart, address _router) internal override {
        TokenGateway._initialize(_l1Counterpart, _router);
        // L1 gateway must have a router
        require(_router != address(0), "BAD_ROUTER");
    }

    function createOutboundTx(
        address _from,
        uint256, /* _tokenAmount */
        bytes memory _outboundCalldata
    ) internal virtual returns (uint256) {
        // We make this function virtual since outboundTransfer logic is the same for many gateways
        // but sometimes (ie weth) you construct the outgoing message differently.

        // exitNum incremented after being included in _outboundCalldata
        exitNum++;
        return
            sendTxToL1(
                // default to sending no callvalue to the L1
                0,
                _from,
                counterpartGateway,
                _outboundCalldata
            );
    }

    function getOutboundCalldata(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _data
    ) public view override returns (bytes memory outboundCalldata) {
        outboundCalldata = abi.encodeWithSelector(
            ITokenGateway.finalizeInboundTransfer.selector,
            _token,
            _from,
            _to,
            _amount,
            GatewayMessageHandler.encodeFromL2GatewayMsg(exitNum, _data)
        );

        return outboundCalldata;
    }

    function outboundTransfer(
        address _l1Token,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) public payable returns (bytes memory) {
        return outboundTransfer(_l1Token, _to, _amount, 0, 0, _data);
    }

    /**
     * @notice Initiates a token withdrawal from Arbitrum to Ethereum
     * @param _l1Token l1 address of token
     * @param _to destination address
     * @param _amount amount of tokens withdrawn
     * @return res encoded unique identifier for withdrawal
     */
    function outboundTransfer(
        address _l1Token,
        address _to,
        uint256 _amount,
        uint256, /* _maxGas */
        uint256, /* _gasPriceBid */
        bytes calldata _data
    ) public payable virtual override returns (bytes memory res) {
        // This function is set as public and virtual so that subclasses can override
        // it and add custom validation for callers (ie only whitelisted users)

        // the function is marked as payable to conform to the inheritance setup
        // this particular code path shouldn't have a msg.value > 0
        // TODO: remove this invariant for execution markets
        require(msg.value == 0, "NO_VALUE");

        address _from;
        bytes memory _extraData;
        {
            if (isRouter(msg.sender)) {
                (_from, _extraData) = GatewayMessageHandler.parseFromRouterToGateway(_data);
            } else {
                _from = msg.sender;
                _extraData = _data;
            }
        }
        // the inboundEscrowAndCall functionality has been disabled, so no data is allowed
        require(_extraData.length == 0, "EXTRA_DATA_DISABLED");

        uint256 id;
        {
            address l2Token = calculateL2TokenAddress(_l1Token);
            require(l2Token.isContract(), "TOKEN_NOT_DEPLOYED");
            require(_isValidTokenAddress(_l1Token, l2Token), "NOT_EXPECTED_L1_TOKEN");

            _amount = outboundEscrowTransfer(l2Token, _from, _amount);
            id = triggerWithdrawal(_l1Token, _from, _to, _amount, _extraData);
        }
        return abi.encode(id);
    }

    function triggerWithdrawal(
        address _l1Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _data
    ) internal returns (uint256) {
        // exit number used for tradeable exits
        uint256 currExitNum = exitNum;
        // unique id used to identify the L2 to L1 tx
        uint256 id = createOutboundTx(
            _from,
            _amount,
            getOutboundCalldata(_l1Token, _from, _to, _amount, _data)
        );
        emit WithdrawalInitiated(_l1Token, _from, _to, id, currExitNum, _amount);
        return id;
    }

    function outboundEscrowTransfer(
        address _l2Token,
        address _from,
        uint256 _amount
    ) internal virtual returns (uint256 amountBurnt) {
        // this method is virtual since different subclasses can handle escrow differently
        // user funds are escrowed on the gateway using this function
        // burns L2 tokens in order to release escrowed L1 tokens
        IArbToken(_l2Token).bridgeBurn(_from, _amount);
        // by default we assume that the amount we send to bridgeBurn is the amount burnt
        // this might not be the case for every token
        return _amount;
    }

    function inboundEscrowTransfer(
        address _l2Address,
        address _dest,
        uint256 _amount
    ) internal virtual {
        // this method is virtual since different subclasses can handle escrow differently
        IArbToken(_l2Address).bridgeMint(_dest, _amount);
    }

    /**
     * @notice Mint on L2 upon L1 deposit.
     * If token not yet deployed and symbol/name/decimal data is included, deploys StandardArbERC20
     * @dev Callable only by the L1ERC20Gateway.outboundTransfer method. For initial deployments of a token the L1 L1ERC20Gateway
     * is expected to include the deployData. If not a L1 withdrawal is automatically triggered for the user
     * @param _token L1 address of ERC20
     * @param _from account that initiated the deposit in the L1
     * @param _to account to be credited with the tokens in the L2 (can be the user's L2 account or a contract)
     * @param _amount token amount to be minted to the user
     * @param _data encoded symbol/name/decimal data for deploy, in addition to any additional callhook data
     */
    function finalizeInboundTransfer(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external payable override onlyCounterpartGateway {
        (bytes memory gatewayData, bytes memory callHookData) = GatewayMessageHandler
            .parseFromL1GatewayMsg(_data);

        if (callHookData.length != 0) {
            // callHookData should always be 0 since inboundEscrowAndCall is disabled
            callHookData = bytes("");
        }

        address expectedAddress = calculateL2TokenAddress(_token);

        if (!expectedAddress.isContract()) {
            bool shouldHalt = handleNoContract(
                _token,
                expectedAddress,
                _from,
                _to,
                _amount,
                gatewayData
            );
            if (shouldHalt) return;
        }

        // validate if L1 address supplied matches that of the expected L2 address
        bool shouldWithdraw = !_isValidTokenAddress(_token, expectedAddress);
        if (shouldWithdraw) {
            // we don't need the return value from triggerWithdrawal since this is forcing
            // a withdrawal back to the L1 instead of composing with a L2 dapp
            triggerWithdrawal(_token, address(this), _from, _amount, "");
            return;
        }

        inboundEscrowTransfer(expectedAddress, _to, _amount);
        emit DepositFinalized(_token, _from, _to, _amount);

        return;
    }

    // returns if function should halt after
    function handleNoContract(
        address _l1Token,
        address expectedL2Address,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory gatewayData
    ) internal virtual returns (bool shouldHalt);

    /**
     * @notice Check if expected token address matches the provided one
     * @param _l1Address provided address of L1 token
     * @param _expectedL2Address address of L2 gateway expects
     * @return true if addresses match, false otherwise
     */
    function _isValidTokenAddress(address _l1Address, address _expectedL2Address)
        internal
        view
        virtual
        returns (bool)
    {
        (bool success, bytes memory _l1AddressData) =
            _expectedL2Address.staticcall(abi.encodeWithSelector(IArbToken.l1Address.selector));

        if (!success || _l1AddressData.length < 32) {
            return false;
        } else {
            // we do this in the else branch since we want to avoid reverts
            // and `toAddress` reverts if _l1AddressData has a short length
            // `_l1AddressData` should be 12 bytes of padding then 20 bytes for the address
            address expectedL1Address = BytesLib.toAddress(_l1AddressData, 12);
            if (expectedL1Address != _l1Address) {
                return false;
            }
        }

        return true;
    }
}"
    },
    "contracts/tokenbridge/libraries/gateway/ICustomGateway.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;

// import "./ITokenGateway.sol";

interface ICustomGateway {
    function l1ToL2Token(address _l1Token) external view returns (address _l2Token);

    event TokenSet(address indexed l1Address, address indexed l2Address);
}
"
    },
    "node_modules/@openzeppelin/contracts/token/ERC20/ERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
"
    },
    "contracts/tokenbridge/libraries/AddressAliasHelper.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

library AddressAliasHelper {
    uint160 constant offset = uint160(0x1111000000000000000000000000000000001111);

    /// @notice Utility function that converts the address in the L1 that submitted a tx to
    /// the inbox to the msg.sender viewed in the L2
    /// @param l1Address the address in the L1 that triggered the tx to L2
    /// @return l2Address L2 address as viewed in msg.sender
    function applyL1ToL2Alias(address l1Address) internal pure returns (address l2Address) {
        unchecked {
            l2Address = address(uint160(l1Address) + offset);
        }
    }

    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l2Address L2 address as viewed in msg.sender
    /// @return l1Address the address in the L1 that triggered the tx to L2
    function undoL1ToL2Alias(address l2Address) internal pure returns (address l1Address) {
        unchecked {
            l1Address = address(uint160(l2Address) - offset);
        }
    }
}
"
    },
    "contracts/tokenbridge/libraries/BytesLib.sol": {
      "content": "// SPDX-License-Identifier: MIT

/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <goncalo.sa@consensys.net>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */

pragma solidity ^0.8.0;

/* solhint-disable no-inline-assembly */
library BytesLib {
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= (_start + 20), "Read out of bounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= (_start + 1), "Read out of bounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= (_start + 32), "Read out of bounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= (_start + 32), "Read out of bounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }
}
/* solhint-enable no-inline-assembly */
"
    },
    "contracts/tokenbridge/libraries/ProxyUtil.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

library ProxyUtil {
    function getProxyAdmin() internal view returns (address admin) {
        // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0/contracts/proxy/TransparentUpgradeableProxy.sol#L48
        // Storage slot with the admin of the proxy contract.
        // This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
        bytes32 slot = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
        assembly {
            admin := sload(slot)
        }
    }
}
"
    },
    "contracts/tokenbridge/arbitrum/IArbToken.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title Minimum expected interface for L2 token that interacts with the L2 token bridge (this is the interface necessary
 * for a custom token that interacts with the bridge, see TestArbCustomToken.sol for an example implementation).
 * @dev For the token to be compatible out of the box with the tooling available (e.g., the Arbitrum bridge), it is
 * recommended to keep the implementation of this interface as close as possible to the `TestArbCustomToken` example.
 */

// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;

interface IArbToken {
    /**
     * @notice should increase token supply by amount, and should (probably) only be callable by the L1 bridge.
     */
    function bridgeMint(address account, uint256 amount) external;

    /**
     * @notice should decrease token supply by amount, and should (probably) only be callable by the L1 bridge.
     */
    function bridgeBurn(address account, uint256 amount) external;

    /**
     * @return address of layer 1 token
     */
    function l1Address() external view returns (address);
}
"
    },
    "contracts/tokenbridge/arbitrum/L2ArbitrumMessenger.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "@arbitrum/nitro-contracts/src/precompiles/ArbSys.sol";

/// @notice L2 utility contract to assist with L1 <=> L2 interactions
/// @dev this is an abstract contract instead of library so the functions can be easily overriden when testing
abstract contract L2ArbitrumMessenger {
    address internal constant ARB_SYS_ADDRESS = address(100);

    event TxToL1(address indexed _from, address indexed _to, uint256 indexed _id, bytes _data);

    function sendTxToL1(
        uint256 _l1CallValue,
        address _from,
        address _to,
        bytes memory _data
    ) internal returns (uint256) {
        uint256 _id = ArbSys(ARB_SYS_ADDRESS).sendTxToL1{ value: _l1CallValue }(_to, _data);
        emit TxToL1(_from, _to, _id, _data);
        return _id;
    }
}
"
    },
    "contracts/tokenbridge/libraries/gateway/GatewayMessageHandler.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

/// @notice this library manages encoding and decoding of gateway communication
library GatewayMessageHandler {
    // these are for communication from L1 to L2 gateway

    function encodeToL2GatewayMsg(bytes memory gatewayData, bytes memory callHookData)
        internal
        pure
        returns (bytes memory res)
    {
        res = abi.encode(gatewayData, callHookData);
    }

    function parseFromL1GatewayMsg(bytes calldata _data)
        internal
        pure
        returns (bytes memory gatewayData, bytes memory callHookData)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        (gatewayData, callHookData) = abi.decode(_data, (bytes, bytes));
    }

    // these are for communication from L2 to L1 gateway

    function encodeFromL2GatewayMsg(uint256 exitNum, bytes memory callHookData)
        internal
        pure
        returns (bytes memory res)
    {
        res = abi.encode(exitNum, callHookData);
    }

    function parseToL1GatewayMsg(bytes calldata _data)
        internal
        pure
        returns (uint256 exitNum, bytes memory callHookData)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        (exitNum, callHookData) = abi.decode(_data, (uint256, bytes));
    }

    // these are for communication from router to gateway

    function encodeFromRouterToGateway(address _from, bytes calldata _data)
        internal
        pure
        returns (bytes memory res)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        return abi.encode(_from, _data);
    }

    function parseFromRouterToGateway(bytes calldata _data)
        internal
        pure
        returns (address, bytes memory res)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        return abi.decode(_data, (address, bytes));
    }
}
"
    },
    "contracts/tokenbridge/libraries/gateway/TokenGateway.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "./ITokenGateway.sol";
import "@openzeppelin/contracts/utils/Address.sol";

abstract contract TokenGateway is ITokenGateway {
    using Address for address;

    address public counterpartGateway;
    address public router;

    // This modifier is overriden in gateways to validate the message sender
    // For L1 to L2 messages need to be validated against the aliased counterpartGateway
    // For L2 to L1 messages need to be validated against the bridge and L2ToL1Sender
    // prettier-ignore
    modifier onlyCounterpartGateway() virtual;

    function _initialize(address _counterpartGateway, address _router) internal virtual {
        // This initializes internal variables of the abstract contract it can be chained together with other functions.
        // It is virtual so subclasses can override or wrap around this logic.
        // An example where this is useful is different subclasses that validate the router address differently
        require(_counterpartGateway != address(0), "INVALID_COUNTERPART");
        require(counterpartGateway == address(0), "ALREADY_INIT");
        counterpartGateway = _counterpartGateway;
        router = _router;
    }

    function isRouter(address _target) internal view returns (bool isTargetRouter) {
        return _target == router;
    }

    /**
     * @notice Calculate the address used when bridging an ERC20 token
     * @dev the L1 and L2 address oracles may not always be in sync.
     * For example, a custom token may have been registered but not deploy or the contract self destructed.
     * @param l1ERC20 address of L1 token
     * @return L2 address of a bridged ERC20 token
     */
    function calculateL2TokenAddress(address l1ERC20)
        public
        view
        virtual
        override
        returns (address);
}
"
    },
    "node_modules/@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
"
    },
    "node_modules/@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/Context.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
"
    },
    "node_modules/@arbitrum/nitro-contracts/src/precompiles/ArbSys.sol": {
      "content": "// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/OffchainLabs/nitro-contracts/blob/main/LICENSE
// SPDX-License-Identifier: BUSL-1.1

pragma solidity >=0.4.21 <0.9.0;

/**
 * @title System level functionality
 * @notice For use by contracts to interact with core L2-specific functionality.
 * Precompiled contract that exists in every Arbitrum chain at address(100), 0x0000000000000000000000000000000000000064.
 */
interface ArbSys {
    /**
     * @notice Get Arbitrum block number (distinct from L1 block number; Arbitrum genesis block has block number 0)
     * @return block number as int
     */
    function arbBlockNumber() external view returns (uint256);

    /**
     * @notice Get Arbitrum block hash (reverts unless currentBlockNum-256 <= arbBlockNum < currentBlockNum)
     * @return block hash
     */
    function arbBlockHash(uint256 arbBlockNum) external view returns (bytes32);

    /**
     * @notice Gets the rollup's unique chain identifier
     * @return Chain identifier as int
     */
    function arbChainID() external view returns (uint256);

    /**
     * @notice Get internal version number identifying an ArbOS build
     * @return version number as int
     */
    function arbOSVersion() external view returns (uint256);

    /**
     * @notice Returns 0 since Nitro has no concept of storage gas
     * @return uint 0
     */
    function getStorageGasAvailable() external view returns (uint256);

    /**
     * @notice (deprecated) check if current call is top level (meaning it was triggered by an EoA or a L1 contract)
     * @dev this call has been deprecated and may be removed in a future release
     * @return true if current execution frame is not a call by another L2 contract
     */
    function isTopLevelCall() external view returns (bool);

    /**
     * @notice map L1 sender contract address to its L2 alias
     * @param sender sender address
     * @param unused argument no longer used
     * @return aliased sender address
     */
    function mapL1SenderContractAddressToL2Alias(address sender, address unused)
        external
        pure
        returns (address);

    /**
     * @notice check if the caller (of this caller of this) is an aliased L1 contract address
     * @return true iff the caller's address is an alias for an L1 contract address
     */
    function wasMyCallersAddressAliased() external view returns (bool);

    /**
     * @notice return the address of the caller (of this caller of this), without applying L1 contract address aliasing
     * @return address of the caller's caller, without applying L1 contract address aliasing
     */
    function myCallersAddressWithoutAliasing() external view returns (address);

    /**
     * @notice Send given amount of Eth to dest from sender.
     * This is a convenience function, which is equivalent to calling sendTxToL1 with empty data.
     * @param destination recipient address on L1
     * @return unique identifier for this L2-to-L1 transaction.
     */
    function withdrawEth(address destination) external payable returns (uint256);

    /**
     * @notice Send a transaction to L1
     * @dev it is not possible to execute on the L1 any L2-to-L1 transaction which contains data
     * to a contract address without any code (as enforced by the Bridge contract).
     * @param destination recipient address on L1
     * @param data (optional) calldata for L1 contract call
     * @return a unique identifier for this L2-to-L1 transaction.
     */
    function sendTxToL1(address destination, bytes calldata data)
        external
        payable
        returns (uint256);

    /**
     * @notice Get send Merkle tree state
     * @return size number of sends in the history
     * @return root root hash of the send history
     * @return partials hashes of partial subtrees in the send history tree
     */
    function sendMerkleTreeState()
        external
        view
        returns (
            uint256 size,
            bytes32 root,
            bytes32[] memory partials
        );

    /**
     * @notice creates a send txn from L2 to L1
     * @param position = (level << 192) + leaf = (0 << 192) + leaf = leaf
     */
    event L2ToL1Tx(
        address caller,
        address indexed destination,
        uint256 indexed hash,
        uint256 indexed position,
        uint256 arbBlockNum,
        uint256 ethBlockNum,
        uint256 timestamp,
        uint256 callvalue,
        bytes data
    );

    /// @dev DEPRECATED in favour of the new L2ToL1Tx event above after the nitro upgrade
    event L2ToL1Transaction(
        address caller,
        address indexed destination,
        uint256 indexed uniqueId,
        uint256 indexed batchNumber,
        uint256 indexInBatch,
        uint256 arbBlockNum,
        uint256 ethBlockNum,
        uint256 timestamp,
        uint256 callvalue,
        bytes data
    );

    /**
     * @notice logs a merkle branch for proof synthesis
     * @param reserved an index meant only to align the 4th index with L2ToL1Transaction's 4th event
     * @param hash the merkle hash
     * @param position = (level << 192) + leaf
     */
    event SendMerkleUpdate(
        uint256 indexed reserved,
        bytes32 indexed hash,
        uint256 indexed position
    );

    error InvalidBlockNumber(uint256 requested, uint256 current);
}
"
    },
    "contracts/tokenbridge/libraries/gateway/ITokenGateway.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;

interface ITokenGateway {
    /// @notice event deprecated in favor of DepositInitiated and WithdrawalInitiated
    // event OutboundTransferInitiated(
    //     address token,
    //     address indexed _from,
    //     address indexed _to,
    //     uint256 indexed _transferId,
    //     uint256 _amount,
    //     bytes _data
    // );

    /// @notice event deprecated in favor of DepositFinalized and WithdrawalFinalized
    // event InboundTransferFinalized(
    //     address token,
    //     address indexed _from,
    //     address indexed _to,
    //     uint256 indexed _transferId,
    //     uint256 _amount,
    //     bytes _data
    // );

    function outboundTransfer(
        address _token,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) external payable returns (bytes memory);

    function finalizeInboundTransfer(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external payable;

    /**
     * @notice Calculate the address used when bridging an ERC20 token
     * @dev the L1 and L2 address oracles may not always be in sync.
     * For example, a custom token may have been registered but not deploy or the contract self destructed.
     * @param l1ERC20 address of L1 token
     * @return L2 addre