ERC4626PriceAggregator

{{
  "language": "Solidity",
  "sources": {
    "@openzeppelin/v5/contracts/interfaces/IERC4626.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC-4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}
"
    },
    "@openzeppelin/v5/contracts/token/ERC20/extensions/IERC20Metadata.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
"
    },
    "@openzeppelin/v5/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
"
    },
    "contracts/interfaces/IAggregatorV3Interface.sol": {
      "content": "// SPDX-License-Identifier: MIT
pragma solidity >=0.7.6;

interface IAggregatorV3Interface {
  function decimals() external view returns (uint8);

  function latestRoundData()
    external
    view
    returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound);
}
"
    },
    "contracts/interfaces/IAssetHandler.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.7.6;
pragma abicoder v2;

interface IAssetHandler {
  event AddedAsset(address asset, uint16 assetType, address aggregator);
  event RemovedAsset(address asset);

  struct Asset {
    address asset;
    uint16 assetType;
    address aggregator;
  }

  function addAsset(address asset, uint16 assetType, address aggregator) external;

  function addAssets(Asset[] memory assets) external;

  function removeAsset(address asset) external;

  function priceAggregators(address asset) external view returns (address);

  function assetTypes(address asset) external view returns (uint16);

  function getUSDPrice(address asset) external view returns (uint256);
}
"
    },
    "contracts/interfaces/IPoolFactory.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.7.6;

interface IPoolFactory {
  function governanceAddress() external view returns (address);

  function isPool(address pool) external view returns (bool);

  function customCooldownWhitelist(address from) external view returns (bool);

  function receiverWhitelist(address to) external view returns (bool);

  function emitPoolEvent() external;

  function emitPoolManagerEvent() external;

  function isValidAsset(address asset) external view returns (bool);

  function getAssetPrice(address asset) external view returns (uint256);

  function getAssetHandler() external view returns (address);
}
"
    },
    "contracts/priceAggregators/ERC4626PriceAggregator.sol": {
      "content": "//
//        __  __    __  ________  _______    ______   ________
//       /  |/  |  /  |/        |/       \  /      \ /        |
//   ____$$ |$$ |  $$ |$$$$$$$$/ $$$$$$$  |/$$$$$$  |$$$$$$$$/
//  /    $$ |$$ |__$$ |$$ |__    $$ |  $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$    $$ |$$    |   $$ |  $$ |$$ |/    |$$    |
// $$ |  $$ |$$$$$$$$ |$$$$$/    $$ |  $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ |  $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$    $$ |$$ |  $$ |$$       |$$    $$/ $$    $$/ $$       |
//  $$$$$$$/ $$/   $$/ $$$$$$$$/ $$$$$$$/   $$$$$$/  $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// Copyright (c) 2025 dHEDGE DAO
//
// SPDX-License-Identifier: MIT

pragma solidity 0.8.28;

import {IERC4626} from "@openzeppelin/v5/contracts/interfaces/IERC4626.sol";

import {IPoolFactory} from "../interfaces/IPoolFactory.sol";
import {IAggregatorV3Interface} from "../interfaces/IAggregatorV3Interface.sol";
import {UnderlyingAssetOracleUpdater} from "./UnderlyingAssetOracleUpdater.sol";

contract ERC4626PriceAggregator is IAggregatorV3Interface, UnderlyingAssetOracleUpdater {
  uint8 public immutable underlyingAssetDecimals;
  IERC4626 public immutable assetToPrice;
  uint8 public immutable assetToPriceDecimals;

  constructor(
    address _erc4626CompatibleAsset,
    IPoolFactory _poolFactory
  ) UnderlyingAssetOracleUpdater(_getUnderlyingAsset(_erc4626CompatibleAsset), _poolFactory) {
    underlyingAssetDecimals = IERC4626(underlyingAsset).decimals();

    assetToPrice = IERC4626(_erc4626CompatibleAsset);
    assetToPriceDecimals = IERC4626(_erc4626CompatibleAsset).decimals();

    updateUnderlyingAggregator();
  }

  function decimals() external pure override returns (uint8) {
    return 8;
  }

  function latestRoundData()
    external
    view
    override
    returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound)
  {
    (, int256 underlyingPrice, , uint256 underlyingUpdatedAt, ) = underlyingAggregator.latestRoundData();

    // The exchange rate is the amount of underlying asset units per 1 token of the ERC4626 asset
    uint256 exchangeRate = assetToPrice.convertToAssets(10 ** assetToPriceDecimals);

    // Multiply underlying price by exchange rate and adjust decimals
    answer = (underlyingPrice * int256(exchangeRate)) / int256(10 ** underlyingAssetDecimals);
    answer = (answer * 1e8) / int256(10 ** underlyingAggregatorDecimals);

    return (0, answer, 0, underlyingUpdatedAt, 0);
  }

  function _getUnderlyingAsset(address _erc4626CompatibleAsset) internal view returns (address asset) {
    asset = IERC4626(_erc4626CompatibleAsset).asset();
  }
}
"
    },
    "contracts/priceAggregators/UnderlyingAssetOracleUpdater.sol": {
      "content": "// SPDX-License-Identifier: MIT

pragma solidity >=0.7.6;

import {IAggregatorV3Interface} from "../interfaces/IAggregatorV3Interface.sol";
import {IAssetHandler} from "../interfaces/IAssetHandler.sol";
import {IPoolFactory} from "../interfaces/IPoolFactory.sol";

abstract contract UnderlyingAssetOracleUpdater {
  address public underlyingAsset;
  IPoolFactory public poolFactory;

  IAggregatorV3Interface public underlyingAggregator;
  uint8 public underlyingAggregatorDecimals;

  constructor(address _underlyingAsset, IPoolFactory _poolFactory) {
    require(address(_poolFactory) != address(0) && _underlyingAsset != address(0), "invalid address");

    underlyingAsset = _underlyingAsset;
    poolFactory = _poolFactory;

    updateUnderlyingAggregator();
  }

  /// @dev In case the underlying asset aggregator is changed within our system, anyone can call this function to update the child aggregator (eliminates the need for redeploying the contract)
  function updateUnderlyingAggregator() public {
    address _underlyingAggregator = IAssetHandler(poolFactory.getAssetHandler()).priceAggregators(underlyingAsset);

    require(_underlyingAggregator != address(0), "invalid aggregator");

    uint8 _underlyingAggregatorDecimals = IAggregatorV3Interface(_underlyingAggregator).decimals();

    require(_underlyingAggregatorDecimals > 0, "invalid decimals");

    underlyingAggregator = IAggregatorV3Interface(_underlyingAggregator);
    underlyingAggregatorDecimals = _underlyingAggregatorDecimals;
  }
}
"
    }
  },
  "settings": {
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    },
    "optimizer": {
      "enabled": true,
      "runs": 20
    },
    "evmVersion": "paris"
  }
}}