L2GatewayRouter

{{
  "language": "Solidity",
  "sources": {
    "contracts/tokenbridge/arbitrum/gateway/L2GatewayRouter.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "../../libraries/gateway/GatewayRouter.sol";
import "../../ethereum/gateway/L1GatewayRouter.sol";
import "../L2ArbitrumMessenger.sol";
import "../../libraries/AddressAliasHelper.sol";

/**
 * @title Handles withdrawals from Ethereum into Arbitrum. Tokens are routered to their appropriate L2 gateway (Router itself also conforms to the Gateway interface).
 * @notice Router also serves as an L2-L1 token address oracle.
 */
contract L2GatewayRouter is GatewayRouter, L2ArbitrumMessenger {
    modifier onlyCounterpartGateway() override {
        require(
            msg.sender == AddressAliasHelper.applyL1ToL2Alias(counterpartGateway),
            "ONLY_COUNTERPART_GATEWAY"
        );
        _;
    }

    function initialize(address _counterpartGateway, address _defaultGateway) public {
        GatewayRouter._initialize(_counterpartGateway, address(0), _defaultGateway);
    }

    function setGateway(address[] memory _l1Token, address[] memory _gateway)
        external
        onlyCounterpartGateway
    {
        // counterpart gateway (L1 router) should never allow wrong lengths
        assert(_l1Token.length == _gateway.length);

        for (uint256 i = 0; i < _l1Token.length; i++) {
            l1TokenToGateway[_l1Token[i]] = _gateway[i];
            emit GatewaySet(_l1Token[i], _gateway[i]);
        }
    }

    function outboundTransfer(
        address _l1Token,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) public payable returns (bytes memory) {
        return outboundTransfer(_l1Token, _to, _amount, 0, 0, _data);
    }

    function setDefaultGateway(address newL2DefaultGateway) external onlyCounterpartGateway {
        defaultGateway = newL2DefaultGateway;
        emit DefaultGatewayUpdated(newL2DefaultGateway);
    }
}
"
    },
    "contracts/tokenbridge/libraries/gateway/GatewayRouter.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "../ProxyUtil.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "./TokenGateway.sol";
import "./GatewayMessageHandler.sol";
import "./IGatewayRouter.sol";

/**
 * @title Common interface for L1 and L2 Gateway Routers
 */
abstract contract GatewayRouter is TokenGateway, IGatewayRouter {
    using Address for address;

    address internal constant ZERO_ADDR = address(0);
    address internal constant DISABLED = address(1);

    mapping(address => address) public l1TokenToGateway;
    address public override defaultGateway;

    function postUpgradeInit() external {
        // it is assumed the L2 Arbitrum Gateway contract is behind a Proxy controlled by a proxy admin
        // this function can only be called by the proxy admin contract
        address proxyAdmin = ProxyUtil.getProxyAdmin();
        require(msg.sender == proxyAdmin, "NOT_FROM_ADMIN");
        // this has no other logic since the current upgrade doesn't require this logic
    }

    function _initialize(
        address _counterpartGateway,
        address _router,
        address _defaultGateway
    ) internal {
        // if you are a router, you can't have a router
        require(_router == address(0), "BAD_ROUTER");
        TokenGateway._initialize(_counterpartGateway, _router);
        // default gateway can have 0 address
        defaultGateway = _defaultGateway;
    }

    function finalizeInboundTransfer(
        address, /* _token */
        address, /* _from */
        address, /* _to */
        uint256, /* _amount */
        bytes calldata /* _data */
    ) external payable virtual override {
        revert("ONLY_OUTBOUND_ROUTER");
    }

    function outboundTransfer(
        address _token,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) public payable virtual override returns (bytes memory) {
        // this function is kept instead of delegating to outboundTransferCustomRefund to allow
        // compatibility with older gateways that did not implement outboundTransferCustomRefund
        address gateway = getGateway(_token);
        bytes memory gatewayData = GatewayMessageHandler.encodeFromRouterToGateway(
            msg.sender,
            _data
        );

        emit TransferRouted(_token, msg.sender, _to, gateway);
        return
            ITokenGateway(gateway).outboundTransfer{ value: msg.value }(
                _token,
                _to,
                _amount,
                _maxGas,
                _gasPriceBid,
                gatewayData
            );
    }

    function getOutboundCalldata(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _data
    ) public view virtual override returns (bytes memory) {
        address gateway = getGateway(_token);
        return TokenGateway(gateway).getOutboundCalldata(_token, _from, _to, _amount, _data);
    }

    function getGateway(address _token) public view virtual override returns (address gateway) {
        gateway = l1TokenToGateway[_token];

        if (gateway == ZERO_ADDR) {
            // if no gateway value set, use default gateway
            gateway = defaultGateway;
        }

        if (gateway == DISABLED || !gateway.isContract()) {
            // not a valid gateway
            return ZERO_ADDR;
        }

        return gateway;
    }

    function calculateL2TokenAddress(address l1ERC20)
        public
        view
        virtual
        override(TokenGateway, ITokenGateway)
        returns (address)
    {
        address gateway = getGateway(l1ERC20);
        if (gateway == ZERO_ADDR) {
            return ZERO_ADDR;
        }
        return TokenGateway(gateway).calculateL2TokenAddress(l1ERC20);
    }
}
"
    },
    "contracts/tokenbridge/ethereum/gateway/L1GatewayRouter.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "../../libraries/Whitelist.sol";

import { ArbitrumEnabledToken } from "../ICustomToken.sol";
import "../L1ArbitrumMessenger.sol";
import "../../libraries/gateway/GatewayRouter.sol";
import "../../arbitrum/gateway/L2GatewayRouter.sol";
import "../../libraries/ERC165.sol";
import "./IL1GatewayRouter.sol";
import "./IL1ArbitrumGateway.sol";

/**
 * @title Handles deposits from Erhereum into Arbitrum. Tokens are routered to their appropriate L1 gateway (Router itself also conforms to the Gateway itnerface).
 * @notice Router also serves as an L1-L2 token address oracle.
 */
contract L1GatewayRouter is
    WhitelistConsumer,
    L1ArbitrumMessenger,
    GatewayRouter,
    ERC165,
    IL1GatewayRouter
{
    using Address for address;

    address public override owner;
    address public override inbox;

    modifier onlyOwner() {
        require(msg.sender == owner, "ONLY_OWNER");
        _;
    }

    function initialize(
        address _owner,
        address _defaultGateway,
        address, // was _whitelist, now unused
        address _counterpartGateway,
        address _inbox
    ) public {
        GatewayRouter._initialize(_counterpartGateway, address(0), _defaultGateway);
        owner = _owner;
        WhitelistConsumer.whitelist = address(0);
        inbox = _inbox;
    }

    function setDefaultGateway(
        address newL1DefaultGateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost
    ) external payable virtual onlyOwner returns (uint256) {
        return
            _setDefaultGateway(
                newL1DefaultGateway,
                _maxGas,
                _gasPriceBid,
                _maxSubmissionCost,
                msg.value
            );
    }

    function _setDefaultGateway(
        address newL1DefaultGateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost,
        uint256 feeAmount
    ) internal returns (uint256) {
        defaultGateway = newL1DefaultGateway;

        emit DefaultGatewayUpdated(newL1DefaultGateway);

        address l2NewDefaultGateway;

        if (newL1DefaultGateway != address(0)) {
            l2NewDefaultGateway = TokenGateway(newL1DefaultGateway).counterpartGateway();
        }

        bytes memory data = abi.encodeWithSelector(
            L2GatewayRouter.setDefaultGateway.selector,
            l2NewDefaultGateway
        );

        return
            sendTxToL2(
                inbox,
                counterpartGateway,
                msg.sender,
                feeAmount,
                0,
                L2GasParams({
                    _maxSubmissionCost: _maxSubmissionCost,
                    _maxGas: _maxGas,
                    _gasPriceBid: _gasPriceBid
                }),
                data
            );
    }

    function setOwner(address newOwner) external onlyOwner {
        require(newOwner != address(0), "INVALID_OWNER");
        // set newOwner to address(1) to disable owner and keep `initialize` safe
        owner = newOwner;
    }

    /**
     * @notice Allows L1 Token contract to trustlessly register its gateway. (other setGateway method allows excess eth recovery from _maxSubmissionCost and is recommended)
     * @param _gateway l1 gateway address
     * @param _maxGas max gas for L2 retryable exrecution
     * @param _gasPriceBid gas price for L2 retryable ticket
     * @param  _maxSubmissionCost base submission cost  L2 retryable tick3et
     * @return Retryable ticket ID
     */
    function setGateway(
        address _gateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost
    ) external payable virtual override returns (uint256) {
        return setGateway(_gateway, _maxGas, _gasPriceBid, _maxSubmissionCost, msg.sender);
    }

    /**
     * @notice Allows L1 Token contract to trustlessly register its gateway.
     * @param _gateway l1 gateway address
     * @param _maxGas max gas for L2 retryable exrecution
     * @param _gasPriceBid gas price for L2 retryable ticket
     * @param  _maxSubmissionCost base submission cost  L2 retryable tick3et
     * @param _creditBackAddress address for crediting back overpayment of _maxSubmissionCost
     * @return Retryable ticket ID
     */
    function setGateway(
        address _gateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost,
        address _creditBackAddress
    ) public payable virtual override returns (uint256) {
        return
            _setGatewayWithCreditBack(
                _gateway,
                _maxGas,
                _gasPriceBid,
                _maxSubmissionCost,
                _creditBackAddress,
                msg.value
            );
    }

    function _setGatewayWithCreditBack(
        address _gateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost,
        address _creditBackAddress,
        uint256 feeAmount
    ) internal returns (uint256) {
        require(
            ArbitrumEnabledToken(msg.sender).isArbitrumEnabled() == uint8(0xb1),
            "NOT_ARB_ENABLED"
        );

        require(_gateway.isContract(), "NOT_TO_CONTRACT");

        address currGateway = getGateway(msg.sender);
        if (currGateway != address(0) && currGateway != defaultGateway) {
            // if gateway is already set to a non-default gateway, don't allow it to set a different gateway
            require(currGateway == _gateway, "NO_UPDATE_TO_DIFFERENT_ADDR");
        }

        address[] memory _tokenArr = new address[](1);
        _tokenArr[0] = address(msg.sender);

        address[] memory _gatewayArr = new address[](1);
        _gatewayArr[0] = _gateway;

        return
            _setGateways(
                _tokenArr,
                _gatewayArr,
                _maxGas,
                _gasPriceBid,
                _maxSubmissionCost,
                _creditBackAddress,
                feeAmount
            );
    }

    function setGateways(
        address[] memory _token,
        address[] memory _gateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost
    ) external payable virtual onlyOwner returns (uint256) {
        // it is assumed that token and gateway are both contracts
        // require(_token[i].isContract() && _gateway[i].isContract(), "NOT_CONTRACT");
        return
            _setGateways(
                _token,
                _gateway,
                _maxGas,
                _gasPriceBid,
                _maxSubmissionCost,
                msg.sender,
                msg.value
            );
    }

    function _setGateways(
        address[] memory _token,
        address[] memory _gateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost,
        address _creditBackAddress,
        uint256 feeAmount
    ) internal returns (uint256) {
        require(_token.length == _gateway.length, "WRONG_LENGTH");

        for (uint256 i = 0; i < _token.length; i++) {
            l1TokenToGateway[_token[i]] = _gateway[i];
            emit GatewaySet(_token[i], _gateway[i]);
            // overwrite memory so the L2 router receives the L2 address of each gateway
            if (_gateway[i] != address(0) && _gateway[i] != DISABLED) {
                // if we are assigning a gateway to the token, the address oracle of the gateway
                // must return something other than the 0 address
                // this check helps avoid misconfiguring gateways
                require(
                    TokenGateway(_gateway[i]).calculateL2TokenAddress(_token[i]) != address(0),
                    "TOKEN_NOT_HANDLED_BY_GATEWAY"
                );
                _gateway[i] = TokenGateway(_gateway[i]).counterpartGateway();
            }
        }

        bytes memory data = abi.encodeWithSelector(
            L2GatewayRouter.setGateway.selector,
            _token,
            _gateway
        );

        return
            sendTxToL2(
                inbox,
                counterpartGateway,
                _creditBackAddress,
                feeAmount,
                0,
                L2GasParams({
                    _maxSubmissionCost: _maxSubmissionCost,
                    _maxGas: _maxGas,
                    _gasPriceBid: _gasPriceBid
                }),
                data
            );
    }

    function outboundTransfer(
        address _token,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) public payable override(GatewayRouter, ITokenGateway) returns (bytes memory) {
        return super.outboundTransfer(_token, _to, _amount, _maxGas, _gasPriceBid, _data);
    }

    /**
     * @notice Deposit ERC20 token from Ethereum into Arbitrum using the registered or otherwise default gateway
     * @dev Some legacy gateway might not have the outboundTransferCustomRefund method and will revert, in such case use outboundTransfer instead
     *      L2 address alias will not be applied to the following types of addresses on L1:
     *      - an externally-owned account
     *      - a contract in construction
     *      - an address where a contract will be created
     *      - an address where a contract lived, but was destroyed
     *    The msg.sender that calls this method, or its L2 alias if it has code in L1, will be set to the callValueRefundAddress;
     *    this means it can cancel the retryable ticket if its auto-redeem fails, and also that it receives the l2 callvalue refund.
     * @param _token L1 address of ERC20
     * @param _refundTo Account, or its L2 alias if it have code in L1, to be credited with excess gas refund in L2
     * @param _to Account to be credited with the tokens in the L2 (can be an EOA or a contract), not subject to L2 aliasing.
     * @param _amount Token Amount
     * @param _maxGas Max gas deducted from user's L2 balance to cover L2 execution
     * @param _gasPriceBid Gas price for L2 execution
     * @param _data encoded data from router and user
     * @return res abi encoded inbox sequence number
     */
    function outboundTransferCustomRefund(
        address _token,
        address _refundTo,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) public payable override returns (bytes memory) {
        address gateway = getGateway(_token);
        bytes memory gatewayData = GatewayMessageHandler.encodeFromRouterToGateway(
            msg.sender,
            _data
        );

        emit TransferRouted(_token, msg.sender, _to, gateway);
        // here we use `IL1ArbitrumGateway` since we don't assume all ITokenGateway implements `outboundTransferCustomRefund`
        return
            IL1ArbitrumGateway(gateway).outboundTransferCustomRefund{ value: msg.value }(
                _token,
                _refundTo,
                _to,
                _amount,
                _maxGas,
                _gasPriceBid,
                gatewayData
            );
    }

    modifier onlyCounterpartGateway() override {
        // don't expect messages from L2 router
        revert("ONLY_COUNTERPART_GATEWAY");
        _;
    }

    function supportsInterface(bytes4 interfaceId)
        public
        view
        override(ERC165, IERC165)
        returns (bool)
    {
        // registering interfaces that is added after arb-bridge-peripherals >1.0.11
        // using function selector instead of single function interfaces to reduce bloat
        return
            interfaceId == this.outboundTransferCustomRefund.selector ||
            super.supportsInterface(interfaceId);
    }
}
"
    },
    "contracts/tokenbridge/arbitrum/L2ArbitrumMessenger.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "@arbitrum/nitro-contracts/src/precompiles/ArbSys.sol";

/// @notice L2 utility contract to assist with L1 <=> L2 interactions
/// @dev this is an abstract contract instead of library so the functions can be easily overriden when testing
abstract contract L2ArbitrumMessenger {
    address internal constant ARB_SYS_ADDRESS = address(100);

    event TxToL1(address indexed _from, address indexed _to, uint256 indexed _id, bytes _data);

    function sendTxToL1(
        uint256 _l1CallValue,
        address _from,
        address _to,
        bytes memory _data
    ) internal returns (uint256) {
        uint256 _id = ArbSys(ARB_SYS_ADDRESS).sendTxToL1{ value: _l1CallValue }(_to, _data);
        emit TxToL1(_from, _to, _id, _data);
        return _id;
    }
}
"
    },
    "contracts/tokenbridge/libraries/AddressAliasHelper.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

library AddressAliasHelper {
    uint160 constant offset = uint160(0x1111000000000000000000000000000000001111);

    /// @notice Utility function that converts the address in the L1 that submitted a tx to
    /// the inbox to the msg.sender viewed in the L2
    /// @param l1Address the address in the L1 that triggered the tx to L2
    /// @return l2Address L2 address as viewed in msg.sender
    function applyL1ToL2Alias(address l1Address) internal pure returns (address l2Address) {
        unchecked {
            l2Address = address(uint160(l1Address) + offset);
        }
    }

    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l2Address L2 address as viewed in msg.sender
    /// @return l1Address the address in the L1 that triggered the tx to L2
    function undoL1ToL2Alias(address l2Address) internal pure returns (address l1Address) {
        unchecked {
            l1Address = address(uint160(l2Address) - offset);
        }
    }
}
"
    },
    "contracts/tokenbridge/libraries/ProxyUtil.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

library ProxyUtil {
    function getProxyAdmin() internal view returns (address admin) {
        // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0/contracts/proxy/TransparentUpgradeableProxy.sol#L48
        // Storage slot with the admin of the proxy contract.
        // This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
        bytes32 slot = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
        assembly {
            admin := sload(slot)
        }
    }
}
"
    },
    "node_modules/@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
"
    },
    "contracts/tokenbridge/libraries/gateway/TokenGateway.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "./ITokenGateway.sol";
import "@openzeppelin/contracts/utils/Address.sol";

abstract contract TokenGateway is ITokenGateway {
    using Address for address;

    address public counterpartGateway;
    address public router;

    // This modifier is overriden in gateways to validate the message sender
    // For L1 to L2 messages need to be validated against the aliased counterpartGateway
    // For L2 to L1 messages need to be validated against the bridge and L2ToL1Sender
    // prettier-ignore
    modifier onlyCounterpartGateway() virtual;

    function _initialize(address _counterpartGateway, address _router) internal virtual {
        // This initializes internal variables of the abstract contract it can be chained together with other functions.
        // It is virtual so subclasses can override or wrap around this logic.
        // An example where this is useful is different subclasses that validate the router address differently
        require(_counterpartGateway != address(0), "INVALID_COUNTERPART");
        require(counterpartGateway == address(0), "ALREADY_INIT");
        counterpartGateway = _counterpartGateway;
        router = _router;
    }

    function isRouter(address _target) internal view returns (bool isTargetRouter) {
        return _target == router;
    }

    /**
     * @notice Calculate the address used when bridging an ERC20 token
     * @dev the L1 and L2 address oracles may not always be in sync.
     * For example, a custom token may have been registered but not deploy or the contract self destructed.
     * @param l1ERC20 address of L1 token
     * @return L2 address of a bridged ERC20 token
     */
    function calculateL2TokenAddress(address l1ERC20)
        public
        view
        virtual
        override
        returns (address);
}
"
    },
    "contracts/tokenbridge/libraries/gateway/GatewayMessageHandler.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

/// @notice this library manages encoding and decoding of gateway communication
library GatewayMessageHandler {
    // these are for communication from L1 to L2 gateway

    function encodeToL2GatewayMsg(bytes memory gatewayData, bytes memory callHookData)
        internal
        pure
        returns (bytes memory res)
    {
        res = abi.encode(gatewayData, callHookData);
    }

    function parseFromL1GatewayMsg(bytes calldata _data)
        internal
        pure
        returns (bytes memory gatewayData, bytes memory callHookData)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        (gatewayData, callHookData) = abi.decode(_data, (bytes, bytes));
    }

    // these are for communication from L2 to L1 gateway

    function encodeFromL2GatewayMsg(uint256 exitNum, bytes memory callHookData)
        internal
        pure
        returns (bytes memory res)
    {
        res = abi.encode(exitNum, callHookData);
    }

    function parseToL1GatewayMsg(bytes calldata _data)
        internal
        pure
        returns (uint256 exitNum, bytes memory callHookData)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        (exitNum, callHookData) = abi.decode(_data, (uint256, bytes));
    }

    // these are for communication from router to gateway

    function encodeFromRouterToGateway(address _from, bytes calldata _data)
        internal
        pure
        returns (bytes memory res)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        return abi.encode(_from, _data);
    }

    function parseFromRouterToGateway(bytes calldata _data)
        internal
        pure
        returns (address, bytes memory res)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        return abi.decode(_data, (address, bytes));
    }
}
"
    },
    "contracts/tokenbridge/libraries/gateway/IGatewayRouter.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "../ProxyUtil.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "./TokenGateway.sol";
import "./GatewayMessageHandler.sol";

/**
 * @title Common interface for L1 and L2 Gateway Routers
 */
interface IGatewayRouter is ITokenGateway {
    function defaultGateway() external view returns (address gateway);

    event TransferRouted(
        address indexed token,
        address indexed _userFrom,
        address indexed _userTo,
        address gateway
    );

    event GatewaySet(address indexed l1Token, address indexed gateway);
    event DefaultGatewayUpdated(address newDefaultGateway);

    function getGateway(address _token) external view returns (address gateway);
}
"
    },
    "contracts/tokenbridge/libraries/Whitelist.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

abstract contract WhitelistConsumer {
    address public whitelist;

    event WhitelistSourceUpdated(address newSource);

    modifier onlyWhitelisted() {
        if (whitelist != address(0)) {
            require(Whitelist(whitelist).isAllowed(msg.sender), "NOT_WHITELISTED");
        }
        _;
    }

    function updateWhitelistSource(address newSource) external {
        require(msg.sender == whitelist, "NOT_FROM_LIST");
        whitelist = newSource;
        emit WhitelistSourceUpdated(newSource);
    }
}

contract Whitelist {
    address public owner;
    mapping(address => bool) public isAllowed;

    event OwnerUpdated(address newOwner);
    event WhitelistUpgraded(address newWhitelist, address[] targets);

    constructor() {
        owner = msg.sender;
    }

    modifier onlyOwner() {
        require(msg.sender == owner, "ONLY_OWNER");
        _;
    }

    function setOwner(address newOwner) external onlyOwner {
        owner = newOwner;
        emit OwnerUpdated(newOwner);
    }

    function setWhitelist(address[] memory user, bool[] memory val) external onlyOwner {
        require(user.length == val.length, "INVALID_INPUT");

        for (uint256 i = 0; i < user.length; i++) {
            isAllowed[user[i]] = val[i];
        }
    }

    // set new whitelist to address(0) to disable whitelist
    function triggerConsumers(address newWhitelist, address[] memory targets) external onlyOwner {
        for (uint256 i = 0; i < targets.length; i++) {
            WhitelistConsumer(targets[i]).updateWhitelistSource(newWhitelist);
        }
        emit WhitelistUpgraded(newWhitelist, targets);
    }
}
"
    },
    "contracts/tokenbridge/ethereum/ICustomToken.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;

interface ArbitrumEnabledToken {
    /// @notice should return `0xb1` if token is enabled for arbitrum gateways
    /// @dev Previous implmentation used to return `uint8(0xa4b1)`, however that causes compile time error in Solidity 0.8. due to type mismatch.
    ///      In current version `uint8(0xb1)` shall be returned, which results in no change as that's the same value as truncated `uint8(0xa4b1)`.
    function isArbitrumEnabled() external view returns (uint8);
}

/**
 * @title Minimum expected interface for L1 custom token (see TestCustomTokenL1.sol for an example implementation)
 */
interface ICustomToken is ArbitrumEnabledToken {
    /**
     * @notice Should make an external call to EthERC20Bridge.registerCustomL2Token
     */
    function registerTokenOnL2(
        address l2CustomTokenAddress,
        uint256 maxSubmissionCostForCustomBridge,
        uint256 maxSubmissionCostForRouter,
        uint256 maxGasForCustomBridge,
        uint256 maxGasForRouter,
        uint256 gasPriceBid,
        uint256 valueForGateway,
        uint256 valueForRouter,
        address creditBackAddress
    ) external payable;

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    function balanceOf(address account) external view returns (uint256);
}

interface L1MintableToken is ICustomToken {
    function bridgeMint(address account, uint256 amount) external;
}

interface L1ReverseToken is L1MintableToken {
    function bridgeBurn(address account, uint256 amount) external;
}
"
    },
    "contracts/tokenbridge/ethereum/L1ArbitrumMessenger.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.8.0;

import "@arbitrum/nitro-contracts/src/bridge/IInbox.sol";
import "@arbitrum/nitro-contracts/src/bridge/IOutbox.sol";

/// @notice L1 utility contract to assist with L1 <=> L2 interactions
/// @dev this is an abstract contract instead of library so the functions can be easily overriden when testing
abstract contract L1ArbitrumMessenger {
    event TxToL2(address indexed _from, address indexed _to, uint256 indexed _seqNum, bytes _data);

    struct L2GasParams {
        uint256 _maxSubmissionCost;
        uint256 _maxGas;
        uint256 _gasPriceBid;
    }

    function sendTxToL2CustomRefund(
        address _inbox,
        address _to,
        address _refundTo,
        address _user,
        uint256 _l1CallValue,
        uint256 _l2CallValue,
        L2GasParams memory _l2GasParams,
        bytes memory _data
    ) internal returns (uint256) {
        // alternative function entry point when struggling with the stack size
        return
            sendTxToL2CustomRefund(
                _inbox,
                _to,
                _refundTo,
                _user,
                _l1CallValue,
                _l2CallValue,
                _l2GasParams._maxSubmissionCost,
                _l2GasParams._maxGas,
                _l2GasParams._gasPriceBid,
                _data
            );
    }

    function sendTxToL2(
        address _inbox,
        address _to,
        address _user,
        uint256 _l1CallValue,
        uint256 _l2CallValue,
        L2GasParams memory _l2GasParams,
        bytes memory _data
    ) internal returns (uint256) {
        // alternative function entry point when struggling with the stack size
        return
            sendTxToL2(
                _inbox,
                _to,
                _user,
                _l1CallValue,
                _l2CallValue,
                _l2GasParams._maxSubmissionCost,
                _l2GasParams._maxGas,
                _l2GasParams._gasPriceBid,
                _data
            );
    }

    function sendTxToL2CustomRefund(
        address _inbox,
        address _to,
        address _refundTo,
        address _user,
        uint256 _l1CallValue,
        uint256 _l2CallValue,
        uint256 _maxSubmissionCost,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes memory _data
    ) internal returns (uint256) {
        uint256 seqNum = _createRetryable(
            _inbox,
            _to,
            _refundTo,
            _user,
            _l1CallValue,
            _l2CallValue,
            _maxSubmissionCost,
            _maxGas,
            _gasPriceBid,
            _data
        );
        emit TxToL2(_user, _to, seqNum, _data);
        return seqNum;
    }

    function sendTxToL2(
        address _inbox,
        address _to,
        address _user,
        uint256 _l1CallValue,
        uint256 _l2CallValue,
        uint256 _maxSubmissionCost,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes memory _data
    ) internal returns (uint256) {
        return
            sendTxToL2CustomRefund(
                _inbox,
                _to,
                _user,
                _user,
                _l1CallValue,
                _l2CallValue,
                _maxSubmissionCost,
                _maxGas,
                _gasPriceBid,
                _data
            );
    }

    function getBridge(address _inbox) internal view returns (IBridge) {
        return IInbox(_inbox).bridge();
    }

    /// @dev the l2ToL1Sender behaves as the tx.origin, the msg.sender should be validated to protect against reentrancies
    function getL2ToL1Sender(address _inbox) internal view returns (address) {
        IOutbox outbox = IOutbox(getBridge(_inbox).activeOutbox());
        address l2ToL1Sender = outbox.l2ToL1Sender();

        require(l2ToL1Sender != address(0), "NO_SENDER");
        return l2ToL1Sender;
    }

    /**
     * @notice Calls inbox to create retryable ticket. Default implementation is for standard Eth-based rollup, but it can be overriden to create retryable in ERC20-based rollup.
     * @param _inbox address of the rollup's inbox
     * @param _to destination L2 contract address
     * @param _refundTo refund address for excess fee
     * @param _user refund address for callvalue
     * @param _totalFeeAmount amount of fees to pay, in Eth or native token, for retryable's execution
     * @param _l2CallValue call value for retryable L2 message
     * @param _maxSubmissionCost Max gas deducted from user's L2 balance to cover base submission fee
     * @param _maxGas Max gas deducted from user's L2 balance to cover L2 execution
     * @param _gasPriceBid price bid for L2 execution
     * @param _data ABI encoded data of L2 message
     * @return unique message number of the retryable transaction
     */
    function _createRetryable(
        address _inbox,
        address _to,
        address _refundTo,
        address _user,
        uint256 _totalFeeAmount,
        uint256 _l2CallValue,
        uint256 _maxSubmissionCost,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes memory _data
    ) internal virtual returns (uint256) {
        return
            IInbox(_inbox).createRetryableTicket{ value: _totalFeeAmount }(
                _to,
                _l2CallValue,
                _maxSubmissionCost,
                _refundTo,
                _user,
                _maxGas,
                _gasPriceBid,
                _data
            );
    }
}

interface IERC20Inbox {
    function createRetryableTicket(
        address to,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 gasLimit,
        uint256 maxFeePerGas,
        uint256 tokenTotalFeeAmount,
        bytes calldata data
    ) external returns (uint256);
}"
    },
    "contracts/tokenbridge/libraries/ERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

// With pragma modification to support ^0.6.11
// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/release-v4.6/contracts/utils/introspection/ERC165.sol

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
"
    },
    "contracts/tokenbridge/ethereum/gateway/IL1GatewayRouter.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;

import "../../libraries/gateway/ITokenGateway.sol";
import "../../libraries/IERC165.sol";

/**
 * @title Handles deposits from Erhereum into Arbitrum. Tokens are routered to their appropriate L1 gateway (Router itself also conforms to the Gateway itnerface).
 * @notice Router also serves as an L1-L2 token address oracle.
 */
interface IL1GatewayRouter is ITokenGateway, IERC165 {
    /**
     * @notice Deposit ERC20 token from Ethereum into Arbitrum using the registered or otherwise default gateway
     * @dev Some legacy gateway might not have the outboundTransferCustomRefund method and will revert, in such case use outboundTransfer instead
     *      L2 address alias will not be applied to the following types of addresses on L1:
     *      - an externally-owned account
     *      - a contract in construction
     *      - an address where a contract will be created
     *      - an address where a contract lived, but was destroyed
     * @param _token L1 address of ERC20
     * @param _refundTo Account, or its L2 alias if it have code in L1, to be credited with excess gas refund in L2
     * @param _to Account to be credited with the tokens in the L2 (can be the user's L2 account or a contract), not subject to L2 aliasing
                  This account, or its L2 alias if it have code in L1, will also be able to cancel the retryable ticket and receive callvalue refund
     * @param _amount Token Amount
     * @param _maxGas Max gas deducted from user's L2 balance to cover L2 execution
     * @param _gasPriceBid Gas price for L2 execution
     * @param _data encoded data from router and user
     * @return res abi encoded inbox sequence number
     */
    function outboundTransferCustomRefund(
        address _token,
        address _refundTo,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) external payable returns (bytes memory);

    /**
     * @notice Allows L1 Token contract to trustlessly register its gateway.
     * @param _gateway l1 gateway address
     * @param _maxGas max gas for L2 retryable exrecution
     * @param _gasPriceBid gas price for L2 retryable ticket
     * @param  _maxSubmissionCost base submission cost  L2 retryable tick3et
     * @param _creditBackAddress address for crediting back overpayment of _maxSubmissionCost
     * @return Retryable ticket ID
     */
    function setGateway(
        address _gateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost,
        address _creditBackAddress
    ) external payable returns (uint256);

    /**
     * @notice Allows L1 Token contract to trustlessly register its gateway. (other setGateway method allows excess eth recovery from _maxSubmissionCost and is recommended)
     * @param _gateway l1 gateway address
     * @param _maxGas max gas for L2 retryable exrecution
     * @param _gasPriceBid gas price for L2 retryable ticket
     * @param  _maxSubmissionCost base submission cost  L2 retryable tick3et
     * @return Retryable ticket ID
     */
    function setGateway(
        address _gateway,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        uint256 _maxSubmissionCost
    ) external payable returns (uint256);

    function owner() external view returns (address);

    function inbox() external view returns (address);
}
"
    },
    "contracts/tokenbridge/ethereum/gateway/IL1ArbitrumGateway.sol": {
      "content": "// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;

import "../../libraries/gateway/ITokenGateway.sol";
import "../../libraries/IERC165.sol";

/**
 * @title Common interface for gatways on L1 messaging to Arbitrum.
 */
interface IL1ArbitrumGateway is ITokenGateway, IERC165 {
    function inbox() external view returns (address);

    /**
     * @notice Deposit ERC20 token from Ethereum into Arbitrum. If L2 side hasn't been deployed yet, includes name/symbol/decimals data for initial L2 deploy. Initiate by GatewayRouter.
     * @dev L2 address alias will not be applied to the following types of addresses on L1:
     *      - an externally-owned account
     *      - a contract in construction
     *      - an address where a contract will be created
     *      - an address where a contract lived, but was destroyed
     * @param _l1Token L1 address of ERC20
     * @param _refundTo Account, or its L2 alias if it have code in L1, to be credited with excess gas refund in L2
     * @param _to Account to be credited with the tokens in the L2 (can be the user's L2 account or a contract), not subject to L2 aliasing
                  This account, or its L2 alias if it have code in L1, will also be able to cancel the retryable ticket and receive callvalue refund
     * @param _amount Token Amount
     * @param _maxGas Max gas deducted from user's L2 balance to cover L2 execution
     * @param _gasPriceBid Gas price for L2 execution
     * @param _data encoded data from router and user
     * @return res abi encoded inbox sequence number
     */
    //  * @param maxSubmissionCost Max gas deducted from user's L2 balance to cover base submission fee
    function outboundTransferCustomRefund(
        address _l1Token,
        address _refundTo,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) external payable returns (bytes memory);
}
"
    },
    "node_modules/@arbitrum/nitro-contracts/src/precompiles/ArbSys.sol": {
      "content": "// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/OffchainLabs/nitro-contracts/blob/main/LICENSE
// SPDX-License-Identifier: BUSL-1.1

pragma solidity >=0.4.21 <0.9.0;

/**
 * @title System level functionality
 * @notice For use by contracts to interact with core L2-specific functionality.
 * Precompiled contract that exists in every Arbitrum chain at address(100), 0x0000000000000000000000000000000000000064.
 */
interface ArbSys {
    /**
     * @notice Get Arbitrum block number (distinct from L1 block number; Arbitrum genesis block has block number 0)
     * @return block number as int
     */
    function arbBlockNumber() external view returns (uint256);

    /**
     * @notice Get Arbitrum block hash (reverts unless currentBlockNum-256 <= arbBlockNum < currentBlockNum)
     * @return block hash
     */
    function arbBlockHash(uint256 arbBlockNum) external view returns (bytes32);

    /**
     * @notice Gets the rollup's unique chain identifier
     * @return Chain identifier as int
     */
    function arbChainID() external view returns (uint256);

    /**
     * @notice Get internal version number identifying an ArbOS build
     * @return version number as int
     */
    function arbOSVersion() external view returns (uint256);

    /**
     * @notice Returns 0 since Nitro has no concept of storage gas
     * @return uint 0
     */
    function getStorageGasAvailable() external view returns (uint256);

    /**
     * @notice (deprecated) check if current call is top level (meaning it was triggered by an EoA or a L1 contract)
     * @dev this call has been deprecated and may be removed in a future release
     * @return true if current execution frame is not a call by another L2 contract
     */
    function isTopLevelCall() external view returns (bool);

    /**
     * @notice map L1 sender contract address to its L2 alias
     * @param sender sender address
     * @param unused argument no longer used
     * @return aliased sender address
     */
    function mapL1SenderContractAddressToL2Alias(address sender, address unused)
        external
        pure
        returns (address);

    /**
     * @notice check if the caller (of this caller of this) is an aliased L1 contract address
     * @return true iff the caller's address is an alias for an L1 contract address
     */
    function wasMyCallersAddressAliased() external view returns (bool);

    /**
     * @notice return the address of the caller (of this caller of this), without applying L1 contract address aliasing
     * @return address of the caller's caller, without applying L1 contract address aliasing
     */
    function myCallersAddressWithoutAliasing() external view returns (address);

    /**
     * @notice Send given amount of Eth to dest from sender.
     * This is a convenience function, which is equivalent to calling sendTxToL1 with empty data.
     * @param destination recipient address on L1
     * @return unique identifier for this L2-to-L1 transaction.
     */
    function withdrawEth(address destination) external payable returns (uint256);

    /**
     * @notice Send a transaction to L1
     * @dev it is not possible to execute on the L1 any L2-to-L1 transaction which contains data
     * to a contract address without any code (as enforced by the Bridge contract).
     * @param destination recipient address on L1
     * @param data (optional) calldata for L1 contract call
     * @return a unique identifier for this L2-to-L1 transaction.
     */
    function sendTxToL1(address destination, bytes c